Tumbler machine TRB 150

Siapro d.o.o. TRB 150, 1x11kW

Year of construction: 2022, condition: like new (used), Machine is suitable for foundries, or standard work. Machine height : ~5.250 mm Machine width : ~3.300 mm Machine length : ~2.500 mm Maximum work volume : 0.150 m3 (150 litres) Maximum load weight : 300 kg Maximum piece weight : 15 kg Blast compartment diameter : ~750 mm Blast compartment length : ~850 mm Number of blast wheels : 1 x 11kW E-Eco Frequency inverter for turbine : 1 pcs Magnetic cleaner : 1pc Godjlqxn Rspfx Agpoit Blasting time : Adjustable PLC : Siemens S7 1200 Modem : 1 pc Safety fance with fotocell : Yes Automatic abrasive filling : Da Filter : Integrated in the machine Total installed power : ~16 kW Machine working hours : 37h The machine is on stock. A test of the machine in our premises is possible with prior notice

Condition: good (used), Year of construction: 2014, spindle turning speed range 170 - 18000 U/min weight of the machine ca. 7,5 t dimensions of the machine ca. 5,00 x 4,00 x 2,20 m --> Control conversion (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data Grinding diameter: 20 - 300 mm --> Oscillation diameter: 350 (500) mm --> Workpiece length: 300 (1300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min-1 --> Grinding stroke speed: 0 - 9.99 m/min-1 --> Feed rate: 0 - 99.99 m/min-1 --> Step feed value during reversal: 0 - 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min-1/R --> Grinding stroke speed: 0 - 5 m/min-1/R --> Feed rate: 0 - 99.99 m/min-1/R --> Step feed value during reversal: 0 - 0.999 mm / Ø --> Swivel capability of the workpiece headstock: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm --> Resolution: 0.001 mm / Ø Gisdpfx Asw Intajgpot --> Travel speed: 5 m/min-1 --> Centre height above workpiece table: 200 (300) mm --> Centre height above grinding table: 330 (430) mm --> Workpiece spindle passage: 50 (70) mm --> new in 1988

Year of construction: 2024, condition: new, Bending capacity: 6 mm Bending: 5 mm Bending capacity: 6 mm Bending: 5 mm Bending length: 2,030 mm roller diameter: 170 mm Engine power: 4 kW Length: 3.600 mm Width: 1,020 mm Height: 1.120 mm Weight: 2.400 kg The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information on request. Gijdpfjftdh Isx Agpjt

Condition: used, Year of construction: 1998, honing diameter 90 mm stroke 490 mm Gisdpjt Hw T Sefx Agpjt throat 400 mm total power requirement 10 kW weight of the machine ca. 3.500 kg dimensions of the machine ca. m

Condition: ready for operation (used), Year of construction: 2019, operating hours: 11,111 h, spindle speed (max.): 4,000 rpm, controller manufacturer: HAAS, controller model: n/a, This HAAS ST-20 was manufactured in 2019. A robust horizontal turning machine featuring a 210mm hydraulically actuated chuck, a VDI turret with 12 tool stations, and a spindle speed of 4,000 rpm. It supports a maximum load of 330 x 572 mm and bar diameters up to 64 mm. Ideal for precision turning operations. Contact us for more information about this machine. Giodpfx Agex D Ezfepet Additional equipment • Additional Options: Driven 4000 rpm tool and C-axis, 12 stations BMT65, Automatic tool presetting arm • Features: Hinged belt chip conveyor, Lathe parts catcher • Coolant System: 208l coolant tank, Variable coolant flow • Other Features: Visual part programming system (1GB), Hydraulically actuated 210mm chuck A2-6, Early detection module for power failure, Synchronized tapping, safe running, Control touchscreen, Ethernet, HaasConnect, HaasDrop, M130, WLAN • Additional Features: Macros, SOM Machine Benefits Technical Machine Benefits • Maximum load capacity: 330 x 572 mm / diameter range for bars: 64 mm • Type: vdi turret with 12 tool stations • Type: programmable hydraulic tailstock • Preparation for robot / driven toolschip conveyor and tool measurement are includedOPTIONAL: Tool holders at an additional cost. See pictures attached

Condition: used, Year of construction: 2014, functionality: fully functional, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✨✨Buy directly from the manufacturer and secure your price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ————— ✅System contents ►1 unit - Large, gas-heated powder oven ►1 unit - Automatic powder coating booth ►1 unit - Small, electrically heated powder oven ►2 units - Room-type mono-cyclone manual powder coating booth ►6 units - Automatic powder coating guns ►3 units - Manual powder coating guns ►1 unit - Automatic powder recovery unit ►6 units - Mono-cyclone separators ►1 unit - Automatic control panel ►1 unit - Automatic bar movement system (speed controlled) ►2 units - Mobile platforms (speed controlled) ►8 units - Parking stations ►300 m - Conveyor rail, 1000 kg capacity ►12 units - Suspension bars Our facility is located at Anhaltstr 30, 14943 Luckenwalde. You are welcome to schedule an appointment to view the machines. Giodpfx Agjiivq Ujpst The plant has been in operation for 10 years. As the direct manufacturer, we can modify the machines according to your requirements by mutual agreement. It doesn’t fit your existing installation site? We can adjust the layout accordingly. Please check the system’s PDF file via the link below.

Condition: used, Year of construction: 2021, operating hours: 28,000 h, functionality: fully functional, workpiece weight (max.): 80 kg, grinding wheel diameter: 508 mm, workpiece weight between centers: 80,000 g, distance between centers: 800 mm, grinding wheel width: 80 mm, spindle speed (max.): 1,000 rpm, feed length X-axis: 370 mm, feed length Z-axis: 800 mm, feed rate X-axis: 15,000 m/min, feed rate Z-axis: 7,500 m/min, overall weight: 7,250 kg, input frequency: 50 Hz, input voltage: 400 V, We are offering a used STUDER favorit_1044 cylindrical grinding machine, manufactured in 2021. Type: favorit_1044 Serial No: 1044- Giedpsylld Dsfx Agpet Year of manufacture: 2021 Voltage: 400 V Frequency: 50 Hz Weight: 7,250 kg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2020, spindle speed (max.): 3,400 rpm, number of axes: 4, This 4-axis HAAS ST-30Y horizontal turning machine was manufactured in 2020. It features C+Y-axis capability, a 3,400 rpm A2-6 spindle, and a 12-station BMT65 turret. The machine is equipped with an automatic tool presetter, bent-type chip conveyor, and programmable tailstock. The machine can be inspected under power and test cuts are possible upon request. Gisdpfxsyh Hw Is Agpot Contact us for further details. • Running hours: 556 h • C+Y-axis • 3,400 rpm A2-6 spindle • 12-station BMT65 turret • Programmable Tailstock Additional equipment • Bent-Type Chip Conveyor • Oil skimmer • Exhaust system • Automatic Tool Presetter (ATP) • WIFI camera • Remote Jog Handle

Condition: used, boring: 63 mm M 12x1,5 M 16x1,5 M 18x1,5 M 20x1,5 M 22x1,5 M 10x1 Giedpfx Ajcn Tb Esgpjt diameter: 160 mm roll width is different: 60, 70, 80 mm

Year of construction: 1988, condition: as good as new (ex-display), machine/vehicle number: 1116/87, MANUFACTURER: ELTERMA/IPSEN MODEL: VDFC-413 DESCRIPTION: Vacuum tempering furnace YEAR OF PRODUCTION: 1988 Gisdpfxsm E Tvhe Agpot STATUS: New unused, need revamping of the obsolete parts ( Cabinets ) Max Load Dimensions: 610x900x500mm Max Load Weight: 500 kg Working temperature: 150-750⁰C Approximate warm-up time of the vacuum chamber at 550 ° C for 30 minutes