Trolley

Rehnen Varioflex

Condition: used, The convenient Varioflex shelving trolley is designed for flexible and gentle unloading of painted workpieces. In addition, they enable its 4 swivel castors also facilitate the transport of the Workpieces. Its sturdy tubular frame construction can be Adjustable from 200 to 2000 mm. With 17 inner and 17 outer support tubes each per side, the trolley can carry loads of up to 400 kg at to support an evenly distributed load. The plug-in inner and outer support tubes allow can be removed if required and can be fitted at the rear be reused. When not in use, the shelving trolley can be stored to save space Put together. Optional accessories – Plastic-coated support tubes – Additional rakes Technical specifications: Length: 200–2,000 mm Depth: 870–1,180 mm Height: 1855 mm Bdedpfx Ajzk Npaem Tof Support tube length: 650 mm – extended to: 1,150 mm Clearance between pipes: 70 mm Load capacity: 400 kg Availability: at short notice Storage location: Röllbach

Condition: new, Year of construction: 2024, Working width: 600 mm Bsdpfxsug Ty Hj Am Todf Working height: 150 mm Units: 4 brush units separately adjustable 1st unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with a 3 kW motor 2nd unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with one 3 kW motor 3rd unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive 4th unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive Height adjustment: electric Height display: digital Control: touchscreen Feed speed: 4 - 12 m/min Motor power feed: 0.37 kW Machine length: Machine width: Weight:

Year of construction: 2022, condition: new, Shelves: 17 Clear distance between tubes: 60 mm Tube length for support: 650 mm Length: 200 - 2000 mm Steering rollers: Polyamide, 4 pieces Depth: 870 - 1180 mm Height: 198 mm Bdedpfx Aed Ry I Njm Tjf Load capacity: 400 kg

Condition: new, - NEW -- stable tubular frame construction- Extendable from 200 to 2000 mm andlockable to any desired width- 17 shelves on both sides possible- 4 polyamide castors, capacity 400 kg- Supporting tubes galvanizedTechnical specifications:Support pipe length: 650 mm- extended to: 1150 mmLight intermediate dimension of the tubes: 60 mmLength: 200 - 2000 mmDepth: 870 - 1180 mmHeight: 1855 mmItem No. 13-03000001 Bdjdpfx Asvwfvmom Tjf

Condition: new, Year of construction: 2026, For professional and precise glue supply in dowel holes and back side grooves. Short introduction: Bedpfx Amodxz Tpj Tedf • Always the same and right glue amount • No afterwards cleaning of the workpieces of too much glue is necessary • Easiest and minimal cleaning (1x week) of the gluing system (through cleaning program) • Glue cost savings • Ergonomic and light glue gun compared to squeezy glue bottles • Faster and more precise working compared to squeezy glue bottles

Condition: new, Year of construction: 2024, Magnetic separator for chip transport lines Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Pipe diameter: 180 mm Location: In stock at warehouse 54634 Bitburg - immediately available - Bdsdecqvhwepfx Am Tef

Condition: used, HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 - Range of working diameter: 6 - 18 mm Bdodpeqpdkcjfx Am Tsf - Capacity: about 7,500 - 15,000 dowels/hour

Year of construction: 2004, condition: ready for operation (used), Max. working width: 1000mm, feed rate: 5-20m/min, height: 2200mm, length: 4000mm, weight: 3.3t, with documentation, was maintained regularly. Bodpfx Aji E Trpem Todf

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine Bodpfeh Nvyzox Am Todf -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg

Year of construction: 2004, condition: excellent (used), Four-side planer -max. planing width 23cm Bdsdpfx Amshlp D No Tjf -max planing height 16cm -2 pulling rollers in the table -chromed table - smooth regulation of the feed speed -2 pulleys from the top in front of the lower head, additionally a roller apparatus for short elements - 4 spindles: lower 5.5kW, right 5.5kW, left 5.5kW, upper 7.5kw The machine is in very good condition, little used, with spiral heads on the bottom right and left, with a Terssa knife head on the top.