Press brake

Safan SMK 50 2550 TS1

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Nodpfexpqy Dex Afwjwk Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: used, Year of construction: 1997, The bending press was manufactured in 1997 in England by EDWARDS PEARSON. The folding press is in good condition, sold with tools. Always serviced and maintained on time. The machine tools are connected and can be tested and inspected. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3 100 mm Nodpfx Aerfx Utsfwewk Bending capacity: 100 T Travel: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1 , Z2 , R Tools: Available Weight: 7 T Other: New screen recently replaced, keyboard attached for ease of use. If you have more questions, we will be happy to answer.

Year of construction: 2001, condition: ready for operation (used), Max. pressing force: 1000kN, max. working length: 3100mm, throat depth: 250mm, connected load: 18kW, weight: 9.5t, operational hours counter: 76,566h, with accessories and documentation, was maintained regularly. Nsdpslzizmjfx Afwewk

Condition: ready for operation (used), Year of construction: 1998, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1750 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec back stop - adjustable max. 600 mm table width 120 mm work height max. 1050 mm Number of working hours 28.500 h oil volume 200 l operating pressure 340 bar total power requirement 14.0 kVA weight of the machine ca. 9050 kg range L-W-H 2680 x 2100 x 2885 mm with increased installation height / piston stroke very well maintained condition (!!) with only approx. 28.500 operating hours - in checked condition - machine video - ?v=ZuwyPKJSYLw Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control * swiveling control panel at the front left - CNC controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) - CNC electro-motorized height adjustment of the back stop (R axis) - CNC electro-motorized adjustment of the stop fingers (Z axes) - CNC pneumatic die displacement (I axis) Nodpexaa Ursfx Afwswk - CNC motorized table crowning - WILA electro-hydraulic upper tool clamping - WILA electro-hydraulic Lower tool clamp - 1x freely movable 2-hand / foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging doors) - bending tool storage cabinet (right front, side) - original operating instructions + circuit diagram etc. further technical data: - feed speed X axis .. 500 mm/sec. - feed speed R axis .. 300 mm/sec. - feed speed Z axis .. 1000 mm/sec. - travel range X axis .. max. 600 mm - travel range R axis .. max. 250 mm

Condition: used, Year of construction: 1986, - incl. various bending tools - year of manufacture: 1986 Specifications - Capacity: 800 kN - Bending length: 2550 mm - Throat depth: 250 mm Nsdpfx Asxdc A Hjfwowk - Passage: 2050 mm - Stroke: 140 mm - Stopping time: 140 ms - Backgauge travel: 600 mm - Operating pressure: 300 bar - Motor power: 5.5 kW - Operating voltage: 400 V - Dimensions (W x H x D): approx. 3400 x 2600 x 1300 mm - Weight: 4800 kg

Condition: used, pressure 50 t chamfer lenght 1500 mm distance between columns 1220 mm Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec work stroke 156 mm Nwedpfx Ajra Rrhefwsk overrun time 59 ms tracking travel 6 mm throat 200 mm distance table - lower edge of ram 301 mm table width 160 mm table height 850 mm x-axis 550 mm travel R-axis +/- 50 Number of axles 3 (Y, X, R) St. weight ca. 3600 kg a lot of lower and upper tools incl. work light new control in 2003: Cybelec DNC 1200

Condition: excellent (used), Year of construction: 2004, machine/vehicle number: 0304/5599, functionality: fully functional, controller manufacturer: Delem, controller model: DA-65, working width: 3,000 mm, bending force (max.): 105 t, control type: CNC control, degree of automation: automatic, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, documentation/manual, european tool clamping system, Crowning: Reflex - ACSG1 Priključna moč: 11 kW Tools: Possible with agreement. NEW UPPER TOOL HOLDERS. Last service: 05/2025. Nwodpfxoxv Eafj Afwok

Year of construction: 1992, condition: good (used), machine/vehicle number: 03.323.36002, Item No. 22621 Technical Data: - Max. working length 3500 mm - Distance between columns 3050 mm - Max. pressing force 2000 kN - Distance table / ram max. 480 mm - Column overhang 260 mm - Ram stroke approx. 300 mm - Stroke speeds - Downward speed, no load max. 100 mm/sec - Upward speed 80 mm/sec - Downward pressing speed max. 10 mm/sec - Total drive power 25 kW - Space requirement approx. W 4500 x H 3150 x D 2100 mm - Weight approx. 16000 kg - including: - CNC control CYBELEC, renewed in 2008 - Controlled crowning device Njdpfx Aoip Nikefwswk - Controlled rear backstop with height adjustment 5 - 1000 mm - Hydraulic tool clamping - Upper tool + universal die set - Material supports - Two-hand control panel

Condition: good (used), Year of construction: 1998, pressing force: 150 t, stroke length: 215 mm, working length: 3,100 mm, Completely rebuilt machine. New Cnc: Step Automation Rock 15 (Touch Screen and 2D) Bending length: 3100mm Force: 150tn 6 axes (Y1, Y1, X, R, Z1, Z2) Travel/Travel: 215mm Delivered with complete set of 3 meters of punches and dies. Nodpfxeuc Txzj Afwswk *Machine in the process of retrofitting, new cnc to be installed.

Condition: used, Year of construction: 1999, pressure 130 t chamfer lenght 3550 mm distance between columns 3060 mm dayligth 510 mm Control Cybelec DNC 80 throat 320 mm Nwjdpfsvxwqfjx Afwok stroke 250 mm work height max. 900 mm weight of the machine ca. 12000 kg dimensions of the machine ca. 4,05x2,1x2,85 m Control Cybelec DNC 80 Y1;Y2;X;R axis Die shift with hand wheel 4 stop fingers hydraulic stamp clamping WILA hydraulic die clamping System Amada 2 pcs. support arms saftey 2-hand / foot operation Various stamps and matrices