Verschließerkopf für BVS 30 x 60

SEEMA Verschließerkopf für BVS 30 x 60

Condition: used, Year of construction: 1998, Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 7.200 bph in 1,5L Number of moulds:  6 (molds not included) Equipped with quick change for shell molds Number of heating modules: 10 modules Neck personalization: 29/25      Working hours: 47.000 only         Machine was regularily maintained       Machine equipped with:            Sidel preforms elevator to unscrambler Sidel preforms unscrambler & feeder Sidel oven & blowing wheel for 6 molds Sidel electrical cabinet Sidel PCC drive & control panel Big set of spare parts list upon request Hedjrkgy Ujpfx Aaajk

Condition: used, Year of construction: 1998, Automatic PET bottle blowing machine Manufacturer: SIDEL Type: SBO 16/16 S1 Hjdsutni Rspfx Aaaek Year of manufacture 1998 Capacity: 16,000 for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Installed power: 347 kW Includes 1.5 L moulds Preform feeder Chiller cooling unit Technical condition: used machine, functional until dismantled. The machine is currently dismantled, assembled in elements and prepared for transport. Full and original technical documentation.

Year of construction: 1972, condition: used, machine/vehicle number: 32 416, max. working width: 1530 mm for metal sheets up to: 2,5 mm opening width top clamping bar: 290 mm adjustment bending cheek: 90 mm Hedpfx Ajy Np Aeaaok clamping bar drive: 1,1 kW below cheek drive: 3 kW rear stop: ja mm weight: 2200 kg space needed: 800x3000x1380 mm

Condition: used, Bottle filling line with an output of 30,000 bottles/h. 0.33l Vichy, 0.33l Euro, 0.35l Frucade and 0.5l NRW single-use and reusable bottles are used. The system consists of the following machines/components: -Unpalletizing system Manufacturer: Radenska & Steinle -Unpacker Manufacturer: SZA Federspiel -New glass lifter Manufacturer: Steinle Fördertechnik -Uncorker Manufacturer: Rink -Bottle washing machine Manufacturer: Krones -Crate washer -Bottle inspector Manufacturer: Krones -Beer preheater Manufacturer: Fischer -Bottle filler Manufacturer: Krones -Crown cap filling bunker with magnetic transport Manufacturer: Gassner -Bottle level control Manufacturer: Metec -Labeler Manufacturer: Krones/Renner -Label control Manufacturer: Miho -Packer Manufacturer: SZA Federspiel -Full crate inspection Manufacturer: Metec -Bottle carrier unfolder -Palletizing and palletizing system Manufacturer: Radenska & Steinle Additional title: with palletising and depalletising, years of manufacture 1993 - 2009 Capacity: 30000 bottles/h Hsdpfxovu Tt Ij Aaask Formats: 0,33 L Vichy, 0,33 L Euro, 0,35 L Frucade und 0,5 L NRW Running direction: anticlockwise Operation / Control: mainly Siemens S7 Features: Unpacking and palletizing system; unpacker; new glass remover; corker; bottle washing machine; crate washer; bottle inspector; beer preheater; bottle filler; crown cap feeder; fill level control; labeler; label control; packer full crate inspection; bottle carrier erector Layer patterns: 4x20, or 4x24, bottles, 4x8 boxes, 5 layers, on Euro pallet

Condition: new, Parts for the SIDEL blow molding machine bearings O ring nozzle Hodpfx Aajiqum Isaok strap sealing axis

Condition: used, Year of construction: 2000, machine/vehicle number: LC574, Technical Specifications & Performance Data This used bottling line is a complete isobaric PET solution engineered for high-volume beverage production of still water, sparkling water, and carbonated soft drinks. Built around robust Krones and Simonazzi process equipment with a Sidel SBO14 S2 blow molder, it offers dependable industrial packaging performance with consistent product quality. Line type: Used isobaric PET complete bottling line (second hand) Nominal speed: up to 18,000 bottles/hour (configured for 2.0 L PET; format-dependent) Bottle formats: 0.10 L and 2.0 L; additional formats possible with change parts Container type: PET (air-conveyed handling) Product range: Water (still and sparkling), CSD Core technology: Isobaric rinsing/filling/capping monoblock with downstream labeling and end-of-line packaging Line composition: Approx. 14 integrated machines including blow molder, air conveyors, rinser, isobaric filler, capper, labeler, packer/shrink wrapper, palletizer, stretch wrapper, inspection and coding modules Main manufacturers: Krones, Simonazzi; blow molder: Sidel SBO14 S2 Years: Main line 2000; blow molder 1999 Condition: Ready for operation; safety features included Advanced Automation & Control Systems Centralized PLC/HMI control coordinates blow molding, rinsing, isobaric filling, capping, labeling, and end-of-line functions. Recipe management supports format and product changeovers, with synchronized conveyors and VFD-driven motors to maintain constant flow at high speed. Line accumulation and defective-bottle rejection are integrated to minimize downtime and scrap. Automation level: Fully integrated, recipe-based operation Operator interface: Intuitive HMI with alarm diagnostics and production reporting Electrical: Industrial 3-phase supply (typical 400–460 V, 50/60 Hz; to be confirmed on inspection) Safety: Interlocked guards, emergency stop network, and category-rated safety circuits Hedjw D E Ubepfx Aaaok Production Line Integration Capabilities Designed for seamless integration across the packaging hall, the line interfaces upstream with preform handling and syrup room/premix systems and downstream with packers, palletizers, and warehouse logistics. Fast format change procedures and clearly defined change parts enable efficient switching between bottle sizes and product SKUs. Compatible with standard beverage production utilities (CIP, CO₂, chilled water) Interfaces available for inspection systems, laser/inkjet coding, and vision verification Modular conveyors allow adaptation to plant layouts and future upgrades Machine Condition & Maintenance History This second hand complete bottling line is in ready-for-operation condition with safety protections installed. The equipment has been maintained in a production environment and inspected for functional performance. Maintenance records, documentation, and layout drawings can be made available for review during a technical visit. Operational Performance & Versatil...

Condition: used, machine/vehicle number: LC594, Technical Specifications & Performance Data This complete PET bottling line is engineered for carbonated water and soft drinks, delivering consistent output and reliable quality for beverage production. It combines high-efficiency blowing, isobaric filling, labeling, packaging, and end-of-line automation into a cohesive used bottling line suitable for second hand industrial packaging operations. Production speed: 13,000–14,000 bottles per hour Containers: PET bottles, neck finish 28 1881 Blow molder: Sidel SBO10, 10 cavities Preform handling: Sidel EBH 2050 preform hopper Air conveyor: Sidel-Alsim Rinser/Filler/Capper monoblock: Sidel-Alsim PET Trybloc Asmojet 1T RV-P 48/60/10K Rinser: 48 clamps, 1 water treatment Filler: 60 isobaric valves Capper: 10 heads Premix/Mixer: Sidel-Alsim, 30 m³/h output Hjdjydn A Hspfx Aaask Bottle dryer: ACI Labeling machine: Krones Contiroll, rotary, 15 dishes, PET wrap-around, roll-fed Shrink wrapper: Acmi Fenix, film-only configuration Handle applicator: Smipack HA 35-50-70 Palletizer: Alsim Valiant 1I 1P, fully automatic, push-type Pallet wrapper: PM Pragometal OBS Rotomatic Standard Advanced Automation & Control Systems The line integrates component HMIs and automatic control features at each station to streamline operation and changeovers. The isobaric filling block ensures precise filling for carbonated beverages, while the roll-fed rotary labeling system supports continuous, high-speed label application. Quick-change mechanical adjustments and format components help maintain uptime and reduce setup times in beverage production environments. Production Line Integration Capabilities Designed for inline operation from preform loading through palletizing, the system features smooth bottle transfer via air conveyors and synchronized starwheels in the filling monoblock. It integrates upstream blowing with downstream labeling, shrink wrapping, handle application, and palletizing, creating a complete packaging machinery solution. The line is suitable for carbonated water and soft drinks and supports multiple PET bottle formats and heights associated with the 28 1881 neck finish. Machine Condition & Maintenance History This second hand line is available for sale and is presented in ready-for-operation condition. Component years range from 1996 to 2019, reflecting a well-curated selection of bottling equipment. Buyers can arrange inspection to assess performance, equipment condition, and overall line integration prior to deployment in beverage production. Operational Performance & Versatility Optimized for carbonated products, the isobaric filler provides accurate CO₂ retention and foam control. The Sidel blow molder delivers stable bottle quality, while the Krones Contiroll rotary labeler ensures precise PET wrap-around label application at the stated throughput. Downstream packaging includes film-only shrink wrapping and automated handle application for multipacks, with automated palletizing and pallet wra...

Condition: excellent (used), Year of construction: 2017, SYNCROBLOC FOR LABELING AND BEER BOTTLING IN GLASS Model: CFT S 94 / A Hsdewnybqepfx Aaajk Year: 2017 Production Capacity: Up to 12,000 bottles/hour Container Types: • 0.33 L glass bottles (long neck and champagne type) • 0.75 L glass bottles (champagne type) Supported Caps: • Crown Ø26 mm on 0.33 L long neck bottles • Crown Ø29 mm on 0.33 L champagne-type bottles • Crown Ø29 mm on 0.75 L champagne-type bottles Labeling: • Self-adhesive front and back labels for 0.33 L long neck bottles • Wrap-around self-adhesive labels for 0.33 L and 0.75 L champagne-type bottles PE LABELER Maximum Output: • 12,000 bottles/hour without orientation • 11,000 bottles/hour with orientation Operations: • PLC + touch-screen panel for control • Automatic speed adjustment via inverter and sensors • Status indicator column light Main Components: • 4 self-adhesive labeling stations • Optical fiber system for bottle orientation • Photoelectric sensors for transparent labels • Label ionizer to eliminate static charges • No-Stop labeling system (label change without stopping production) Safety and Structure: • CE-compliant safety guards with protective doors • Plate rotation with servo motors and encoders • Electrical cabinet in AISI 304 stainless steel CFT MONOBLOCK COMPOSED OF: • Fixed nozzle rinser, single treatment, 30 grippers • Isobaric filler with 30 valves • Crown capper with 6 heads • Pitch between valves: 113 mm • Supported bottle diameters: 50 - 98 mm • Supported bottle heights: 125 - 365 mm • Production Capacity: 12,000 bph on glass bottles Filling Features: • Servo-controlled valves for electronic filling phase management • MasterTronic system for automatic regulation of filling phases (pre-evacuation, filling, decompression) • CIP/SIP system for sanitization with automatic dummy bottles Crown Capper • Suitable for Ø26 mm and Ø29 mm crown caps • Centrifugal cap feeder with cap presence sensor • Pick & Place device for cap transfer • Pressure heads with magnetic pickup AUTOMATIC QUALITY CONTROL INSPECTOR Checks Performed: • Minimum and maximum filling level (with foam compensation) • Cap presence via photoelectric sensor • Label presence with dedicated sensors • Automatic ejection of non-compliant bottles Software Features: • Real-time visualization of filling and production statistics • Storage for up to 60 bottle formats • MODBUS connection for remote data management INKJET CODER • Printing of codes on bottles and labels • Support for different types of ink CAP ELEVATOR

Condition: used, functionality: unexamined, Bottled water production line for PET bottles in the following formats: 0.5 L, 1.5 L, and 2.0 L. Line output: approx. 16,000 bph The line includes the following machines: 1) KHS triblock bottling machine, filler type 45-80-10, year 1998 (approx. 20,000 bph), control: S7-200 Hodpfswv Trlex Aaaek - KHS bottle washer, Innoclean FR-EM 45 - KHS filler, Innofill EV 80 - ALCOA KUPI 10/540 capper (max. 25,000 bph) 2) KRONES Contiroll 745 labeller, year 2000 (16,000 bph), control: S7-300 3) Shrink packer with tunnel – ZVT PSP 032 S, year 1998 4) Bottle liquid level inspection device – METEC Promecon 2000 5) Set of KHS Innoline slat conveyors – several dozen linear metres, including curves and dividers The machines are used, regularly serviced, and require a technical inspection before recommissioning. Currently dismantled and stored in containers, ready for transport. The line is prepared for reassembly – each element is marked with a unique identification number.

Condition: used, Glass bottle filling line for beer and non-alcoholic beverages for filling 9000 bph. Includes: - Empty bottle inspector: Inex type Optiscan 4s - Bottle filler and capper: Krones type 28/7, built in 1975, with 28 filling valves and 7 capping stations - Capper: Adelski, with 4 capping stations - Labeling machine: Pirzer, built in 1979, for belly and neck labels, with 8 labeling stations - bottle transport Additional title: years of manufacture: 1975 - 1979 Capacity: 9000 bo/h Hjdpow Tmt Aefx Aaajk Formats: 0,5 l Euro bottle; crown cap; screw cap; 20x0,5 l beverage crate Features: empty bottle inspector; bottle filler and capper (28 filling valves and 7 capping heads); screw-capper; labelling machine; bottle transport