Blowing Machine SIDEL

Sidel SBO 6

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Pgodpfx Adsg Ailcjlsk Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: used, Year of construction: 1992, Automatic PET bottle blowing machine Manufacturer: SIDEL Type: SBO 4 S1 Year of prod. 1992 Capacity: 4,000 for 1.5 L / 2 L bottles Installed power: 150 kW Includes 1.5 L molds Pgsdpfx Aswa Rhrsdlek Preform feeder Technical condition: used machine, starts up, program is functional

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, product height (max.): 380 mm, workpiece diameter (max.): 130 mm, production capacity: 7,200 unit/h, TECHNICAL DETAILS Number of cavities: 6 Capacity with standard bottles: up to 7,200 bph Product formats Bottle volume: 0.25 – 3.0 L Max. bottle height: 380 mm Max. bottle diameter: 130 mm Preform dimensions Max. preform length: 210 mm Neck inner diameter: 34 mm MACHINE DETAILS Dimensions & Weight Blow module dimensions: 2,000 x 2,200 x 2,200 mm Blow module weight: 8,000 kg Oven dimensions: 3,000 x 1,100 x 2,100 mm Oven weight: 2,000 kg Control cabinet dimensions: 1,500 x 1,000 x 2,100 mm Control cabinet weight: 1,000 kg Transformer 415V / 380V dimensions: 1,000 x 500 x 2,000 mm Transformer weight: 500 kg Preform hopper and conveyor dimensions: 3,000 x 1,500 x 3,500 mm Preform hopper and conveyor weight: 600 kg Preform feeder dimensions: 2,000 x 2,500 mm Preform feeder weight: 250 kg Infeed guide rail length: 2,000 mm Power supply Total power: 142 kW Mains connection: 380/420 V +/- 10%, 50 Hz +/- 1% Cooling water Cooling capacity: 16,000 kcal/h Pjdox A Uu Ejpfx Adljgk Water temperature: 10 – 12°C Flow rate: up to 6.0 m³/h Water pressure: 5 – 6 bar Compressed air Service air pressure: 7 bar Service air flow: 50 – 100 Nm³/h Blowing air pressure: up to 35 bar Blowing air flow for 0.25 – 3.0 L: 155 – 770 Nm³/h EQUIPMENT Transformer 415V / 380V Preform hopper and conveyor Preform feeder Infeed guides Adaptation to other voltages possible

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 13-13, The BLOMAX 4 Blowmoulding machine is of the model 13-13. The machine has no defects and operates in excellent condition with full functionality. Pgjdst Akgwopfx Adlok Power : 400V/150A/60000W Year of construction : 2000

Condition: used, Year of construction: 2008, Overview  The machine was built in 2008 by the former manufacturer SIG Corpoplast (now KHS). The machine is still in operation and can be inspected at any time. Technical data Capacity: last 21.115 bph (at 1,5l)  Formats: 500ml, 750ml, 1.000ml, 1.500ml  PCO 1881  Operating voltage: 400V/ 50 Hz   Control voltage: 24 VDC  Scope of delivery  Blow molding machine | SIG Corpoplast | BLOMAX 12 | 2008  Preform feeder | Transver AG | - | 2008 Silo  Elevator  Sorting Chute Pjdpfxjplgmbs Adlogk

Condition: good (used), Production capacity of up to 4000 b/h (depending on the format) For formats between 0,25lts up to 3lts Composed by: • Oven for heating the preforms composed of 6 heating modules with 8 infrared lamps each • Preform transfer Wheel • Two-stage compressed air blowing body, low pressure pre-blowing and subsequent high pressure blowing. • Bottle transfer Wheel • Delivered with pallet turner. Pjdpfowcggvox Adlegk DOCUMENTATION AVAILABLE

Condition: used, mileage: 633,119 km, power: 265 kW (360.30 HP), first registration: 10/2011, fuel type: diesel, empty load weight: 11,130 kg, maximum load weight: 14,870 kg, overall weight: 26,000 kg, tire size: 315/80 R22,5, axle configuration: 6x2, wheelbase: 5,100 mm, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, loading space volume: 52 m³, loading space length: 7,750 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, Equipment: ABS, additional headlights, air conditioning, spoiler, Cylinder: 6, roof hatch, driver's seat air-suspended, mirror heating, electric mirrors, radio / CD, plastic mudguards, continuous brake system, sun visor, body manufacturer: EGGERS Brinkum/Bremen, sliding tarpaulin, Edschaverdeck, device for mounting a truck-mounted forklift, combi fuel tank aluminum 680 L and 75 L AdBlue right, self-steering lift axle, wheelbase: 5,100 x 1,360 mm, subject to alterations, prior sale and errors excepted. Pgedpfjh Tg Ugox Adlok

Condition: good (used), Automatic labeling machine Pgsdpfx Ajhz Daujdljk

Condition: new, Year of construction: 2025, Complete sample system for a water production plant to do 3.000 cycles per hour. Including Blow Molding Machine (with 4-cavity blow molding machine, air compressor, air dryer group, chiller, blow mould), Bottle Feeding Table, Automatic Rinsing/Filling/Capping Machine, Cap Feeding Machine, Lamp Inspection Box, Drying Device, Automatic Label Shrinker Machine, Code Spraying Machine, Automatic Wrapping Machine, Conveyor System. Way of production: Bottle blowing > bottle rinsing > bottle filling > bottle capping > lamp inspection > labelling > thermo shrinking > code spraying > wrapping. - Specifications: 3000 cycles/h (at 500ml); bottle volume: 350-1500ml; PET bottles; standard 28/30mm PET caps; 1500 liter of water filling /hour; 500 liter of water for rinsing per hour, gravity filliing, 24 bottles in a multipack. - Specification depending on final layout and customized combination of machines/modules. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Psdpfx Asv Nla Aodlogk

Condition: used, Year of construction: 2004, operating hours: 45,000 h, Used Blow Molding Machine KOSME KSB 4L up to 6800 bph The KSB 4L blow molding machine is built specifically for producing PET bottles. Notably, it offers a robust, compact solution for high-performance production. Its design is both innovative and technically straightforward. As a result, it ensures optimal efficiency and a high quality-to-price ratio. With four cavities, it effectively produces up to 6,800 bottles per hour. In addition, it accommodates formats from 0.1 to 2.5 liters. The solid, well-organized structure of the KSB 4L provides operators with flexibility and reduced maintenance needs. Furthermore, the machine has completed 22,000 hours of operation. It also includes two original molds, one for 0.5 liters and one for 1 liter. Heating system and preform feed in the Blow Molding Machine KOSME KSB 4L To achieve its heating capabilities, the KSB 4L’s heating system uses four heating modules and eight heating provides a heating capacity of 46 kW. Moreover, its patented positioning system places infrared lamps precisely, thereby ensuring optimal external heating of preforms without opening the oven. For efficiency, the conveyor belt system for preform feed orients and positions the preforms. It streamlines the heating process and thus reduces preparation times. Blowing process and production efficiency Pgedpfsvgvb Eex Adlek Furthermore, the Blow Molding Machine KOSME KSB 4L’s pneumatic preform separation system adjusts the preforms’ distance from 40 mm in the oven to 120 mm in the mold. Then, the blowing process operates in a fully replaceable station, which adapts to different bottle diameters as needed. Afterward, the transfer unit moves heated preforms into the mold cavities, where they undergo sealing, stretching, and blowing. Each cavity consequently produces up to 1,700 bottles per hour, thereby achieving high precision and stability in production. Consumption and energy requirements In terms of energy, the KSB 4L operates on a voltage of 3 x 230/400 V, with a frequency of 50 or 60 Hz, an installed power of 56 kW, and an average consumption of 36 kW. Additionally, the compressed air system maintains a working pressure of 10 bar and a blowing pressure up to 40 bar, consuming 470 Nm³/h of air. In addition, the cooling system requires a water flow of 6.6 m³/h at an inlet temperature of 5 to 7 °C, achieving a cooling capacity of 20.8 kW. Operator advantages and maintenance Notably, the design allows easy access to all internal components, thereby enabling quick format changes and simplifying mold replacement, which takes an average of only 30 minutes. Furthermore, its linear movement arrangement and durable construction materials minimize maintenance needs. Additionally, the touch-screen interface lets operators input parameters for different types of preforms and bottles, and the system offers password protection to enhance operational security. Conclusion of the Blow Molding Machine KOSME KSB 4L In conclusion, the KSB 4L serves as an ideal solution for those seeking a reliable and high-performance used machine that produces PET bottles with precise specifications and optimized consumption.