Used Zprinter 650 for sale (2,784)

Condition: ready for operation (used), Year of construction: 2004, overall weight: 5,000 kg, spindle motor power: 21,000 W, number of axes: 4, This 4-axis SCHÜCO Profilbearbeitungscenter 299 650 was manufactured in 2004. It features a powerful 21 kW motor and operates at a voltage of 380 V. With a maximum operating pressure of 0.8 MPa and a weight of 5,000 kg, this machine is designed for robust performance. If you are looking to get high-quality machining capabilities, consider the SCHÜCO Profilbearbeitungscenter 299 650 universal machining centre we have for sale. Contact us for further details. Csdpsypcgqefx Ac Norb • Voltage: 380 V • Frequency: 50 Hz • Current consumption: 42 A • Maximum operating pressure: 0.8 MPa • Nominal pressure: 0.6 MPa • Maximum air consumption: 200 NL/min Additional equipment • Wireless handheld scanner

Condition: excellent (used), Year of construction: 2008, operating hours: 1,386 h, Salmon Slicer Make: Marel Model: 650 Built 2008 Low running hours: 1386 Credpfx Asycr Ecsc Njb Serviced and maintained Very Good condition

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet Crsdpfx Acorb E Ezj Nob -Tool cabinet: Drawer cabinet on a mobile base, stable design -3 drawers: layout/height see photos, shelf can be opened at the top -lockable: without key -Dimensions: WTH 650/660/H1200 mm -Weight: 82 kg

Condition: used, Year of construction: 1998, material width 100 - 450 mm Codpfx Aevuugisc Njrb material thickness 1,0 - 14,0 mm coil weight 10,0 t coil internal diameter 470 - 520 mm coil external diameter 1100 - 2000 mm no. of straightening rolls 12 straightening roll diameter 2x70 / 2x96 / 8x127 mm number of draw-in rolls 2 inlet roll diameter 160 mm min. material width 100 mm speed 15 m/min power requirement 75,0 kW weight of decoiler 6,4 t weight of straightening machine 12,8 t dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm Straightening machine RMS Vario-12-70/96/127-450 with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge Decoiler HES 12-650 with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion hydraulic coil lifting device hydraulic loop bridge coil loop control via ultrasonic cropping shears HSO 150-0450 working direction from left to right as is where is, WITHOUT putting into operation - Video at seller's site before dismantling available

Condition: excellent (used), Year of construction: 2014, Clamping force: 650 t Screw diameter: 60 mm Distance between tie bars V: 1020 mm Distance between tie bars H: 1020 mm Working hours: 50.000 h Type: Horizontal Drive: Hydraulic \+ Cooling water flow controller (2x 6 circuits) Credpfx Acjyzylvj Njb \+ Robot Sepro SR SDR5X35 HL S5 TRANS (2014) \+ 2x Magnetic platten

Condition: new, Year of construction: 2025, cutting diameter 650 mm saw band length 8200 x 54 mm cutting width 1,6 mm Capacity 90° - rectangle 650 x 850 mm Capacity 90° - square 650 x 650 mm total power requirement 5,5 kW / 2775 Nm weight of the machine ca. 6400 kg dimensions of the machine ca. 2700 x 1500 x 4100 mm The KLS 650 x 850 is a semi-automatic and column guided horizontal bandsaw. Standard specifications - Swarf Brush - Hydraulic Blade Guide - Hydraulic Vice - Hydraulic Blade Tension - Blade Breakage Switch - Stop System - Automatic Ball Screw Lubrication - Led Lighting - Swarf Conveyor - Swarf Carrying - 1400 mm Feeding Drive - Double Roller Table - Material End Detector - Program Saving System - USB Connection Output - PLC Control & Touch Screen - Inverter Optional specifications - Laser Line Credpjyk Ikqsfx Ac Nob - Lubrication Mist - V Shape Vice - Extra Double Roller Table - Upper Clamp System - Curve Cutting Detecting Sensor The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: new, cutting diameter 650 mm saw band length 7730 x 54 mm cutting width 1,3 mm Control halbautomatisch Cutting area - square 650 x 650 Cutting area - flat 650 x 750 Cedpfxjyk Ih Ae Ac Nerb total power requirement 5,5 kW / 750 Nm weight of the machine ca. 4550 kg dimensions of the machine ca. 2100 x 1550 x 3900 mm The KSY 650 x 1050 is a semi-automatic and column-guided horizontal bandsaw. In addition, the machine has a driven roller table which is 2 meters long on both the front and rear sides. Optional Specifications - Motorized System For Roller Table - Laser Line - Extra Double Roller Table - PLC-Screen - Anti-Vibration System The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, Used Rollfix Fritsch 600/650E Dough Sheeter Suitable for all types of dough, for rolling and unrolling all types of bread doughs, rye, wheat, and mixed doughs. Key features of the machine: - Digital control - Flour duster - Long roller - Conveyor belt width: 650 mm - Roller gap: 0.3 – 45 mm - Gentle and uniform dough sheeting - Thin dough production - Processing dough blocks up to approx. 15 kg - Unwinding speed: 93.3 cm/sec - Mobile on castors - Power: 1.4 kW Crodpfx Acoyfr Txo Neb The machine is in perfect condition. 6 months warranty on all parts.

Condition: used, machine/vehicle number: 005637, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Cjdpfsvw Ev Hex Ac Njrb Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 1300 mm Max feed speed: 50 m/min Operating Units Right Side: 11 nr Operating Units Left Side: 12 nr

Condition: used, machine/vehicle number: 005635, Position 1: Panel Feeding and Loading IMA + MEINERT-COMBIMA/II/650/A/R3 Crodowuudyspfx Ac Nob

Condition: used, machine/vehicle number: 005642, undefinedPosition 2: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Crsdjwuciwspfx Ac Neb undefinedPosition 4: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3

Condition: used, Year of construction: 2019, functionality: fully functional, overall weight: 5,500 kg, fuel type: electric, – Manufactured in Poland – Year of manufacture: 2019 Cedeyw Sqiepfx Ac Nsrb – Vibratory feeder TECHNICAL SPECIFICATIONS: – Inlet width: 650 mm – Inlet height: 250 mm – Shaft diameter: 600 mm – Shaft width: 650 mm – Main motor: 110 kW – Number of knives: 2 pcs. – Knife length: 650 mm – 4 lower driven toothed shafts – Lower shafts motor: 4 kW – 3 upper driven toothed shafts – Upper shafts motor: 4 kW – Vibratory feeder length: 5000 mm – Vibratory feeder width: 620 mm – Vibratory feeder motor power: 4 kW – Feed forward / reverse – Screen: 100 x 80 mm – Hydraulic lifting of shafts and cover – Hydraulic pump motor power: 1.1 kW – Transport dimensions (L/W/H): 820 / 180 / 190 cm – Weight: ~5400 kg

Condition: like new (used), Year of construction: 2024, operating hours: 173 h, functionality: fully functional, first registration: 03/2025, NEW, fully equipped TEKNAMOTOR Skorpion 650 EB/2 wood chipper with 132 kW electric motor, 100x100 mm screen basket, 600 mm elevation for the chipper, electric control box, 8 m vibrating feeding conveyor, 4x3 m vibrating feeding table, 4.5 m collecting conveyor, 8 m discharge conveyor, spare cutting knives. FOR SALE DUE TO LACK OF USE, WITH ALL ACCESSORIES Cjdpfx Acsy Hcggj Njrb

Condition: new, Year of construction: 2024, DT500EY-650 Siemens 828 D ShopTurn (Fanuc Option) CNC turning/milling center with tailstock, driven tools and true Y-axis, ±70 mm, 35° slant bed and linear roller guides Available for viewing in the showroom Max. swing diameter: 600 mm Max. turning diameter: 320 mm Max. turning length: 650 mm Rapid traverse X/Z/Y: 20/20/12 m/min Turret: 12 stations BMT55, all 12 with live tooling Max. rotational speed: 4000 rpm, 3 kW Spindle Chuck diameter: 203 mm (optional 254 mm) Spindle nose: A2-6 (optional A2-8) Max. bar capacity: 52 mm (options for 65, 75, and 91 mm) Spindle bore diameter: 66 mm Drive power, direct drive: 22/30 kW Max. spindle speed: 4,000 rpm Tailstock diameter: 110 mm / MK3 Tailstock traverse: 850 mm Dimensions (W x D x H): 3.6 x 2.1 x 2.3 m Weight: 5.5 t Standard accessories: Coolant system Three-color warning light Work area lighting Central lubrication Programmable tailstock Set of soft jaws Tools and toolbox CE conformity Operating manual Including special accessories: Hinged belt chip conveyor Tool measuring arm Oil skimmer Bar loader interface Video shows DT500 Csdsqa Dtfopfx Ac Norb

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1300 x 650 x 510mm, Table 1200 x 540mm, Spindle speed 12,000rpm, BT40 spindle taper, Spindle Motor 17kW, FANUC Oi Control, 30 Station ATC, Low Volt light, Through Spindle Coolant Crsdpsx Dk Dljfx Ac Nob

Condition: new, Year of construction: 2026, Aluminum circular saw UK 650 HA, semi-automatic The UK 650 HA semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast easy changing of the material as well as easy adjustment of the miter angle. The UK 650 HA has an infinitely adjustable miter range left and right up to 20° (pivoting range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped takes place via two pneumatically controlled vertical and horizontal clamping cylinders. By default this machine includes a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Of Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics to lift the protective hood! equipment Double miter 20° - 90° - 20°, large support plate, powerful drive motor Two-button control for triggering the saw cut (optionally also available as a one-button control) Clear control panel Sheet or cutting feed adjustable Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be used to enlarge the cutting performance can be shifted backwards Crsdpfoidun Dsx Ac Nob large protective hood, covers the entire work area Minimum lubrication system with 2 liter reservoir Air gun to clean the machine Saw blade ø 650 mm workflow 1. Setting the cutting angle 2. Inserting the material 3. Adjusting the lifting speed 4. Bring the clamping cylinder up to 20 mm on the material 5. Clamp the material 6. By pressing the Start button, the machine is ready for use. 7. Press and hold the two SAWS keys, das Material is sawn. 8. When the cycle is complete, release both SAW buttons and the Press the STOP button 9. Open the vice and remove or push the material further It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: used, Chip conveyor, scraper conveyor with coolant tank KNOLL type 750 K-3/650 Scraper belt conveyor Serial no.: 346919 Order no.: 200725773 Year of construction 2007 Metal link width approx. 670 mm Distance between flights approx. 550 mm Length of possible chip removal 330 to approx. 3000 mm Insertion length approx. 2700 mm Insertion height approx. 400 mm Insertion width approx. 860 mm Conveyor height - ejection height 1800 mm Belt speed approx. 20 mm/sec. = 1.2 m/min. Motor power belt drive 0.55 kW Motor power coolant pump 3.0 kW Coolant pump flow rate 40 liters/min. Mains connection 400 Volt, 50 Hz - Scraper chain drive via gear motor Csdpfjphvl Tsx Ac Nsrb - Coolant tank with integrated pump - Coolant pump, BRINKMANN centrifugal pump, type TS 24/180 - Steel cover plates with drop handles for lifting, chequer plate can be used Space requirement L x W x H 6100 x 1150 x 2320 mm dead weight approx. 2000 kg good condition The conveyor is for transporting chips from a milling machine, lathe or machining center.

Condition: used, Hand - swing bending machine KRAMER type AMS 650 x 1,5 Hand swivel bending machine, press brake year of construction approx. 1985 working length 650 mm sheet thickness at 40 kg/mm2 1,5 mm upper beam opening approx. 60 mm bending beam adjustment ca- 0-25 mm bending angle 0-180 - Upper beam adjustment via hand crank - pre-screw rail for the bending beam - one-piece sharpening rail 135° Codpodzqaaefx Ac Norb space requirement L x W x H 1200 x 600 x 1100 mm weight 160 kg good condition

Condition: new, Year of construction: 2026, functionality: fully functional, Set including LUFT 700 screw compressor, N10S refrigeration air dryer. The screw compressor of the Polish brand CORMAK, the LUFT series, is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Technical parameters LUFT 700 COMPACT Compressor Engine power 5.5kW Dehumidifier Engine power 0.29kW Crodpferh E Diox Ac Nsb General parameters Capacity at 0-6 bar 680 lpm Capacity at 6 bar 650L/min Capacity at 8 bar 650 lpm Capacity at 10 bar 620 lpm Outlet G3/4" Overall dimensions 1250 x 600 x 895 mm Weight 380 kg Manufacturer: Cormak

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: 0-261-96-0637, Equipment: documentation/manual, Feeding and Discharge of Workpieces • Upper pressure belt • Variable feed rate: 8–18 m/min • Front air-cushion table • Automatic infeed fence • Prepared for connection to return system Edge Banding • PUR pre-melter, capacity 2.5 kg/h • Glue pot QA65, quantity: 2 • Support for narrow workpieces • Automatic edge feed Workpiece Finishing • Anti-adhesive and cleaning fluid system • End trimming unit • Edge milling unit with R-2 and R-1 tooling • Flat scraper, top/bottom polishing unit • Multifunctional profile scraper unit with R-2 and R-1 tooling • Corner rounding unit with R2 tool, dual-motor MF50 Documentation • Language options: English, German, Croatian • Format: Data storage medium + paper documentation General Information • Year of manufacture: 2017 • Control system: HOMAG POWERTOUCH group • CE marking: YES Crodpfxoy Eft Te Ac Neb • Availability: Ready for collection – April 2026 • Machine length: approx. 6,075 mm

Condition: ready for operation (used), Year of construction: 1997, Stock-No. 13602 Manufacturer Krauss Maffei Type of machine KM 650 – 8000 CM Year 1997 Working hours 80000 h Controlversion MC 3-F Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1704 x 1700 mm Distance between tie bars (h x v) 930 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 226 kN Injection unit: Screw diameter 130 mm Ls/D ratio 20 Injection pressure 1296 bar Stroke volume 6172 ccm Shot weight (PS) 5617 gr. Injection rate 1540 ccm/s Screw speed 138 1/min Plasticising rate max. 238 g/s Cjdpfxeub S R Hj Ac Njrb Nozzle pressure 246 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 132 kW Installed heating capacity 70 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 12,00 x 2,80 x 2,70 m Total machine weight 43000 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - 2 x core pulls on movable plate - 2 x core pulls on fix plate - 8 x hotrunner controller - Robot interface according to Euromap 67

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 0-261-20-5976, functionality: fully functional, workpiece height (max.): 60 mm, feed rate X-axis: 20 m/min, controller model: POWER CONTROL PC 20+, TECHNICAL DETAILS Panel height: 60 mm PVC-ABS edge thickness: 3 mm Crjdpfx Acjyzm E Ne Neb Solid wood edge thickness: 12 mm Feed speed: 20 m/min MACHINE DETAILS Control: POWER CONTROL PC 20+ Operational current (full load): max. 33 A Largest motor: 9.7 A Largest heating circuit: 2.7 A Fuse: 35 A Frequency: 50 Hz EQUIPMENT Upper motorized rubberized belt Manual infeed guide Anti-adhesive unit Jointing unit Gluing with EVA adhesive Edge support plate End trimming unit with automatic tilt adjustment Offset trimming and corner rounding unit with two motors Linear contour rounding unit with two motors Edge scraper unit Glue scraper unit Buffing unit External reference: MMG014

Condition: excellent (used), Year of construction: 2007, Universal milling machine Manufactured by KUNZMANN. WF 650 Year of manufacture 2007 Crsdpfjwhm S Nsx Ac Nob Technical specifications Manufacturer Kunzmann Type WF 650 Year of manufacture 2007 X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Clamping area 1000 x 600 mm Spindle mount SK 40 Spindle speeds 5 - 6500 rpm Quill stroke 60 mm Vertical head swivels +/- 90 Max. table load 400 kg Feed rates - longitudinal/transverse/vertical 0 - 4000 mm/min Rapid traverse 25 / 25 / 20 m/min Distance between table and vertical milling spindle 100 / 550 mm Distance between table and horizontal spindle 270 / 720 mm Number of tool magazine positions: 20 Tool diameter: 95 mm Tool diameter with 2 free positions: 135 mm Max. tool length: 300 mm Max. tool weight: 7 kg Spindle power: 13 kW Total power requirement: 20 kVA Machine weight: approx. 5.5 t Machine dimensions: L x W x H: 3.80 x 2.70 x 2.40 m Equipment - Heidenhain iTNC 530 control system - Operating instructions - Enclosure - Vertical head with extendable spindle sleeve - Hydraulic tool clamping - Fixed table - Electronic handheld control panel - Coolant system - Chip conveyor All information is subject to change without notice. A demonstration is available at any time in our showroom.

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,200 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 50 rpm, TECHNICAL DETAILS Travel X-axis: 2,800 mm Travel Y-axis: 1,000 mm Travel Z-axis: 1,200 mm Spindle speeds: 50 - 2,000 rpm Spindle torque: 3,000 Nm Spindle taper: SK 50 Feed rate - X / Y / Z axis: 2 - 2,000 mm/min Rapid traverse - X / Y / Z axis: 7,000 mm/min Table clamping surface: 2,000 x 800 mm Rotary table diameter: 800 mm Number of tool magazine stations: 56 Tool diameter (all stations filled): 114 mm Tool diameter (with 2 free positions): 200 mm Max. tool length: 400 mm Max. tool weight: 16 kg Tool change time: approx. 8 - 9 sec Control system: SIEMENS SINUMERIK 850 M MACHINE DETAILS Spindle motor power: 30 kW Dimensions & Weight Csdpfsyl U Thox Ac Norb Dimensions (L x W x H): approx. 6.6 x 3.15 x 2.98 m Machine weight: approx. 25.4 t EQUIPMENT Tool presetting device Various tool holders Chip conveyor Internal coolant supply Coolant system with high-pressure pump and filtration unit Electronic handwheel Fixators

Condition: used, Year of construction: 1975, Accessories / Spare parts for an engine lathe Manufacturer: TADU, Origin Spain Model: F 650 Year of manufacture: approx. 1975 • Main spindle ASA Mounting A 1-8", spindle bore 60 mm Price: €1,495.00 • Drive unit (PIV gearbox) for the headstock with stepless adjustment Manufacturer: P.I.V., Bad Homburg, Origin Germany Model: MAS 3 On the TADU F 650, an additional intermediate gear has been installed. This enables a speed range of 8 - 42 and 40 - 200 rpm. Crjdpoctgb Tefx Ac Nsb Drive motor power 5.5 kW Price: €4,650.00 plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel