Laser Cutting Machines

ROFIN DC 030

Condition: good (used), functionality: fully functional, Year of construction: 2012, operating hours: 20,200 h, load capacity: 5,500 kg, fuel type: gas, Equipment: clamp, gripper hydraulics, For sale is a Hyster S 5.5FT gas-powered forklift. The forklift is fully functional and in good condition. Ledpfx Aswalyiohzsrl Not offered with forks as shown, but with a Mayer paper roll clamp with rotary hydraulics from 2005 (last photo). Technical specifications: Year of manufacture: 2012 Rated load: 5500 kg (5.5 tonnes) Load center: 600 mm Turning radius: approx. 2375 mm - 2534 mm Lift height: up to 5300 mm Free lift: available Transmission: DuraMatch™ 1-speed or DuraMatch™ 2-speed Travel speed (loaded/unloaded): approx. 16.7 - 17.2 km/h Dimensions: approx. 3,500 mm * 1,420 mm * 2,500 mm mm Weight: approx. 7,800 kg Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website

Condition: new, Year of construction: 2025, HIDRAULIC BOOK PRESS Lrjdpfxjbyhnks Ahzel PK-55x38 H -is a double press of very new conceiving for books and agendas -it is quick and simple to use -maximum size of material; 550x380 mm -the new model has a timer

Condition: used, Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Lsdpfx Ahjt Tqy Eezerl Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: used, machine/vehicle number: 008198, X axis working area: 4200 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 18.5 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 35 Lrsdjx A Hbkopfx Ahzel Total number of tool changer positions: 26

Condition: new, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 8100332, repeat accuracy: 0.076 mm, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 25 mm, workpiece weight (max.): 245 kg, type of input current: AC, input voltage: 230 V, pressure: 2,000 bar, Do you need a precise and versatile cutting machine that doesn't take up an entire workshop floor? Then the OMAX ProtoMAX is the solution. It combines industrial quality with a compact format - perfect for workshops, schools, product development, prototyping and small series production. With water and abrasive, you can cut almost any material - from aluminum, stainless steel and titanium to carbon fiber, plastic, glass and stone. All with high precision, without heat effects or deformation. 🔹 Cutting area: 304 x 304 mm 🔹 Max material thickness: up to 25 mm 🔹 Working pressure: 2,068 bar 🔹 Power: 230 V, 1-phase (standard socket!) 🔹 Ready to run - plug & play ProtoMAX comes complete with IntelliMAX software, where you can draw, import and cut directly from the same interface. Easy to use, powerful enough for advanced jobs. Lrsdswl Ipkopfx Ahzel Do you want to show that your workshop is serious - even on a small area? Then OMAX ProtoMAX is an obvious choice.

Condition: used, machine/vehicle number: 008370, X axis working area: 5055 mm Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 19 KW Number of controlled axes: 5 axes Lsdex A Tk Sepfx Ahzerl Maximum edge height: 60 mm Total number of drilling spindles: 28 Total number of tool changer positions: 31

Condition: excellent (used), functionality: fully functional, overall weight: 3,300 kg, Year of construction: 2010, Model: GVZ 3000-D-S Lsdpfx Astgpg Iohzjrl Opening width: approx. 2.60 m incl. CW55 adapter plate (e.g. for CAT 345)

Year of construction: 2009, condition: ready for operation (used), A Lasercomb CNC high-speed die milling machine is available. Travel X/Y: 1070mm/1070mm, number of spindles: 4, spindle speed: 50000rpm, continuous power: 180W. Dimensions X/Y: approx. 2100mm/1900mm, weight: approx. 430kg. Documentation available. An on-site inspection is possible. Lsdpexbrxrefx Ahzorl

Condition: used, machine/vehicle number: 008389, X axis working area: 8417 mm Lsdpjyqxxrsfx Ahzerl Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 40 Total number of tool changer positions: 22

Condition: good (used), Year of construction: 2017, operating hours: 15,675 h, load capacity: 3,500 kg, lifting height: 4,650 mm, fuel type: gas, mast type: triplex, construction height: 2,200 mm, Linde H35T-02 Triplex 465 Freelift / Sideshift / Weighing System LPG 2017 Continuous stock, see website. Prices are ex Nuland. Van de Wert Trading B.V. holds a changing stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without warranties. (see our general terms and conditions) For a viewing and/or test drive, you are welcome to schedule a no-obligation appointment. Please call in advance as we are not always present. Lrjdpfxex Hr E So Ahzol Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland