Surface Grinding Machine

PROTH PSGS 3060 NEW S+ Touch

Condition: new, Year of construction: 2025, 0600 mm 300 mm Nodpfx Ajwp Tpdjhzoct 382 mm 700x340 mm 355x38x127 mm 1500 U/min

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. Nsdpfjqt Dmyjx Ahzsct We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, Complete set including hand and double-foot remote control Digital speed display Hydraulic height adjustment Dimensions: Tilt height min: 800mm Tilt height max: 1900mm Nodpfxol Dq U Uj Ahzoct Horizontal height min: 1050mm Horizontal height max: 2000mm Clamping disc diameter 1500mm Length 2900mm, width 1400mm Weight 3200 kg Speed from 0.01 to approx. 0.9 rpm. CE certified

Condition: used, Technical details: swing diameter: 200 mm centre distance: 450 mm cross travel: 245 mm longitudinal feed: 830 mm table speed: 0,05-4,5 stufenlos m/min revolution per minute: Schleifspindel 1780, 2050 U/min revolution per minute: Werkstückspindel 50-500 U/min dimensions of grinding wheel: 350x32x127 mm Table dimensions: 2200x280 mm table swivelling to both sides: 9°vor+10°zurück Grad total power requirement: 6,0 kW weight of the machine ca.: 2,2 t dimensions of machine: 2,2x2,05x1,6 m Universal Center Grinding Machine without internal grinding device! - for precision grinding of outer, inner such as cone surfaces - feed of grinding headstock via hydr. or manual possible - table feed hydraulic stepless - grinding spindle swivelable with 60 degrees - workpiece headstock 90 degress swiveable with tapper MK4 Ncodpeu Ng Dgsfx Ahzet - tailstock tapper MK 3 equipment: - dressing device/extruder - coolant tank incl. pump and supply i.D. *

Condition: used, Year of construction: 1963, Technical details: max. wheel diameter: 900 mm max. module: 10 Nodpfsvkpu Hjx Ahzect weight of the machine ca.: 8200 kos. hob dia. - max.: 190 mm cutter length max.: 320 mm milling spindle speeds (infinitely variable): 13-80 U/min workpiece length - max.: 750 mm max. workpiece diameter: 150 mm Counter holder milling mandrel is missing *

Condition: good (used), max. wheel diameter 1600 mm gear width 250 mm max. module 30 min. module 8 range of tooth size 58 mm tooth width 250 mm weight of the machine ca. 42,3 t dimensions of the machine ca. 4,45 x 6,00 m - Cone spacing in mm. for spiral angle 30° minimum: 150 maximum: 800 Ncjdpfx Aheu Dbucjzjt - Taper angle, in degrees minimum: 5 maximum: 85 - Tooth angle minimum: 0° maximum: 45° - Number of teeth to be cut minimum: 10 maximum: 150 The machine is complete, fully functional and in good condition. Equipment / accessories: - complete set of change wheels - 4 pcs. cutter heads - various milling cutters - Operating instructions in English

Condition: used, Year of construction: 1979, Cylindrical Grinding Machine SKF with Internal Grinding Unit Hydraulic Nedpfx Ahsgt Ea Rszoct

Condition: excellent (used), Year of construction: 2014, Manufacturer: Spinner Model: TC-400 Year of manufacture: 2014 Control: Fanuc 32iTB Max. bar capacity: Ø 52 mm Equipment: Short bar loader Spinner Servo-Load 80-1500V2 with support stand Njdowwucujpfx Ahzoct Control: Fanuc 32iTB with color LCD display/control panel 1 Drive motors for X/Z axes and spindle manufactured by GE Fanuc with digital AC technology, traversing paths X = 200 mm, Z = 515 mm. Main spindle up to 5,000 rpm / 52 mm; power 18 kW; torque 113 Nm (S6=40%). Main spindle as integrated motor spindle with water cooling, spindle nose A6. C-axis for spindle including software option 'Transmit' for face machining and 'cylindrical interpolation' for peripheral machining. Hydraulic hollow chuck cylinder. 12-position indexing turret for tool holders in accordance with DIN 69880/30 mm, 12 driven tool stations with turret for milling and drilling operations. Tailstock for TC400, MK4. Chip conveyor TC400 with enlarged L-shaped coolant tank, approx. 150 liters with centrifugal pump, 50 l/min, 3.3 bar. Parts catcher, tool setter arm, high-pressure pump, electrostatic air cleaner.

Condition: good (used), Year of construction: 2010, Machine have live tools option and Y axis. Cutting tools not come. Nedpjxpw Nlefx Ahzect Parts shown by hand not come. Technical details shown on pictures.

Condition: as good as new (ex-display), Year of construction: 2025, Offered is a conventional universal cylindrical grinding machine EMAG Weiss Eco 200. The super compact machine is targeted to users who do not require a CNC control unit, but still set the highest requirements for machining quality. Ncjdpfxjtmqcwe Ahzjt The machine is easy to operate and access, which allows for fast machine tooling. TECHNICAL DATA Workpiece diameter: max. 200 mm Workpiece lenght: max. 400 mm Center height: 100 mm Workpiece weight: 30 kg Workpiece headstock - socket: MK4 Tailstock - socket: MK3 Grinding wheel diameter: max. max. 350 mm Price, delivery time and equipment of the machine according to agreement.