Pallet production machine

PNEUMATICO AT-3000

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: 3283, Häwa Round Timber Milling Machine Type 249-193-00 Year of manufacture: 1979, Serial No. 3283, Log diameter: 0.30 - 1.30 m Log length: 2.20 - 6.50 m Connected load: 55 kW Round timber feeding station, log carriage, Milling head debarking, scraper chain conveyor with discharge Iajdpfx Aexvq Hkopnot Log sorting system left/right Control panel and electrical cabinets

Condition: used, Year of construction: 1997, - edge banding unit Iodpfxsd Inkte Apnjat - Cross-cutting unit - Milling unit - Fine trimming unit - scraper - buffing unit

Year of construction: 2004, condition: used, Tank & Environmental Protection Wozniack Dear Sir or Madam, we offer a 25.000 liters double-walled storage tank diesel tank ===== Nominal capacity : 25 cbm piece : 1 used : but generally overhauled, that means the tank is cleaned, sandblasted, primed and painted color equipment : lacquer RAL ; . However, you can always bring your own color requirements. Material : steel in steel, material S235JRG2 Documents : Manufacturer certificate/test certificate according to DIN 6616 D/2 and nameplate Piece : 1 dipstick Piece : 1 venting spigot Piece : 1 filling nozzle Piece : 1 new limit switch Piece : 1 new leak detector with filled up leak liquid Piece : 1 ladder Iedpfx Asc Nkr Nopneat Piece : 1 suction line Shape : cylindrical storage tank with feet/console tank dimensions : length -approx. 8390 mm diameter -approx. 2.000 mm weight -approx. 4.500 kg Storage : above ground Compact diesel dispenser Piusi 70 Ltr min . Pump 230 Volt max 55 Ltr/min. on request also in 70Liter min . Of course you can also design your tank system! We will gladly implement your color and equipment wishes according to our possibilities. All our plants are extensively controlled and checked in our company by selected employees. We also offer an inexpensive delivery on request. The inspection of our plants is possible at any time. Further tank plants for above ground as well as underground storage are available in all sizes and are for sale on our premises. We also buy existing tank facilities at any time. A trade-in of existing plants is possible. With kind regards from Warstein Tank and environmental protection Wozniack Enkerbruch 2 59581 Warstein

Year of construction: 2001, condition: ready for operation (used), A paving stone production line Omag, which has been continuously optimized and upgraded to the latest technical standards, is available. Overhauls: 1) Conversion for an additional hydraulic unit for additional load in 2020. 2) Conversion to servo-vibration with Siemens S7 control in 2016. 3) Conversion to digital path measurement of mould and ram in 2017. 4) New core filling carriages in 2017. Plant components: 1) Board destacker and board stacker including roller conveyor. 2) Board feeder (advance) and board conveyor (scraper) to the lifting frame. 3) Board turner. 4) Horizontal and vertical bundling units Ridder & Signode, years of manufacture: 1994 and 1983. 5) Trafo lifting platform including motors and without control, year of manufacture: 1983. 6) Doppler including hydraulic unit, year of manufacture: 2004. 7) Stone packer Omag K1400 including hydraulic unit, year of manufacture: 1997. The line has no base boards. 8) Stone finisher Omag S22 140-90, year of manufacture: 2001. Documentation available. An on-site inspection is possible. Iedpsw R Uzijfx Apnoat

Year of construction: 2015, condition: used, workpiece length 1.500 - 6.000 mm work piece width 50 - 200 mm Iodjyz Df Topfx Apnsat workpiece height 20 - 100 mm Max. Layer weight 450 kg Max. Stack size 6 x 1,2 x 1,35 m Paternoster stacking system, destacking or outfeed mechanization Sicko type X-Stacker for automatic stacking of workpieces after planing systems. The system is designed for a continuous material flow and enables the formation of layers and bundles in several fixed lengths. Ideal for the efficient stacking of wooden workpieces. The system consists of an infeed roller conveyor after the planing machine with a length of 10.3 m, the stacking unit and a roller conveyor (buffer section) after stacking with a length of 7 m. Technical details on request. Also available is the complete planing line, the planing machine or the Weinig High-Mech loading magazine.

Condition: ready for operation (used), Slab recovery line with below machines: One 2-blade board edger One single blade horisontal resaw Conveyors system between the machines included. Iajdegwqk Sjpfx Apnst

Condition: used, functionality: fully functional, power: 16.92 kW (23.00 HP), fuel type: gasoline, color: yellow, empty load weight: 830 kg, maximum load weight: 400 kg, lifting height: 2,150 mm, digging bucket width: 1,150 mm, Year of construction: 2023, Equipment: pallet forks, standard shovel, We are offering this used Briggs+Stratton HA430 mini excavator, year of manufacture 2023. Manufacturer: Briggs+Stratton Model: HA430 Year of manufacture: 2023 Condition: used Category ID: 105 Type ID: 20 Machine type: mini excavator Agile mini excavator equipped with a robust pallet fork and bucket. Can be transported in a small van. Rear seat Mechanical quick coupler Connection: 3-circuit control system Engine power: 23 HP Engine: Briggs+Stratton, petrol Unladen weight: 830 kg Max. payload: 400 kg Lift height: 2,150 mm Width: 1,150 mm Height: 1,280 mm Length: 2,010 mm Length with bucket: 2,530 mm Length with forks: 2,910 mm Versatile and mobile usability, e.g. as a yard loader, in landscaping, demolition, nurseries, forestry, and winter services. Low hours, approx. 30. The excavator is practically as new but is no longer needed. Original price was EUR 11,000. Isdjytd Uwopfx Apnoat If you have any questions or need more information, please feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2006, I sell the automatic pneumatic end cutting saw Weinig Grecon Dimter Opticut 200 Elite Year 2006 Motor power 7,5kW Input table automatic feeding 4,10m (throughfeed system) Outut table automatic 6 pcs. kickers on right outfeed table Optimising with mistakes deffect reading and automatic cutting sequence modes. Iajdpfx Aextxi Iopnjt Available immediately. CE version. Documentation included.

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 400 mm, saw band length: 5,550 mm, saw band width: 80 mm, table length: 800 mm, table width: 1,060 mm, working height: 400 mm, - Italian manufacture - Lamella band saw - Unpainted - Very good condition - Used saw Band Saw: - Wheel diameter: 800 mm - Max. blade width: 80 mm - Max. cutting height: 400 mm - Main drive motor: 11 kW - Feed speed range: 2–40 m/min - Feed system with pneumatic pressure to the guide - Metal slip-in feed roller - Blade length: 5550 mm - Throat (blade-to-frame distance): 780 mm - Screw-type blade tensioning - Table size: 1060x800 mm - Tilting worktable: up to 15° - Extraction port diameter: 120 mm - Blade lubrication system - Foot brake - Cast wheels - Star/Delta starting - Power supply: 380V Ijdpfew H Rq Hjx Apneat - Dimensions (LxWxH): 1600x1100x2400 mm - Weight: 860 kg Feed Unit: - Metal, toothed, drive roller - Five feed speeds, selectable by belt adjustment - Roller height: 30 mm - Feed motor: 0.75 kW - Pressure system

Condition: new, Fully automated block cutting machine for pallet legs. Maximum length of raw material 6m. The machine suits all type of pallet production. OKKR-2006 can operate as a separate standing machine or as part of a production line. How does it work? The machine is fed block material on the chain infeed conveyor. The material is fed automatically and the machine cuts the blocks into the preinstalled length. OKKR-2006 can be programmed to cut several different lengths of blocks from the original piece of raw material. Maximum length of the raw material is 6m. Asssembled block size: Min / max length: 600 mm - 6000 mm Width min / max: 75 mm - 150 mm Thickness min / max: 75 mm - 100 mm Specifications Operators | 0 Length | 7,5 m Width | 2,5 m Height | 1,8 m Power | 7 kW, 3x400 V+N Pneumatic system | 7 bar compressed dried air: 450 L/min Should be filled and controlled | Lubrication points Iedpfx Aswdutmjpneat Machine capacity | 36 blocks/min Standard equipment | 1 electric motor for saw blade 1 electric motor for material infeed 1 electric motor for chain infeed Mychrome has various additional machine modules that can be easily docked onto existing machines to achieve a higher level of automation. The ability to change the design and size of the pallets is still available with these additional machine modules.