Used L + Z Lathe for sale (77,336)

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, L & Z Lathe KAMI DKM 410 L incl. digital display & accessories -UNUSED -CE marking -Digital display for 3 axes -Center height 205mm -Swing over bed 410mm -Swing over cross slide 530mm -Swing over carriage 240mm -Distance between centers 1000mm -Spindle bore 52mm -Speed range (geared) 55 - 2000 rpm -Automatic longitudinal / facing feeds -Threading / Metric / Inch etc. -Tailstock spindle diameter 32 -Tailstock spindle taper MK 4 -Work light -Electric chuck guard -Four-way tool post -Three-jaw chuck 200mm -Four-jaw chuck -Chip guard -Chip drawer -Storage compartments & tools -Faceplate -Documentation Dimensions L x W x H 1.9 x 0.8 x 1.6 meters / Weight 890 KG Hnodpfx Anoz S Du Sjdsu Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, L&Z Lathe KMUTH BASIC Plus incl. 3-axis digital display - Year of manufacture 2011 - CE marking - Three-axis digital display - Center height 150mm - Max. turning diameter 300mm Hodpfsz Hwx Esx Andjnu - Max. turning diameter over support 178mm - Max. turning diameter without bridge 430mm - Center distance 810mm - Spindle bore 38mm - Spindle speeds (geared) 60 - 1550 rpm (9 steps) - Automatic longitudinal / facing feeds - Spindle mount - Camlock D1 - 4" - Tailstock taper MK 3 - Quill travel 100mm - Bed width 180mm - Multifix base with insert - Electric chuck guard - Work light - Coaxial center - 3-jaw chuck - 2 x steady rests - Documentation Dimensions: L x W x H 1.6 x 0.7 x 1.6 meters / Weight 550 kg Errors and omissions excepted.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, L & Z Lathe / DREHMA D 410x1500 / New - Unused / Showroom Machine -CE marking -3-axis digital display -Turning diameter over bed: 410 mm -Turning diameter over cross slide: 225 mm -Turning diameter in the crotch: 580 mm Hedpfjzv H Iksx Andonu -Turning length: 1500 mm -Spindle bore: 52 mm -Speed range (geared): 45 - 1800 rpm -Automatic longitudinal/facing feeds -Threading / Metric / Inch etc. -Tailstock MK 4 -Drive power: 3.5 kW -Central lubrication -Electric chuck guard -Chuck guard via steel support -Fixed and traveling steady rest -Multifix base with inserts -3-jaw chuck 200 mm -4-jaw chuck 250 mm -Faceplate -Coolant system -Work light -Foot brake -Traveling center & drill chuck -Machine feet -Documentation Dimensions: L x W x H 2.2 x 0.1 x 1.6 meters / Weight 1850 kg Errors and omissions excepted.

Condition: used, L + Z lathe WEILER, type LZ PRIMUS GS Machine no. 1984, year of manufacture 1981 Distance between centers 400 mm Turning diameter over bed 250 mm Height of centers over bed 125 mm Turning diameter over carriage 140 mm Height of centers over carriage 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm, 18 steps Feed in longitudinal and facing directions Chuck flange, short taper DIN 55022, size 4 Tailstock internal taper MK 2 Drive power 1.1 kW and 1.5 kW, pole-reversing Power supply 380 volts, 50 Hz - Spindle speed controlled via 2 motor speeds and 9 gear stages - 3-jaw chuck WEILER, Ø 125 mm, with soft jaws - Quick-change tool holder MULTIFIX with 2 interchangeable cassettes - Coolant system - Collet set Ø 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 14 / 15 / 16 / 18 / 20 mm - 1 centering point for collet chuck - Turning center flange - Emergency stop - Folding chuck guard with electrical monitoring - Splash guard Space requirement L x W x H 1200 x 650 x 1380 mm Weight 325 kg Good condition Hnjdpfx Anjz N H Dqedju

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Hnsdpfx Anozkbirsdou Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79265 Machine Serial Number: STA00197 £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, power: 9 kW (12.24 HP), We offer for sale a used LINKS S.r.l. automatic zig-zag cotton wool production and packing line, manufactured in Italy in 2011. Manufacturer: LINKS S.r.l., Italy Year of manufacture: 2011 Line configuration: Z/AP + ASA + L/CC Serial numbers: 300–301 The line is designed for the automatic production, zig-zag forming and packing of absorbent cotton wool in polyethylene bags. Hodpfx Aszxnyysndjnu Technical specifications: Capacity: up to 25 packs/min at 100 g (approx. 1,500 packs/hour) Electrical power: 9 kW Power supply: 380 V / 50 Hz / 3-phase Operation: fully automatic cycle Operators required: 1 Packing/product formats: 50 g, 100 g and 200 g Equipment includes sets of forming/packing chambers for 50/100 g and 200 g Original technical documentation included The line consists of the Z/AP + ASA + L/CC units, covering the zig-zag forming, conveying and pressing stages and automatic packing process. Suitable for production of absorbent cotton wool, medical cotton wool and cosmetic cotton wool. The equipment is sold as used machinery. Further technical information, photographs and original documentation are available upon request. Please contact us for additional information, inspection arrangements or further photographs.

Condition: used, Harrison Alpha 1350XS CNC Toolroom Lathe (2010) Hsdpfx Anjzq Ddxjdsnu Swing Over Bed 350 mm Swing Over Cross Slide 196 mm Swing in Gap 535 mm Distance Between Centres 650 mm Maximum Turning Diameter 350 mm Spindle Speed Range 1 – 3,500 rpm Fanuc Oi-TD CNC control Harrison Alpha conversational programming Fanuc Manual Guide i Full ISO G-code programming capability 2-axis CNC control (X and Z) Electronic handwheel operation Machine Weight Approx. 1,800 kg Machine Dimensions (L × W × H) 2,400 × 1,700 × 1,500 mm

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Weiler Praktikant VCD Precision Lathe (2021) Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2021 Condition: Used, excellent, like new, incl. new maintenance and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed saddle guideway length: 350 mm Bed width: 205 mm Tool shank cross-section (H x W): 20 x 20 mm Height from top slide to turning centre: 30 mm Spindle head according to ISO DIN 702-3 (DIN55027) size 5 Hnedpfx Asztyrqendsu Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4,000 rpm Number of gear stages: 1 Number of speeds: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Quill taper: 3 Morse taper Weight, without packaging and accessories: approx. 1,150 kg Dimensions (L x W x H), net: 1,720 x 890 x 1,700 mm Headstock / Rear cover / Sliding guard: Light grey RAL 7035 Machine base / Machine bed: Basalt grey RAL 7012 Display housing: Blue NCSS 4550-R80B

Condition: ready for operation (used), functionality: fully functional, Optimum lathe D330 x 1000 SG -Distance between centers: 1000 mm -Swinging diameter over bed: 330 mm -Swinging diameter over cross slide: approx. 190–200 mm -Spindle bore: approx. 38 mm -Speed range: approx. 70 – 2000 rpm (stepped) -Feeds: longitudinal and cross, automatic -Thread cutting: Metric / Inch Hnsdpfeztdv Tsx Andsu -Motor power: approx. 1.5 – 2.2 kW -Voltage: 400 V / 3 phases -Tailstock: MK3 -Spindle: MK5 -Work light -Three-jaw chuck -Multifix system with 1 steel holder -Machine feet -Chuck guard Dimensions: L x W x H 1.9 x 0.7 x 1.5 meters / Weight 700 kg

Year of construction: 1955, condition: used, Union model L.2.A.S. 5" x 24" Lathe. Backgeared and Screwcutting lathe with a detachable gap bed. A practical and characterful old lathe that works well and has plenty of capacity in a compact size. From the family agricultural engineering workshop, which is now sold, hence the lathe is for sale. Hodpfx Ansz Hifdjdenu 3-phase 415v, so ideal for conversion to variable-speed drive from a 1-phase to 3-phase inverter (not included). 3-jaw chuck, faceplate and a collection of changewheels for screwcutting. It works. I can send a video of it running. Buyer to arrange and fund the shipment. Foklifting onto your van / truck may be possible with the agreement of the new property owner. Please contact me if you would like to arrange this. Location is near Kings Lynn, Norfolk, UK. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, L + Z Lathe WEWAG Model 250 / 1500 make no. 20953 year of construction approx. 1975 center distance 1500 mm nominal turning diameter over bed Ø 500 mm turning diameter over bed max. Ø 510 mm Center height over bed 255 mm turning diameter over support Ø 300 mm Hedpslzm Eqjfx Andjnu Center height over support 150 mm spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm. 24 steps lathe chuck support short taper DIN 55022 tailstock inner taper MK 5 drive power 4 kW and 6,7 kW pole-changing - 3-jaw lathe chuck BISON, Ø 250 mm - steel holder 4-fold for turning - fixed lynette - control cabinet fixed on the back of the machine weight 2500 kg

Condition: excellent (used), ROMI GL 240 2 Axis CNC Lathe Swing over Z axis cover mm 420 Hnjdpfx Ajzu Nggjndou Maximum cutting diameter mm 300 Maximum cutting length mm 400 Travel (X axis) mm 188 Travel (Z axis) mm 400 Spindle nose ASA A2-5" Spindle hole diameter mm 58 Bar capacity (dia.) mm 51 Speed range rpm 6 to 6000 Rapid traverse (X & Z axis) m/min 30 Number of stations atc 12 AC spindle motor hp/kW 20/15

Condition: used, L + Z Lathe WAFUM Type TUD 40 Machine no. No. 35689 Year of construction 1975 Center width 1500 mm Turning diameter over bed Ø 440 mm Center height above bed 220 mm Center height above support Ø 125 mm Spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm 36 steps Chuck flange short taper DIN 55027 size 6 Inner tailstock taper MK 5 Drive power 4 and 6.7 KW - Spindle speed via 2 motor speeds and 18 gear stages Hsdpew Uf Hwjfx Andenu - 3-jaw lathe chuck Ø 315 mm BISON with 2 sets of chuck jaws (lathe and drilling jaws) - MULTIFIX size B quick-change steel holder with 2 interchangeable cassettes - Fixed lynette with plain bearing inside Ø 125 mm - Moving lynette with plain bearing inside Ø 100 mm - Guide rail for turning slim cone with automatic longitudinal feed - 1 piece rotating center point - Hinged chuck guard Space requirement L x W x H 3100 x 1200 x 1450 mm weight 3000 kg good condition

Condition: used, Mechanic lathe LESTO Scintilla (Switzerland), model GD 1124 CR Machine no. 6T 7868, year of manufacture approx. 1975 Electrical problems with the capacitor motor Drive power: 0.44 kW Mains connection: 230 volts, 50 Hz - Fixed steady rest - Collets Hnjdpfxoz Ek Rxo Andsu - Faceplate Space required L x W x H: 1100 x 500 x 400 mm Weight: approx. 90 kg Good condition - Electrical problems with the capacitor motor

Condition: used, Year of construction: 1989, functionality: not functional, turning length: 600 mm, turning diameter: 350 mm, spindle bore: 105 mm, spindle motor power: 22 W, total length: 3,063 mm, total width: 1,660 mm, overall weight: 4,300 kg, Equipment: documentation/manual, The machine is not functioning due to a fault in the regulator. All the machine's mechanical properties are perfect. Hnodpszwdamjfx Andju The machine is very rigid and can achieve tolerances as tight as 0.01 mm. It can also be used as spare parts.

Condition: good (used), Year of construction: 1998, functionality: fully functional, magnetic sign, 170x450mm Clean and well-maintained, with a paper filter. Hsdpfx Anjzicflodsnu

Condition: used, L + Z Lathe WEILER Model Praktikant 800R Machine No. 3309 Year of manufacture: 1984 Centers distance: 800 mm Swing over bed: 280 mm Swing over cross slide: 160 mm Center height over bed: 140 mm Center height over cross slide: 80 mm Spindle bore: 36 mm Feeds: longitudinal and cross Chuck mounting: Short taper DIN 55027 size 5, 4x M10 Tailstock taper: MT 3 Tailstock quill travel: 90 mm Spindle speed: 42 – 2000 rpm Drive power: 1 / 1.6 kW Electrical connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gear steps - 3-jaw scroll chuck BILSING Ø 160 mm with 1 set of stepped jaws and 1 set of soft jaws - MULTIFIX quick-change toolpost size A with 3 exchangeable toolholders - Live center Hedpoyg Rfiofx Andsnu - Emergency stop - Folding chuck guard - Coolant system - Operating manual with electrical schematic - Very low operating hours Required space (L x W x H): 1900 x 700 x 1300 mm Weight: 600 kg Very good condition

Condition: used, L + Z lathe WEILER, Type Condor 81 A Machine No. 36553, Year of manufacture approx. 1985 Hedpek S Ht Ajfx Andenu Distance between centers 750 mm Swinging diameter over bed 330 mm Distance between centers above bed 165 mm Swinging diameter over cross slide 180 mm Distance between centers above cross slide 90 mm Spindle bore 40 mm Chuck mount Short taper DIN 55027, size 5 Tailstock internal taper MK 3 Tailstock quill travel 110 mm Spindle speed 45 - 2800 rpm, 16 steps Drive power 3 kW Mains connection 400 Volt, 50 Hz - Spindle speed via 16 gear stages - 3-jaw chuck Ø 160 mm RÖHM with boring and turning jaws - Quick-change tool holder Multifix size B with 3 inserts - Automatic feed in longitudinal and facing directions - Electro-mechanical spindle brake - Emergency stop - Coolant tank with pump in the machine base, without supply line to the work area - Folding chuck guard - Splash guard - 1 rotating center - Electrical diagram and operating manual Space requirement L x W x H 1850 x 950 x 1400 mm Weight 1100 kg Good condition

Condition: used, L + Z Lathe ZMM - SLIVEN (Bulmak - Bulgaria) Type CU 325 Machine No.: 8169 Year of manufacture: 2002 Centre distance: 1000 mm Swing over bed: 320 mm Centre height over bed: 160 mm Swing over cross slide: 190 mm Centre height over cross slide: 95 mm Spindle bore: 32 mm Spindle speeds (forward): 85 - 2000 rpm, 12 steps Spindle speeds (reverse): 130 - 1300 rpm, 6 steps Feeds: longitudinal and cross Chuck flange: short taper DIN 55027 size 5 Tailstock quill taper: MT 3 Drive power: 2.2 kW Power supply: 400 Volt, 50 Hz - 3-axis digital readout RSF, type Z 730 - Spindle speed adjustable in machining direction via 12 gearbox steps - Spindle speed adjustable in counter direction via 6 gearbox steps - 3-jaw chuck BISON Ø 160 mm with 1 set of stepped jaws - 4-way universal tool post - Coolant tank with pump integrated in machine base - Spindle brake operated via direction lever Hnedpfx Anevt U Tmodsu - Emergency stop via foot pedal and emergency switch - Foldable chuck guard - Machine lamp - Splash guard - Travelling steady rest - Quick-change drill chuck with MT 3 taper - Multiple change gears - Operating manual with electrical diagram Installation dimensions (L x W x H): 2100 x 800 x 1600 mm Weight: 750 kg Good condition

Condition: used, Year of construction: 2016, Waste disposal system consisting of: 1 Clean air dust collector with briquetting press JP 350-L 1 Clean air dust collector with rotary valve airlock JZ 350-L Year of manufacture: 2016 Technical data JP 350-L: Suction nozzle: 350 mm Nominal volume flow: 6580 m³/h Maximum volume flow: 8000 m³/h Negative pressure at nominal volume flow: 2750 Pa Motor power: 11 kW Rated speed: 3000 rpm Technical data briquetting press CS3-12: Throughput capacity max. 50 kg/h or 0.75 m³/h (material-dependent) Hodpsz Rrbdofx Andjnu Motor, hydraulic pump: 3.0 kW Motor, agitator: 0.37 kW Motor, dosing screw: 0.75 kW External fuse: 16A Briquet diameter: 65 mm Weight: 780 kg Storage container: 1200 x 1200 mm Overall external dimensions: 3150 x 1625 x 2742 mm Space required: 4500 x 3000 x 2900 mm Availability: approximately 11/2027 Location: Hesse

Condition: used, L + Z Lathe WEILER Type Praktikant 800R Machine No. 3315 Year of manufacture: 1984 Center distance: 800 mm Swing over bed: 280 mm Swing over cross slide: 160 mm Center height over bed: 140 mm Center height over cross slide: 80 mm Spindle bore: 36 mm Feeds: longitudinal and face Chuck mount: short taper DIN 55027 size 5, 4x M10 Tailstock taper: MK 3 Quill travel: 90 mm Spindle speed: 42 - 2000 rpm Drive power: 1 / 1.6 kW Electrical connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gearbox steps - 3-jaw scroll chuck RÖHM ZS Ø 160 mm with 1 set of stepped jaws - MULTIFIX quick-change tool post size A with 3 tool holders - Emergency stop Hnedpfx Ansyr R Dcjdju - Hinged chuck guard - Operating manual with electrical diagram Required space (L x W x H): 1900 x 700 x 1300 mm Weight: 560 kg Good condition

Condition: ready for operation (used), Year of construction: 1985, Immediately available, free of encumbrances: L & Z lathe, Elliott Type Concord 460 Year of manufacture 1985 Swing over bed 550 mm Swing over cross slide 310 mm Turning length 1000 mm Spindle bore 71 mm Drive power 7.5 kW Spindle speeds 10 – 1000 rpm Hsdsz Ixh Depfx Andsnu Coolant system Chuck Tool holder with inserts Weight 2.5 tons Price: EUR 1,750.00 plus VAT, ex works.

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2552 Year of manufacture: 1983 Centre distance: 1000 mm Swing over bed: 420 mm Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Tailstock taper: MK 4 Motor power: 5.5 kW Power supply: 380 Volt, 50 Hz - Spindle speed via 12 gearbox steps - EMCO 3-jaw scroll chuck Ø 200 mm with turning and boring jaws - Multifix size B quick-change tool post with 3 change cartridges - Automatic longitudinal and face feed - Coolant system - Spindle brake - Emergency stop - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Hedpfx Aoykca Hendjnu Weight: 1400 kg Very good condition

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Hedpfx Asyah Rvendjnu Machine No. 1-004/2581 Year of manufacture: 1984 Centre distance: 1000 mm Swing over bed: 420 mm Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Tailstock taper: MT 4 Motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle speeds via 12-step gearbox - 3-jaw scroll chuck AROWA Ø 200 mm (only one set of chuck jaws) - Multifix quick-change tool post, size B, with 3 tool holders - Automatic longitudinal and cross feed - Coolant system - Spindle brake - Emergency stop - Splash guard - Fixed steady rest Ø 160 mm - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1500 kg In very good condition

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Hnedpfx Anjxdmgvedju Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm