Used Zippo 1250 for sale (2,152)

Condition: used, Horizontal Gear Hobbing Machine WMW MODUL ZFWZ 1250/3 Year of manufacture: 1982 Control: conventional Country of origin: Germany Max. gear diameter: 1250 mm Hodpswxxxcefx Ag Nsfn Gear width: 600 mm Module – max.: 16 Module – min.: 2 Cutter diameter: 240 x 280 mm Table clamping surface: 1020 mm Speed range: 28 – 200 rpm Axial feeds: 0.28 – 8 mm/min Radial feeds: 0.1 – 2 mm/min Tangential feeds: 0.16 – 4 mm/min Swivel range of milling slide - L/R: +/- 45° Rapid traverse motor: 12.5 kW Voltage: 380 V Frequency: 50 Hz Total power requirement: 5/19.5 kW

Condition: excellent (used), Fries Research & Technology Device Designation: FRT MicroProf® MPR 1250 The FRT MicroProf® MPR 1250 is a high-precision surface metrology system from the MicroProf® series by Fries Research & Technology GmbH (FRT). These systems are designed for non-destructive and contactless analysis of surface parameters such as topography, roughness, layer thickness, and more. Features of the FRT MicroProf: Device Details: Model: FRT MicroProf® MPR 1250 Item Number: 200 00 Sensor Type: CWL 300 µm Serial Number: 0904001 Measurement Principle: Chromatic confocal point sensor Light Source: Halogen lamp, white light Vertical resolution: up to 3 nm Measurement accuracy (Z): 100 nm Lateral resolution (XY): 2.5 µm Measurement angle to surface: 90° ±30° Max. sample size: approx. 310 x 310 x 50 mm Technical Data (Excerpt): XY-Stage: Type: Compact XY-cross table Travel (measurement range): 200 x 200 mm Guidance: mechanical cross roller guide Drive: DC motor with ball screw Position feedback system: Heidenhain glass scale with reference mark System resolution: 0.2 µm Repeatability: < ±1 µm Orthogonality XY: < 4 µm / 200 mm Vertical runout (per axis): < 2 µm / 200 mm Z-Axis (motorized): Type: Linear axis Travel: 50 mm (optional 100 mm) Drive: Stepper motor with spindle drive Lateral runout: < 2 µm / 50 mm Manual Coarse Adjustment (optional): Type: Dovetail guide Adjustment range: up to 300 mm sample height Measurement: Minimum point spacing (XY): 0.6 µm Sample size: approx. 310 x 310 x 50 mm Max. sample weight: 5 kg (optional 10 kg) Measuring speed: 1 µm/s up to max. 100 mm/s System: Total weight: approx. 275 kg (measurement setup: 225 kg) Footprint (measurement setup): approx. 0.9 x 0.8 m Dimensions control unit (W x D x H): approx. 0.55 x 0.53 x 0.32 m Power supply (EU/US): 110–240 V, 50–60 Hz, 16 A Power consumption: approx. 300–400 W Operating Conditions: Temperature range: 22 °C ±5 °C Temperature stability: < 0.5 °C Weight approx. 500 kg Condition: The device is in very good technical and cosmetic condition. All axes move precisely and smoothly. Scope of Delivery: MicroProf® MPR200 00 XY measuring system Control unit Connection cables Hfodpfxewh Swdj Ag Njn (Subject to technical modifications and errors. All information without obligation!) Inspection and onsite testing available by appointment. For further questions, feel free to contact us by phone.

Condition: used, 1. Decoiler Brand : SCHLOEMANN Type : Hydraulic expanding decoiler Function : Coil holding and controlled rotation Expansion control : Hydraulic Frame : Welded steel base with integrated brake Estimated capacity : 8–12 tons Coil bore : Ø 508 mm ----- 🔹 2. Straightener / Pinch Roll Manufacturer : COMEC (Société de Constructions Mécaniques de Creil) Type : Pinch roll and leveler Hedpfx Aew Dd Igog Njfn Control : Mechanical Order number : 1305.1268 Recommended lubricants : Shell Macoma, Tellus, Alvania (as per nameplate) Function : Feeds and flattens strip before slitting Secondary role : Synchronized strip puller ----- 🔹 3. Slitter Manufacturer : COMEC Type : Circular blade slitting machine Drive : Mechanical gear train Blade adjustment : Manual Blades installed : ~10 sets (visible) Function : Longitudinal slitting of metal sheets into narrow strips ----- 🔹 4. Shear (End Cropper) Manufacturer : COMEC STAMCO Type : Rotating or inline shear Function : End cropping or final length cut Control panel : Electromechanical (visible on photo) Machine Application Complete line for metal coil slitting, producing narrow strips from master coils, with upstream flattening and final end cutting. Features / Differences – Heavy-duty hydraulic decoiler by SCHLOEMANN – Mechanical straightening section from COMEC – Manual-adjust slitter with circular blades – Outfeed shear for end trimming or final cut-to-length – Older but industrial-grade line, suited for medium gauge materials

Condition: ready for operation (used), controller manufacturer: Fanuc OM, total height: 3,240 mm, total length: 4,100 mm, total width: 6,850 mm, empty load weight: 18,000 kg, additional equipment features: yes, Daewoo X: 1250 - Y: 1000 - Z: 1000 mm CNC X-axes: 1250 mm Y-axes: 1000 mm Z-axes: 1000 mm Table dimensions: 800 x 800 mm Max weight on the table: 2000 kg Admission in spindle (ISO): ISO 50 Power on the spindle: 25 kW Number of axes: 4 axes: X,Y,Z,B Toolstore: yes Tools: 90 positions Frequency: 20 -> 4500 rpm Number of pallets: 2x Power principal motor: 70 kva Cooling-system: yes Hfedpfx Agowttrmo Nen

Year of construction: 2019, condition: ready for operation (used), A Peddinghaus cutting and notching system for mitre cutting and weld bevel preparation is available. The main component of the system is the CNC 5-axis notching machine Peddinghaus SACM-1250/A, year of manufacture: 2019. The system is suitable for small to medium-sized steel construction. Intended use: Standard notching, flange thinning, web openings and other common notching shapes. Documentation available. On-site inspection is possible. Hodpfewgnglex Ag Nofn

Condition: ready for operation (used), Year of construction: 1994, The press brake was manufactured in 1994. The working length is 1250 mm with a pressing force of 600 kN. Manufacturer: Micoda Working length: 1250 mm Press force: 600 kN Weight: 4000 kg Hodpfx Agjp R Ircj Nofn Power: 10 KW

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, working width: 1,250 mm, operating speed: 10 mm/s, back gauge speed R-axis: 150 mm/s, back gauge travel distance R-axis: 100 mm, back gauge travel distance Z-axis: 1,000 mm, overall weight: 3,250 kg, total height: 2,510 mm, travel distance Y-axis: 590 mm, pressing force: 35 t, height adjustment type: electric, rapid traverse Y-axis: 110 m/min, table width: 60 mm, working length: 1,250 mm, Servo-electric press brake SAFANDARLEY type E-Brake Premium 35-1250 ES Manufacturer Netherlands - Lochem We are the official representative of SafanDarley in Poland. - Servo-electric drive - stroke 300 mm - CNC control in Y1 / Y2 / X / R axes - rear bumper in 2 CNC axes - X and R - 2D graphic control - model EC20 - light curtain - programmable - WILA tool system - upper clamp - WILA tool system - lower clamp possible dies 4V / 2V / 1V / type T with a base of 60 mm Machine in very good condition after technical inspection by the manufacturer. Max. pressure kN 350 Max. bending length mm 1,250 Max. construction height Q, standard (without tool adapter and table) mm 650 Max. press stroke mm 300 Upper beam positioning accuracy mm +/- 0.01 Max. correction for Y1 - Y2 programmable mm +/- 2.50 Max. Y-axis approach speed* mm/sec 180 Max. bending speed* mm/sec 10 Max. return speed mm/sec 180 X-axis positioning speed mm/sec 350 Max. range of stop movement - X axis mm 550 Max. range of stop movement (second stop point) - X axis mm 575 Max. range of stop movement (third stop point) - X axis mm 1,000 Repeatability of back stop positioning mm +/- 0.02 Max. range of movement of the stop - R axis mm 150 Repeatability of positioning R axis mm +/- 0.10 Speed of positioning R axis mm/sec 100 Weight kg 3,250 Connected power kW 11 Machine length mm 2,230 Machine width mm 1,775 Machine height - transport dimension mm 2,510 Mains voltage 3/N/PE 50Hz – 400/230V Machine connected - ready for presentation at the headquarters in Warsaw. Hsdpsv Eam Nefx Ag Njfn Immediate availability

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: ABCM 1250/3, type of input current: three-phase, Gas burner for I-beams. Hfedsrbif Tspfx Ag Nsn manufacturer - Peddinghaus Germany; type - ABCM 1250/3; control - Fagor; The device is connected and functional.

Condition: new, Year of construction: 2025, Single band console decoiler RAZ-ENO 1250/2 Hfedpfx Agoxd Rgme Njn - Loading capacity 2.000 kg - Inner φ 480-530 mm - with 4 clamping arms, ball bearings and with disc brakes - max coil width: 1.250 mm

Condition: used, Year of construction: 2018, Transnorm belt conveyor GF 2200-1120-1000 RA2391 Technical data: Conveying length (NL): 2200 mm Framework width (NB): 1120 mm belt width (GuB): 1000 mm Framework width including Motor (MB): 1500 mm height (BH): 110 mm Side guides height: 400 mm Drive: SEW gear Motor with Movi-Mot Conveying speed m/s: freely adjustable between 0.4-1.3 m/s Electrical data: 50Hz V380-500, kW 1.1 Optionally available: Supports Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. Hfsdpfx Aov S Nptjg Nen We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 1993, condition: ready for operation (used), A complete cutting line for sheet metal processing is available. 1) Decoiler Schleicher H-B4-1250, year of manufacture: 1983, power: 11kW, max. load capacity: 12500kg, strip thickness range: 0.5mm-1.25mm, max. strip width: 1100mm. 2) Straightening machine Schleicher RM 8-53/160, year of construction: 1980, power: 7.68kW, strip thickness range: 0.5mm-1.25mm, strip width range: 300mm-1000mm. 3) Trimming shears. 4) HSK HSKW/SF shears, year of manufacture: 1993, max. strip thickness: 1.5mm, max. material width: 1280mm. 5) Stacking line Schleicher, year of manufacture: 1980, max. load capacity: 1000kg, strip width range: 300mm-1000mm, strip thickness range: 0.5mm-1.25mm, feed length range: 200mm-1250mm, power: 1.5kW. On-site inspection is possible. Hfjdpfx Agow Az Rpe Nen

Condition: used, Year of construction: 2013, DMG Mori Seiki CTX Gamma 1250 CNC Turning Centre with DMG CNC Control (Ergoline Siemens), 12 Position Tool Turret, Tailstock, Coolant Tank with Clarifier, DMG Filter Unit, Spindle Speed 2500rpm Max, Machine Weight 17000kg. S/No. 00650000201 (2013) - CE Mark Hsdpjxdb Etjfx Ag Nefn Please Note: These lots are located in Ferrara, Italy. All/Any tooling is being offered as specifically described

Condition: good (used), Year of construction: 1970, grinding diameter: 1,200 mm, grinding length: 5,000 mm, Accurite digital readout Chuck diameter 900 mm Crank shaft head counter balance weight 2 x 4 different sizes  4 x steady rest dressing device  6 segment stone up to 1500 mm diameter In feed stone 0,0025 - 0,050 mm Table feed rate 50 - 3975 mm/Min Coolant & Filtration system Centre height: 600mm Grinding Ø: 1200mm Grinding length: 5000mm Grinding stone dimensions:1600 x 100mm Hjdpfx Aowrxqxjg Njfn Grinding stone speeds: 1620Rpm Length: 17500mm Width: 5500mm Height: 2200mm Weight: 60000kg

Condition: used, Year of construction: 2018, operating hours: 1,850 h, mast type: telescopic, fuel type: diesel, Lifting capacity: 450 kg Working height: 4.030 cm Rental currency: EUR Please contact Jan De Lepeleer for more information Hfodewyr I Hepfx Ag Nen

Condition: new, Year of construction: 2025, Single band decoiler 1.250 mm - Loading capacity up to 4.000 kg - Inner φ 480-530 mm Hfodpfoxd Rgaex Ag Nen - with 5 clamping arms, ball bearings and with disc brakes - max coil width: 1.250 mm

Condition: used, Year of construction: 1970, machine/vehicle number: Lager-Nr.: 2298, Force: 100 tons Windows: 500mm Daylight: 800mm Distance between columns: 1260mm Table height over floor: 1450mm Table: 1250x1000mm Ram: 1250x1000mm Speed: Down: 400mm/sec. Work: 72mm/sec. Hsdpodc Dcqsfx Ag Nefn Up: 300mm/sec. Stroke: 500mm Die cushion: 40 tons, stroke: 250mm Requested power: 50PS Weight: 22 tons Height: 4500mm Control Siemens S7 Sick light guards Floor standing

Condition: ready for operation (used), Circumferential speed: 80m/s, an on-site inspection is possible. Hfedsrp E Nnepfx Ag Njn

Condition: used, Year of construction: 1995, Dimensions: Hfjdpfxslp Idle Ag Nen H = 1950 mm L = 3860 mm D = 2300 mm

Condition: like new (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: K200-00847, Equipment: rotational speed infinitely variable, KUPER FL-INNOVATION 1250 FACE/BUTT JOINT VENEER SPLICER '2009 MACHINE CONDITION: EXCELLENT! Hsdpfjvz U A Rsx Ag Nsfn ADDITIONAL OPTION: Purchase a new chain and other spare parts for an extra 1,000 EUR. Designed for edge-to-edge splicing of flat veneers with thicknesses from 0.3 to 1.5 mm (with possibility to splice up to 2.5 mm using an alternative glue application system). Suitable for production processes utilizing high temperatures and tensile forces, such as longitudinal profile foil wrapping or membrane press laminating. Elements are bonded using urea-based adhesive. The glue is applied to the veneer edge in the machine using an integrated application station with a glue tank. The machine is equipped with a state-of-the-art adhesive application system for one veneer edge, consisting of a dosing roller (immersed in adhesive), an application roller, and a precise dosing system. Key Features: - Integrated glue application in the machine - Robust steel machine frame - Durable lacquer finish - Infeed aligning discs - Stainless steel transport chain - Heavy-duty cylindrical gearbox with articulated shafts - Extended, adjustable heating zone - Cleaning system for transport tracks to remove debris and veneer moisture - Tilting control console for monitoring and operating all essential functions Technical Specifications: - Passage width under machine body: 1,250 mm - Minimum element width: 45 mm - Minimum element length: 500 mm - Element thickness: 0.3 – 1.5 mm - Feed speed (infinitely variable): * In-machine glue application: 20–28 m/min * Pre-applied glue: 20–50 m/min - Heating zone length / temperature: 1,200 mm / max. 220°C - Power supply: 400V / 50 Hz, 3Ph - Total connected load: 5.0 kW / 9.3 KVA - Air requirement: 5 NL/min at 6 bar - Dimensions (L x W x H): 2,370 x 1,960 x 1,470 mm Air-conditioned adhesive unit – maintains constant glue temperature in the reservoir, ensuring optimal adhesive properties and preventing premature gelling or curing. This improves bonding quality, reduces glue consumption, and shortens splice processing time, especially during periods of high ambient temperatures. Possibility to test the machine in Poland.

Condition: excellent (used), Year of construction: 2011, CNC twin-spindle turning center Control: CNC path control including 19" TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and with ShopTurn 3 G TECHNICAL DATA Max. turning diameter 340 mm Spindle distance 1470 mm Turning length 1135 mm Swing over bed 700 mm Swing to tool carrier 2540 mm Travel paths: X1 – Tool carrier I 270 mm Y1 – Tool carrier I 120 mm Z1 – Tool carrier I 1200 mm X2 – Tool carrier II 195 mm Y2 – Tool carrier II 80 mm Z2 – Tool carrier II 1200 mm X3 – Counter spindle slide 180 mm Z3 – Counter spindle slide 1200 mm Main spindle Integrated spindle motor ISM 102 Drive power (100/40% duty cycle) 40/48 kW Torque (100/40% duty cycle) 570/680 Nm Speed range 0-4000 rpm Bar diameter 102 mm Draw tube inner diameter 104 mm C-axis and spindle brake (angular resolution) 0.001° Counter spindle Integrated spindle motor ISM 76 Drive power (100/40% duty cycle) 25/32 kW Torque (100/40% duty cycle) 280/380 Nm Speed range 0-5000 rpm Bar diameter 65/75 mm C-axis (angular resolution) 0.001° Slide 1 Tool carrier (direct drive) Number of tools 12 Tool holder diameter VDI (DIN 69880) 40 mm Maximum power (100/40% duty cycle) 10.9/14.2 kW Maximum torque (100/40% duty cycle) 26/34 Nm Speed range 40 – 10,000 rpm Slide 2 Tool carrier (direct drive) Number of tools 12 Tool holder diameter VDI (DIN 69880) 40 mm Maximum power (100/40% duty cycle) 10.9/14.2 kW Maximum torque (100/40% duty cycle) 26/34 Nm Speed range 40 – 10,000 rpm Slide 3 Rapid traverse speed X/Z axis 30/45 m/min Tool resolution Z axis 0.001° Feed force (40% duty cycle) X/Z axis 16/13 kN EQUIPMENT/ACCESSORIES Hsdpfxowcd S Nj Ag Nofn  IRCO ILS-RBK 100/16 short-bar loader  Various main spindle reducers  NC-controlled workpiece retrieval device from both the main and counter spindles The device consists of an NC-controlled *Horizontal axis *Swivel unit *Vertical axis *2-jaw gripper for interchangeable gripper jaws  Conveyor belt for removing workpieces from the machine  8/20 bar coolant system with immersion cooler  Chip conveyor  Oil mist extraction  Control cabinet cooling unit (up to 40°)  Counter spindle slide  Easy-Tool monitor  1 collet chuck for quick-change clamping head size 100 for the main spindle  1 collet chuck for quick-change clamping head size 100, Nova Achsfix for the counter spindle  Approx. 40 various quick-change clamping heads size 100 (complete inventory)  Pneumatic tool changer, ø 100 mm  Approx. 50 various tool holders, fixed and driven (complete inventory)  Mounting elements  Documentation

Condition: new, Year of construction: 2025, neu 2025 070116 prompt, Zwischenverkauf v Türkei 10900 € 209.28 € 1 1250 kg 1300 mm 450 - 550 mm 400 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control WITH PNEUMATIC DOWNHOLER Hedpfx Agewv H Awe Njfn

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, 1 used steam boiler Hodpfx Aewra Ewog Njfn ----- Manufacturer: LOOS Gunzenhausen Type: U-HD 1250 Heating surface approx.: 20 sqm Max. boiler output: 1,250 kg/h Operating pressure: 13 bar Increased test pressure: 23.4 bar Water content at normal level approx.: 993 l Full water content approx.: 1,365 l Year of construction: 2000 Equipped with Weishaupt gas burner type G7/1-D, ZMD, 300-1,750 kW, gas control section, control cabinet, feedwater pump and the available rough and fine fittings.

Year of construction: 2013, condition: ready for operation (used), Turning diameter: 500mm, turning length: 1200mm, bar capacity: 102mm, travel X/Y/Z: 490mm/250mm/1210mm, speed: 5000rpm. Tool positions: 24, tool holder: HSK-A63. Machine dimensions X/Y/Z: approx. 5600mm/2600mm/2200mm, weight: approx. 10000kg. Documentation available. On-site inspection is possible. Hedpowm Npbefx Ag Njfn

Year of construction: 2003, condition: ready for operation (used), Saw blade diameter: 300mm, panel format: 1200mm/1200mm, dimensions X/Y/Z: 4300mm/2700mm/1900mm, weight: approx. 2000kg. Including extraction system (3000m³/h) and big-bag bagging system. Hfsdpfx Agjtva A Rj Non

Condition: ready for operation (used), Year of construction: 2019, The multihead weigher was briefly used for mozzarella, includes basic module, power supply, distributor drive, dosing chute, storage container, weighing container, chute set, hopper, operating unit, holder, accessory set, feed hopper, collecting container and other elements. On-site inspection is possible, the machine is already dismantled and ready for loading, with documentation. The machine has been used very little. Hedpfx Aewbpy Aog Njfn