Table boring mill
REM CPAF 132

Year of construction

2016

Condition

Used

Location

Bacău

Machine data

Machine type:: Table boring mill

Manufacturer:: REM

Model:: CPAF 132

Year of construction:: 2016

Condition:: excellent (used)

Price & Location

Rental:: is possible

Location:: Calea Republicii 199, 600304 Bacau, România

Call

Technical details

Travel distance X-axis:: 2,500 mm

Travel distance Y-axis:: 1,600 mm

Travel distance Z-axis:: 800 mm

Table load:: 25,000 kg

Spindle diameter:: 132 mm

Spindle speed (max.):: 2,500 rpm

Total height:: 50 mm

Total length:: 80 mm

Total width:: 50 mm

Table length:: 2,000 mm

Table width:: 1,750 mm

Feed length W-axis:: 10,000 mm

Feed rate X-axis:: 10 m/min

Feed rate Y-axis:: 10 m/min

Feed rate Z-axis:: 10 m/min

Rotational speed (max.):: 2 rpm

Travel distance W-axis:: 800 mm

Rapid traverse Y-axis:: 10 m/min

Rapid traverse Z-axis:: 10 m/min

Workpiece weight (max.):: 25,000 kg

Power:: 37 kW (50.31 HP)

Details about the offer

Listing ID:: A15290362

Update:: 11.08.2025

Description

Machine full under power .

Need new X axis telescopic covers
Mfg by REM 2016 revised 2022
Control -- Fanuc 31 I A
TECHNICAL FEATURES
Milling and Boring Head
Boring spindle diameter 132 mm
Boring spindle tapered bore ISO 50
Speed ranges No 2
Spindle speed 0+2500RPM
Tool clamping automatic
Main motor power (regime S1) 37 KW
(spindle motor)
Rotary Table
Dimensions 1750x2000 mm
Table indexing 360.000x0.001
Indexing accuracy 6 seconds
Maximum hydrostatic 25.000 kg
Axes Travel
X cross slide 2500 mm
Z spindle 800 mm
Y headstock 1600 mm
W column back forth 1100 mm
Feeds
Feed axes selection automatic
Work feed range on X, Y, Z 2 ÷ 10.000 mm/min
Work feed range on W 2 ÷ 6.000 mm/min
Work feed range on B 0.025-3 rpm
Lead screws type on X, Y, Z ,W ball-screw
Overall Dimensions
length 7600 mm
width 6000 mm
height 5100 mm
Weight (approx.) 44 tons
Kledpfx Agorwx U Isnet
Accessories - standard
• Foundation leveling blocks
• Technical documentation – operator, maintenance and programming

Accessories - optional
• Angle plates ( vincle)

Seller

Registered since: 2016

10 listings online

Call

Send inquiry

Telephone & Fax

+40 334 4... show

+40 234 5... show

Fax:

These listings may also fit your interest.

Listing

CNC turning and milling center WFL M65 - 4500

Uttendorf

1,389 km

CNC turning and milling center
WFLM65 - 4500

Call

Condition: excellent (used), Year of construction: 2000, Nominal diameter: 4,500 mm Swing diameter over bed: 820 mm Swing diameter over steady rest carriage: 650 mm Spindle bore: 115 mm Main spindle drive power: 40 kW Milling spindle drive power: 25 kW Milling spindle tool holder: HSK 100 Tool changer: 3 x 30 positions Kljdpfx Agjyk R Dyjnot Control: SINUMERIK 840 C Including chip conveyor Including documentation Machine is under power and will be available in approximately 2 weeks!

See details

Listing

Clutch for lathe CU500/CU400M ZMM SLIVEN Bulgaria CU-500 CU400

Gola

1,479 km

Clutch for lathe CU500/CU400M
ZMM SLIVEN BulgariaCU-500 CU400

Call

Year of construction: 2024, condition: new, New mechanical and electromagnetic clutches and brakes for Bulgarian machine tools of the following types: CU400, CU500, CU502, CU580M, CU582, C11MT, C11MB, C11, C13B… We also offer a wide selection of various spare parts for the above-mentioned machine tools, most of which are available from stock, while for the rest we offer the fastest possible delivery times. We cordially invite you to cooperate! Klodpfx Ajv Rpn Tognjt

See details

Listing

Valve seat milling machine SERDI, Comec, PEG, Carmec, Kwik-way SERDI3.0

Hódmezővásárhely

1,930 km

Valve seat milling machine
SERDI, Comec, PEG, Carmec, Kwik-waySERDI3.0

€27,000

EXW ONO plus VAT

Call

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, SERDI Valve seat milling machine for cylinder head - used machine, in very good condition, ready to use Klodpfxev Ild So Agnjt Technical details: Dimensions (L x W x H): 1690 x 1050 x 2170 mm Net weight approx.: 1085 kg Max. cylinder head dimensions (L x W x H): 1200 x 500 x 450 mm Crosswise work piece tilting: +42° to - 15° Min-max machining capacity: 16 - 70 mm Workhead travel: lengthwise: 930 mm crosswise: 40 mm sphere-cylinder travel (radius): 9 mm Spindle: max. spindle inclination degrees: 5 travel: 200 mm motor power: 1200 W rotation speed: 100 - 1200 RPM Connections: electric supply: 2.5KVA - 230V - 1Ph-50/60Hz air pressure supply: 6 bars air volume supply: 300 l noise level at 400 rpm 72 DBA, at 1200 rpm 82 DBA If you are interested, please contact me! More machines for sale: A-M, Serdi, Comec, AMC, Carmec, Kwik-Way, Serdi, PEG Crankshaft grinding, surface grinding, valve grinding, valve seat milling, pressure testing, parts washing, line boring, valve guide presses, vacuum tester

See details

Listing

Bending machine horizontal SCHÄFER 4-Walzen Rundbiegemaschine

Ennepetal

848 km

Bending machine horizontal
SCHÄFER4-Walzen Rundbiegemaschine

Call

Condition: used, Year of construction: 1987, pressure / t stroke / mm table-size / mm weight of the machine ca. 65000 kg Make: Shepherd Type: SVRM 4-roller bending machine: Year of construction: 1986 Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest tube diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Material SA- 738 B Material thickness: 35 mm Klsdpfx Ageuddcaonjt conical bending: Except for the top roller, all rollers can be moved in an inclined position for conical bending. The roller positions can be read on display instruments. For semi-automatic or fully automatic operation of the machine, the bearing jewels of the rollers are equipped with scale bars and slide cams for limit switch actuation. This allows the rollers to return to the same set position over and over again, giving a very high level of uniformity in the shot wefts being bent.

See details

Listing

Table Type Boring and Milling Machine PEGARD AF 9

Krefeld

801 km

Table Type Boring and Milling Machine
PEGARDAF 9

Call

Condition: used, Year of construction: 1982, spindle diameter 90 mm x-travel 900 mm Klsdpfstv H Ucex Agnst y-travel 900 mm z-axis 1200 mm w-axis 800 mm table surface area 900 x 1200 mm rotation movement 360 Grad table load 6,0 t turning speeds 25 - 1400 U/min spindle taper ISO 40 voltage 380 V / 50 Hz drive milling spindle 9,2 kW total power requirement 35 KVA weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,(3D control) • valve plate Ø 600 mm. • traverse distance: 150 mm The machine is currently not ready for demonstration due to a fault in the electrical system.

See details

Listing

Crushing and screening plant Unbekannt Schotter-Aufbereitungsanlage

Oberleichtersbach

1,053 km

Crushing and screening plant
UnbekanntSchotter-Aufbereitungsanlage

Call

Listing

Machining Center - Horizontal DECKEL DMC 80 H duoBLOCK

Germany

1,088 km

Machining Center - Horizontal
DECKELDMC 80 H duoBLOCK

Call

Condition: used, Year of construction: 2006, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 12.000 1/min tool taper: SK 50 control: SIEMENS 840D shopmill tool change unit: 240 fach size of pallet: 630 x 630mm mm Ksdpfopumdcex Agnolt spindle: 52 kW / 430Nm total power requirement: 87 kVA weight of the machine ca.: 15 t horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, prepared for Infrared Touch Probe Renishaw MP 10 without probe, tool-breakage control (mech.), MQL, airblast through spindle, oilmist suction, TRANSMIT funbction, accuracy package, mode 4, glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets approx. 98.500 h main switch on apprax. 45.500 Spindle hours *

See details

Listing

Water jet cutters FLOW 6030-Waterjet 2003 FLOW 6030-Waterjet

Wijchen

725 km

Water jet cutters FLOW 6030-Waterjet 2003
FLOW6030-Waterjet

Call

Condition: used, Year of construction: 2003, operating hours: 4,428 h, Price: On request - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Operating hours: 4428 - Drive system: CNC - Control system brand: Siemens - Power [kW]: 37.0 - Operating pressure [bar]: 4137 - X-axis travel [mm]: 6500 - Y-axis travel [mm]: 3300 Financial information Klsdswnidhspfx Agnet VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

See details

Listing

Multiple wire drawing machine - dry VEB 8 Block

Norderstedt

887 km

Multiple wire drawing machine - dry
VEB8 Block

Call

Condition: used, functionality: fully functional, machine/vehicle number: D20E/8022, Offer Number: D20E/8022 Machinetype: multiple wire drawing machine - dry Info: straight through Make: VEB Type: 8 Block Constr. year: inlet wire diameter: 2,5 mm finished wire diamter: 0,8 mm Kjdewi Tidepfx Agnslt number of drafts: 8 diameter of capstan: 400 mm speed -meters/sek: 15 m Location: Europe

See details

Listing

Portal - Machining Center WALDRICH COBURG MULTITEC 2500 AP

Germany

1,034 km

Portal - Machining Center
WALDRICH COBURGMULTITEC 2500 AP

Call

Condition: excellent (used), Year of construction: 2002, x-axis 4000 mm y-axis 3500 mm z-axis 1500 mm Control SIEMENS 840 D w-axis 1500 mm column daylight 2500 mm surface area 3000 x 2000 mm workpiece weight 10000 kg spindle turning speed range 5-6000 U/min transmission ratio 2 power capacity - milling spindle 45 kW dist. cutter spindle - workpiece spindle 3500 mm max. torque on the spindle 1250 Nm tool change unit 200 -fach tool diameter 135 / 250 mm weight of tools max. 50 kg tool length - max. 400 mm Klodpfovwgmmex Agnjt tool taper ISO SK-50 the portal milling machine is in very good condition. ADDITIONAL EQUIPMENT DRILLING/MILLING Angle milling head yes automatic tool clamping yes Tool clamping yes Ball screws yes Guideway cover yes Coolant system yes High-pressure cooling system (internal cooling) yes Full work area panelling yes Portal machining centre with tool changing system and second table top.

See details

Advertise here

Table boring millREM CPAF 132

Machine data

Price & Location

Technical details

Details about the offer

Description

Seller

Send inquiry

Telephone & Fax

Table boring mill
REM CPAF 132