Defrosting tunnel

Sairem TMW 35

Condition: good (used), 1 x GCT (Gaser-und Cryo-Technik GmbH & Co. KG) nitrogen IQF tunnel. Installed in 2021. Type - Linearfroster. Serial no. - LF H 6/125-00501. Refrigerant - Liquid nitrogen (-196 Deg). Operating temperature : Max + - 100 deg C, adjustable temperature. Belt length - 6400mm. Belt width - 1250mm. Effective belt surface - 8m2. Maximum product height - 100mm. Time passage - adjustable. Gsdpexwdbdofx Abdobg *Now decommissioned ready for collection*

Condition: excellent (used), We have two identical Steriflow 1371 EL retorts available for sale. 1300mm diameter, 7 trolley capacity, single door. They were bought to produce long life ready meals in plastic ready to eat trays. The two machines remain in lovely condition and can also be sold with 3 x 5 trolley Steriflow units if required. The retorts are currently stored in Finland and viewing can be arranged prior to them coming here to the UK. Godpfew Rn Upox Abdobg

Condition: new, Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: Gedpfxsul T Ice Abdsbg Length: 300 Width: 180 Height: 200 Electric power: 7.5 kW

Condition: like new (used), Year of construction: 2020, functionality: fully functional, STALAM RF 20 KW Gbsdeucv Huopfx Abdjg ID.NO. 2795 Stalam mod RF 20 KW microwave oven for frozen meat/fish products. Thaws the product effectively from the core outwards in a few minutes. Year mod 2020 the machine is in like new condition! Band width 140 cm. It is also possible to fry products such as bacon etc. with the machine. Dimensions 570 x 200 cm Height 340 cm.

Condition: good (used), We have three identical Steriflow 1351 EL retorts available for sale. 1300mm diameter, 5 trolley capacity, single door. They were bought to produce long life ready meals in plastic ready to eat trays. The three machines remain in lovely condition and can also be sold with 2 x 7 trolley Steriflow units if required. The retorts are currently stored in Finland and viewing can be arranged prior to them coming here to the UK. Gbjdpfjw Rpaaox Abdsg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Dohmeyer Cryogenic Spiral Freezer with Pre-freezing Tunnel Dohmeyer's spiral cryogenic freezers are designed for rapid freezing or chilling of food products using liquid nitrogen (LIN – Liquid Nitrogen). They are mainly used in the food industry, especially for products requiring quick freezing such as meat, seafood, pastries, ready meals, and other delicate products. Gbedpfjwp Uhbjx Abdsg Model: DOH-SPK-D244-W26-E21-LIN-2017 Type: Cryogenic Freezer Spiral Serial number: 201703033177 Year of manufacture: 2017 Cryogenic gas/operating pressure: LIN / 2…4 bar Compressed air/pressure range: 6…8 bar Power supply: 3x400V + N + PE, 50 Hz Weight: 16,000 kg Pre-freezing tunnel/cryogenic tunnel freezer Brand: ENT Edelstahl- und Nahrungsmitteltechnik Type: CFP 600 Serial number: 03 133/2 Year of manufacture: 2017

Condition: excellent (used), functionality: fully functional, WORKING MEASUREMENTS: Useful tape width: 55cm Number of spirals: 18 Spiral diameter: 4.20 m approx. Height of product entry: 1.20 m Height of product exit: 3.70 m Technical description: DRUM: It is the element in charge of transmitting the movement to the belt, it is built by stainless steel profiles welded to a base ring formed a kind of cage. Gbedpfswnzahjx Abdeg MAIN STRUCTURE: It is the part of the tunnel that supports the conveyor belt (through an auxiliary structure) and the drum (through the bearings). It is built with folded and welded stainless steel plate profiles. AUXILIARY STRUCTURE: It supports the belt in its movement. To avoid metal-to-metal contact, it is covered with a special high density polyethylene profile. DRUM SUPPORTS: The lower supports have two main functions: centering the drum and supporting its weight. In the upper part, other supports are placed whose mission is exclusively to collaborate in the centering of the drum. EVAPORATOR: A circular evaporator located at the bottom of the drum is used, which results in an important space saving and in a horizontal air circulation without dead spaces. FANS: Fans are placed at the top and at the bottom with the discharge directed towards the inside of the evaporator so that the air flows through the evaporator towards the product. The fans will be sized so that the air velocity, both through the evaporator and through the product, is adequate. TRACTION: Consists of an electric motor-reducer of adequate power, with previously calculated reduction ratio, so that the speed of the drum and therefore of the belt are suitable. SPEED VARIATION EQUIPMENT: This consists of a frequency variator that, by varying the power supply frequency to the preset electric motor drive (between 20 Hz. and 60 Hz.), modifies its speed and therefore the output speed of the reducer, which allows us an appropriate retention time in each case. CONTROL PANEL AND MANEUVERING BOARD: The control panel includes the electrical and maneuvering elements of the Tunnel. In its front panel there are the general maneuvering controls, as well as a synoptic of operation and with the indications of the safety and alarms indicated with a luminous signal. Inside are the control elements, frequency variator with potentiometer, electronic starters for fans and other equipment protection elements.

Condition: excellent (used), Multivac tray sealing line with auto denester. Can be supplied with optional Turbo depositing filling system. Only used for 1990 hours since new in late 2016. The best available. Gbedsw Rn Ddopfx Abdjg

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 2,250 mm, total width: 1,015 mm, total height: 1,980 mm, warranty duration: 24 months, overall weight: 850 kg, input voltage: 400 V, type of input current: AC, conveyor belt length: 1,630 mm, compressed air connection: 6 bar, product height (max.): 230 mm, tank capacity: 160 l, construction width: 420 mm, air pressure: 7 bar, number of injections: 55, conveyor belt width: 405 mm, Equipment: documentation/manual, REISCHL RPI 62/123 – High-Precision Injector with Smart HMI & Remote Maintenance The RPI 62/123 is more than just a classic injector: it combines robust mechanics with state-of-the-art software for maximum efficiency in food processing. ⭐ Your advantages at a glance Intuitive operation – no training required, ready to use immediately Global remote maintenance – service in minutes instead of days of downtime Automatic reporting – comprehensive quality assurance & documentation at the touch of a button Future-proof – modular expansion, add-ons can be retrofitted at any time Gbedpjw Rf Srefx Abdeg 🚀 Why choose RPI? Other injectors work – but are often complicated and difficult to maintain. 👉 In contrast, the RPI is as easy to operate as a smartphone and as connected as a modern industrial plant. “Service call? Instead of 3 days of downtime, we provide remote support in 30 minutes.” “New requirements? Simply book an add-on—no need for a new machine.” 🔧 Technical highlights Stitch pattern: 62/123 needles Applications: meat, poultry, fish, vegan proteins Precise feed system for even brine distribution Energy-saving LEAN drive Precision needle heads with quick-change bridge system Pneumatic suspension for each individual needle – ideal for bone-in products Stainless steel centrifugal pump with triple filtration system (mechanical/automatic) Hygienic design: complete separation of pump circuit and electromechanics Easy to clean, low-maintenance, long service life 📍 Suitable for Medium to large production lines Meat, poultry, fish, and protein processors Businesses focused on consistent quality and digital control

Condition: used, net length ± 18.300 mm net width ± 1.800 mm max. product height ± 85 mm 3 evaporators motor compressors not included (required capacity ± 224 kW) dimensions cell (not included) (l x w x h) : ± 18.300 x 3.580 x 3.447 mm evaporation temperature: - 42°C medium : ammonia/freon capacity 1.500-2.000 kg/h (depending on the product) Gbsdpoxzziaefx Abdog machine is modular and can be shortened by ± 1/3.