Folding Machine

Nagel Foldnak compakt booklet maker with trimmer

Condition: like new (used), Offer consists of: A patented folding and stapling system ensures precise staple positioning • Processing capacity: up to 25 sheets at 80 gsm paper weight • Supported paper formats: • Minimum: 105 × 210 mm • Maximum: 325 × 450 mm • Standard processing with flat or loop staples possible • Up to four stapling heads can be used simultaneously at four different positions • Equipped with both lateral and vertical jogging functions • Conveyor belt with roller guide ensures consistent, trouble-free paper transport • Adjustable clinchers provide neatly aligned, flat staples • Integrated sensors detect malfunctions early and reduce waste • Before front trimming, the booklet is pressed to achieve a clear and sharp fold • The front trim is made precisely parallel to the fold line of the booklet • Built-in, adjustable shingle delivery for orderly stacking of finished products Rsdpfxjyl Syxo Am Tocd

Condition: excellent (used), Now in stock at Glendale we have this GMP QTopic 380 Laminator with Foiling/Sleeking rewinder. Having been within a small digital implant, this laminator has had little use. The laminator is in perfect working order and includes the air compressor and foiling unit. Raising ordinary print work to 'extra-ordinary'.GMP QTopic 380 has been developed to meet specific print finishing requirements and built to exacting technical standards – with fully controllable pressure and heat processes, devised to deliver optimum results with today's digital print output. The GMP QTopic 380 offers pneumatic pressure which is required to get a great finishing when laminating and/or foiling is required. The pneumatic pressure is supplied by the integrated silent air compressor housed in the Qtopic 380 stand. This semi-automatic system is hand feed with automatic sheet separation. Capable of working at speeds up to 10 metres per minute the QTopic 380 can laminator over 1300 SRA3 per hour. Turnaround times and waste are further minimised with the unique 'burst separation' system. The laminating film is micro-perforated on the edge by the robust marking device and then separated by the pneumatic burst roller. This easily separates the laminated sheets prior to the actual edge of the media, leaving clean and square datum edges from which to measure, cut, fold or guillotine. Faultless lamination. Class-leading lamination for the commercial and digital printer. Using state-of-the-art technology, combined with integrated pneumatic pressure, the QTopic 380 delivers superior bonding and faster production times – compared to standard systems. In addition, the fully adjustable heat and pressure combinations enable a wider range of laminates to be used with litho or digital printed media. Stunning foiling. For today's printers who demand stunning results with that extra ‘wow’ factor – the GMP QTopic 380 delivers more than just class-leading lamination. Metallic, coloured, patterned or holographic style foils can be added to digitally printed materials in either spot or flood treatments. This decorative effect traditionally would involve costly custom die production to create these effects. However, the QTopic can deliver instant and affordable results - and with upgraded pneumatic pressure, an even wider choice of media is now suitable for great results! Specifications Manufacturer GMP Model QTopic 380 Year 2021 Condition Refurbished Stock Number 114941 Laminating speed 1.5m to 10m/min Paper weight 110-400gsm Warm up time 5 minutes Laminating temperature up to 150° Temperature control Touch screen Speed control Touch screen Roller pressure Pneumatic Rcodpfx Aewi T Tvem Ted Film core (mm / inches) 77mm 3" Electrical requirements 220/240v 50/60Hz Machine weight 187kg Dimensions L2010mm x W710mm x H1475 - all when in use

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, cutting width (max.): 1,150 mm, Equipment: safety light barrier, Polar 115 EM paper cutting machine, manufactured in 1982, with programmable control, air table, and light barriers. In good condition and available immediately. Rcodszivbmepfx Am Ted If you are interested, we would be happy to provide you with information about other machines in our inventory. You are welcome to inspect the machine at our facility, by prior appointment.

Condition: used, Year of construction: 1986, impressions 24 Mio. Rsdewplrqjpfx Am Tecd max. printing speed sheets 8000 /h max. paper size 36 x 52 cm dampening system Crestline

Condition: used, Year of construction: 2006, The Heidelberg Stahlfolder Ti 40/4-SAK is a compact and efficient folding machine designed for small to medium-sized print shops. It has 4 pockets and an SAK stream delivery system Format: 400 x 650 mm Equipment: Feeder Feeder Mode: Flat pile feeder Type: FI-40 Control Unit: DCT 500 Rcsdowcqxvjpfx Am Tjd Folding Units 1st unit Type: Ti-40 Year: 2004 Pockets: 4 Pocket Type: Combi folding plates Pocket Configuration: manual Rollers Configuration: manual Roller condition: used condition Noise Protection Hood Serial number: F-00226 Delivery Delivery mode: Shingle delivery Technical Details Sheet size max: 400 x 650 mm Sheet size min: 80 x 100 mm Max. mechanical speed: 180 m/min.

Condition: good (used), Schmedt – PräRund – PräDeck – PräKant, in good condition, immediately available. Rcjdpfxeh Dy Ivs Am Tod

Condition: excellent (used), Year of construction: 2019, Ref:11075 . 2022 Horizon Stitchliner Mark III Only 8.35 million books made! Latest generation, fully automatic setting Sheet Collating and Saddle Stitched Booklet System. Features: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections No need to pre-fold Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Comprising: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections No need to pre-fold Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Comprising: 12 station (1 x VAC 600Ha + 1 x VAC 600Hm) 6 station tower suction collators with touch-screen control, double- and miss-sheet control. ST-40 stacker to Accumulator/Folder ACF-40 with double gate-fold to; SPF-40 Saddle stitcher with 4 x Hohner 43/6S stitching heads to; SPF-40 Saddle stitcher with 2 x Hohner 43/6S stitching heads to; HTS-40 Three knife trimmer PK-30 Kicker Shingle delivery belt Rcedpfxoywlifo Am Tod

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, STC-Ref: G-071-2423 Polar 78-ES, Year: 1998 format: 0x780 mm equipped with: - safety light beam - photo-cell - rear table guard - datastore for programmes - airtable at left side Rodpfx Aozdu N Eem Tecd - airtable at left side - airtable - monitor

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, Fully automatic high-performance die cutter Renz Kugler 341-2R for calendars and ring binders 3 tools Conveniently operated by a single person, Kugler punching machines are suitable for use in even the tightest spaces. Equipped with a non-stop feeder and gentle top-fed material intake. Capable of trouble-free processing of mixed materials (e.g., cardboard and plastic). Precise alignment before the punching process ensures maximum accuracy. Ideal for perforating ring binder inserts, cardboard and plastic calendar/index sheets, paper for wire-bound products, and much more. Tool changes only require a few simple steps. After punching, a turning wheel maintains the correct sequence for printed and numbered products, transporting them to the delivery station. Precise and simple register adjustment. Performance features Rcsdjxduclopfx Am Tjd - Minimal maintenance required - Highly efficient - User-friendly operation - Fastest changeover between formats Technical data - Working width: 500 mm - Maximum punched page format: 500 mm - Maximum unpunched page format: 500 mm - Maximum punching thickness: 3 mm per layer - Punching speed: 110 cycles/min - Paper feeding: automatic, non-stop paternoster feeder - Paper delivery: automatic, box delivery with jogger - Paper grammage: min. 60 g/m², max. 2 mm (subject to gram/quality restrictions) - Register punching: yes (not included) - Interchangeable tooling - Tool changes require only a few manual operations - Quick format change, manual setting wheels - Adjustable edge distance - Punching unit can be selectively deactivated - Space required: 3.30 x 1.50 m - Net weight: 1,580 kg

Condition: used, machine/vehicle number: 13071420, Business card cutter, Uchida Yoko, machine number 13071420, the machine is in good condition and available immediately. Rjdpfxjxvxl Ue Am Tocd