Mubea KLH 500

Mubea KLH 500

Condition: used, functionality: fully functional, Year of construction: 1990, machine/vehicle number: 0166890274834, control type: manual, degree of automation: manual, actuation type: hydraulic, punching force: 50 t, punching diameter: 100 mm, stroke length: 60 mm, throat depth: 650 mm, sheet thickness steel (max.): 15 mm, overall weight: 1,700 kg, total length: 1,500 mm, total width: 650 mm, total height: 1,700 mm, power: 7.5 kW (10.20 HP), input voltage: 220 V, input current: 26 A, input frequency: 50 Hz, type of input current: three-phase, year of last overhaul: 2023, Equipment: foot remote control, Muhr & Bender (Mubea) Punching Machine KLH 500/610 – incl. punching tools Used punching machine from Muhr & Bender (Mubea), model KLH 500/610, Made in West Germany. Condition: The machine has been professionally inspected by a machinery technician and is in very good, fully operational condition. All functions have been tested. Technical data (all information without guarantee): – Punching force: approx. 500 kN / 50 t – Max. punching diameter: up to approx. Ø 100 mm (e.g. Ø 30 mm in 15 mm steel) – Max. sheet thickness (steel): approx. 15 mm – Throat depth: approx. 610 mm – Stroke: approx. 60 mm – Drive: hydraulic, manual/conventional control with foot switch – Connection: 220/380 V, 3~, 50 Hz – Power: approx. 7.5 kW – Rated current: 26.3 A / 15.2 A Scope of delivery: Lhsdpox Dtp Rjfx Ah Uer – Muhr & Bender (Mubea) KLH 500/610 punching machine – including corresponding punching tools (scope as per photos) Important notes: – The stated price applies to self-collection only. – Dismantling, loading, and transport are the exclusive responsibility and at the expense of the buyer. – Sale is from used stock, without guarantee or warranty. Inspection possible by appointment. I am happy to answer further questions.

Condition: new, Year of construction: 2025, Bending machine ZB 70/2 M - with foot pedal - with standard roller set - two driven shafts - mecanical adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - adjusting way: 120 mm - weight: 400 kg - dimensions: 900x600x1100 mm Lhjdet Hwfnepfx Ah Uer

Condition: ready for operation (used), Punching force: 500kN, throat depth: 610mm, stroke: 60mm, max. hole diameter in steel thicknesses 15mm/9mm/4.5mm: 30mm/50mm/100mm, max. material thickness: 15mm. Machine dimensions X/Y/Z: approx. 1100mm/1550mm/1750mm, weight: approx. 1650kg. An on-site inspection is possible. Lhsdpfxjw U T Uve Ah Ujr

Condition: used, Punching force: 500 kN Throat: 610 mm For example, punch a 30 mm hole in 15 mm steel Quick change device Stroke triggering via foot switch Lhjdewlpryjpfx Ah Uor Assortment of tools is included in the price

Condition: good (used), Year of construction: 2020, operating hours: 206 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 88 mm, Waterjet Cutting Machine Multicam V-204-W with High-Pressure Pump KMT Streamline SL-VI 50 STD and Abrasive Feeder KMT Abraline V Year of manufacture: 2020 Operating hours: Only 206h !!! (read directly from the high-pressure pump) Complete documentation available. The cutting tank is fitted with grating supports. It can also be equipped with the original plastic supports (approximate cost: €3,000). (Y) Axis ... 1524 mm (X) Axis ... 3048 mm (Z) Axis ... 88.9 mm Position accuracy: +/-0.001″ Repeatability: +/-0.002″ Rapid traverse (max): 1000 IPM Cutting speed (max): 800 IPM EQUIPPED WITH: Lsdpfsxg Nnnsx Ah Ushr - KMT Streamline SL-VI 50 STD, 50 Hp (37 kW) – 500 - 3,800 bar - Dual side stepper motors - Multicam hand-held graphic interface - KMT Abraline V – Highly accurate abrasive feeding/hopper system

Condition: used, Punching force: 500 kN Ljdjv Rfl Ispfx Ah Uehr Throat: 610 mm For example, punch a 30 mm hole in 15 mm steel Stroke triggering via foot switch Assortment of tools is included in the price

Condition: used, Punching force: 400 kN (e.g. punches 20 m in 15 mm steel) Cuts 150 x 10 mm on the flat steel shears Foot switch for triggering the stroke quick-change device Assortment of tools is included in the price Lodpfelf Trkox Ah Ushr

Condition: new, Ostas hydraulic profile ring bending machine OPK 45 2 driven rollers Digital display Incl. standard steel roller set Lhjdpfx Asvmzfioh Ujr Description Hydraulic / motorized ring bending machine Can be used horizontally and vertically with 2 driven rollers 2 rollers motor-driven Adjustment of the upper roller hydraulic Rollers are hardened Left/right rotation using foot pedal Mounting: shaft 50mm Roller diameter at top 158 mm Roller diameter at bottom 158 mm Speed 4.5 m/min Motor power: 0.75 +1.5 kW Electrical connection 400 V According to CE standard Weight 420 kg