Cleaning machine

MTM RoJet

Year of construction: 2014, condition: good (used), MTM, type Rojet 22198, serial no.: 30252, year of manufacture: 2014, workstation 5753, base dimensions LxWxH 6,000 x 7,000 x 5,000 mm, partial dimensions 2,000 x 2,000 x 3,000 mm, with external processing plant, control and operating unit. Njdpjwyxdbefx Abvewd

Condition: new, Year of construction: 2025, The XTON Smart Cleaner SC1000™ automatic basket washer is constructed from stainless steel AISI 304 and acid-resistant steel AISI 316. It is designed for use in various industrial and automotive applications. This washer is intended for degreasing and cleaning parts contaminated with oil or grease, without damaging the surface of the cleaned element. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner BA, which, combined with the appropriate temperature and pressure, easily removes all types of dirt. The machine operates in a closed-loop system at temperatures up to 80°C. Standard equipment includes a rotating basket with a diameter of 100 cm and a 300-liter tank, which can be optionally thermally insulated to protect the heated fluid from cooling too quickly. The Smart Cleaner SC1000™ ensures high cleaning quality, time and energy savings, as well as safe and convenient operation. It is designed for automatically removing dirt from cast iron, aluminum, and steel surfaces. The design and construction of the Smart Cleaner SC1000™ adhere to the highest quality standards ISO 9001 and environmental standards ISO 14001. EQUIPMENT: - Rotating basket with a diameter of 100 cm - Heated tank with a capacity of 300 liters - Dual liquid filtration system - Liquid level and temperature sensors - Oil separator - Adjustable feet with a height adjustment range of 100 mm - XTON Active Cleaner BA (5L starter pack) TECHNICAL PARAMETERS: - Weight: 200 kg - External dimensions - Open chamber (W x D x H): 150 x 120 x 250 cm - External dimensions - Closed chamber (W x D x H): 150 x 120 x 140 cm Nedpfx Aou R Urhobvewd - Rotating basket diameter: 100 cm - Rotating basket load capacity: 300 kg - Work time programming range: 0 - 99 min - Washing/liquid temperature: up to 80°C - Heater power: 9 kW - Tank capacity: 300 L - Tank capacity to oil separator level: 200 L - Pump capacity: 250 L/min - Spray pressure: 4.5 - 6 bar - Power supply: 3 x 400 V - Safety features: temperature sensor, emergency safety switch, limit switch - Safety rating: IP 54 - Declaration of conformity: CE

Condition: good (used), Plant: REWA Chamber Filter Press used Type: 470-15-25K-HP Design: side rail guided Filter plate format: 470x470 mm Number of plates: 15 Filter plates: PP Filter cloths: optionally available in coordination with the medium Press capacity: approx. 57 dm3 Filter pressure: approx. 15 bar Material of parts in contact with the product: Flange, feed-throughs stainless steel, PP or rubberized Material of parts not in contact with the product: Stainless steel Purchase or hire: Inspections of the systems by arrangement at our factory. Other: We can supply you with used equipment ready for operation or refurbished according to your wishes and requirements. Would you like to rent or buy this system? Please contact us, we are at your disposal. Nedpfeqakbrjx Abvjwd

Year of construction: 1999, condition: excellent (used), 1999 Start type: to be agreed Cost of delivery: Customer cover Conditions of delivery: OWN RECEIPT Category: Grinding machines in Poland Nwedpfsd Nmdkox Abvjd Subcategory: Through grinding machines Subcategory 2: Grinding machines, brushing machines Description Manufacturer VANGROENWEGHE Model / type of TYPE M-300-COMBI / CE machine

Condition: new, saw blade diameter 350 mm Nwodpjfg Rlcjfx Abvod capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness different cutting programs, each with a different cutting length and number of pieces program.

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. Nsdpjpugwiofx Abvjwd The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: used, HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 Nsdpfxjqpdkcs Abvewd - Range of working diameter: 6 - 18 mm - Capacity: about 7,500 - 15,000 dowels/hour

Year of construction: 2026, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 Nsdpsfy T H Ijfx Abvewd 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, ⭐⭐⭐⭐⭐ (5.0) 58 ratings ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✈️ shipping : 30-days delivery ✈️ ✅✅✅Energy class A+++✅✅✅ EXCL. VAT & SHIPPING* ►►Buy It Now◄◄ Nodpfx Absghf R Ujvewd ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰►►► ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ ⭐ Powder oven with gas or diesel heating - BOXLINE 15-3025 ✔️Internal dimensions : 1500*3000*2100 ✔️External dimensions: 1780*4000*2500 ✔️ Volume: 9 m³ ✔️ Heating capacity: 90,300 Kcal/h ✔️ Circulating air flow rate (fan) : 6,800 [M³/H] ✔️ Power of the circulating air fan: 2.2 [KW/H] ✔️ Digital heat control Temperature continuously adjustable up to 220°C ✔️ Sandwich panels Inside: 1mm galvanized steel, Outside: 1mm powder-coated steel ✔️ Adjustable air outlet openings and air circulation channels for homogeneous air distribution ✔️ Adjustable curing temperature, curing time and exhaust fan function ✔️ A beep will sound at the end of the curing time ✔️ Insulated door with special locking systems ✔️ Insulation: 140mm Rockwool. Walls: 140mm (50mm rockwool and 100mm fiberglass) ✔️ Type of heating: Indirect heating ✳️Functional principle✳️ This oven is intended for heating powder coated parts. The paint polymerizes at a temperature of around 200ºC (depending on the type of paint used) and forms a film on the surface of the metal. The temperature control in the oven is carried out by the control unit, which receives a signal from the temperature sensor in the oven. ✳️Oven Body✳️ The body of the polymerization furnace consists of heat-insulating panels that are inserted upright into each other and glued together with a heat-resistant sealant. Conveyor distances to the oven door channels can be left if desired. Optionally, it can be made with pivoting double doors. ✳️Heat exchanger✳️ The heat exchanger is installed in the side part of the polymerization furnace body. The internal structure and materials of the heat exchanger are designed in such a way that the temperature in the furnace can be increased to 230 ° C, and the temperature difference at various points is the allowable ones Heat exchanger manufactured from 3 mm. AISI310 Quality STAINLESS STEEL ✳️Circulation fan✳️ Air circulation in the oven is carried out by four circulation fans with insulated chassis. Blade air propellers are often used in circulation fans. ✳️Digital fully electronic temperature controller✳️ ✳️Exhaust fan✳️ It is used to suck in and blow out the gases produced during the polymerisation of the powder in the furnace. If necessary, the exhaust fan can work continuously after a certain period of time or turn on automatically from time to time. ⭐Follow us for new campaigns⭐ ☀️ 2 YEAR WARRANTY ☀️

Condition: like new (used), Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input frequency: 50 Hz, temperature: 60 °C, load capacity: 250 kg, SUMMA DC3/OSK rotating basket, rotating drum cleaning equipment, Carousel degreasing machine with dryer. Nedpjwty H Defx Abvswd The chamber rotary machine of the Czech manufacturer operates on the principle of pressure spraying. The degreasing machine offers three surface cleaning combinations. The machine is suitable for surface degreasing of a wide range of materials. Manufacturer: SUMMA DC3/OSK Year of manufacture: 2011 Max. workpiece size: 770x500mm Max. workpiece weight: 250kg Electr. Power: 23kw Bath temperature: Max. 60°C Air temperature: Max. 120°C Bath (rinsing) heating: 12/6kw Drying air heating: 13.5kw Aerosol pressure: 0.28Mpa Pump performance: 70 liters/minute Machine weight: 520kg Machine dimensions: 1800x1800mm Height: 1500mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.