Door Lock Drilling Machine

SMM Sondermaschinenbau SE 250D

Condition: excellent (used), Year of construction: 2007, High speed moulder infeed comprising a freestanding flat magazine for use in front of a high speed moulder. The infeed magazine is driven by hydraulic motors powered by an 11kW hydraulic unit (max 150m/min). 15kW hydraulic unit (max 200m/min) possible to offer also. Suitable for 300mm wide feed material. A buffer of feedstock is alligned laying flat side by side on the chain cross feeder. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and the transport roller then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow operation of the EM814. Djdpfx Abeggghmeuekh

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 Dkodpjcggy Sofx Abuoh - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

Condition: excellent (used), Line for door jambs (frames), with END-CUTTING, ROUTERING for COUNTER-PLATE and HINGE INSERTION (Anuba). Composed of: Dsdeqwyclopfx Abuskh X10030A) Loading Conveyor X10030B) Transfer Conveyor X10030C) Double-end cutting and drilling machine "AMS" - Left-side Cutting 45° - Drilling - Cutting 90° - Right-side Cutting 45° - Drilling X10030D) Angular Conveyor (90°) X10030E) Anuba Inserting Machine "MASTERWOOD" Mod. MULTITEC X10030F) Strike Plate Routering Machine "MASTERWOOD" Mod. Teknomat 3000

Condition: new, Year of construction: 2024, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) Djdjhw Ng Iepfx Abuskh USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device

Condition: excellent (used), Gold anodized panels Working dimensions 2.5 x 1.1 m Electric heating Fully functional, tested You can call or write to us. We speak and write German and Russian. Dsdpfju I N D Hex Abuekh You can also send messages in English. 31.3.5

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U-shape with angle transfer Consisting of: Dedpsu Afu Rjfx Abuekh 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Condition: refurbished (used), FULL LINE of Drilling, max working width mm 3200, with fast automatic handling equipment. Composed of the following machines: Dkedpfxsdfgg Is Abuoh A) LOADER (Portal) "RBO" Winner C 3200 with double pick-up and central motorized rollers table. With 2 on-ground motorized rollers ways to in-feed the piles (stacks) of panels to loader. B) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° C) 1st Auotmatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units D) 2nd Automatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units E) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° G) UNLOADER-STACKER (Portal) "RBO" Winner SC 3200 with double pick-up, with double storage station, with central motorized rollers table. With 2 on-ground motorized rollers ways to out-feed the piles (stacks) of panels from the Unloader

Condition: excellent (used), Year of construction: 2017, operating hours: 35,000 h, functionality: fully functional, Year of manufacture: 2017 Commissioning: 06-2017 Spindle hours: approx. 8,000 Control: Mazatrol Smooth X Dodpjyam D Ujfx Abuskh 5-axis simultaneous machining Maximum turning diameter: 658 mm Maximum turning length: 1,519 mm Travel paths: - X-axis: 615 mm - Y-axis: 250 mm - Z-axis: 1,585 mm - W-axis: 1,574 mm - B-axis: -30° to 210° Rapid traverse: - X/Y/Z/W: 50/40/50/30 m/min Main spindle: - Drive power: 30 kW - Maximum spindle speed: 4,000 rpm - C-axis - Max. bar capacity: 80 mm Sub spindle: - Drive power: 26 kW - Maximum spindle speed: 4,000 rpm - C-axis Milling spindle: - Drive power: 24 kW (oil-air lubrication) - Maximum spindle speed: 12,000 rpm - B-axis: 0.0001° - Capto C6 Tool magazine / ATC: - 72 tool stations - Max. tool diameter: 90/125 mm - Max. tool length: 400 mm - Max. tool weight: 12 kg Special equipment: - Mayfran Consep 2000 II chip conveyor, dual change filter - Preparation for high pressure coolant (IKZ) 70 bar - 70 bar high pressure pump, 7 pressure stages - Air blow device at upper turret - Interface for bar feeder - Automatic parts catcher (D:80 x L:150 x 5 kg) - Gear milling - Milling spindle synchronized thread cutting - Constant incline angle during rapid traverse movement - Thread re-cutting function - Turning/milling function in Mazatrol - 5-axis machining package for SmoothX: - EIA/ISO 5-axis simultaneous machining - F) Tool tip control for 5-axis simultaneous machining - Spline fine interpolation - 5-axis spline interpolation - Sub spindle with C-axis including synchronization C1+C2 - Preparation for multiple and flash tool toolholders Dimensions / Weight: - Dimensions (L x W x H): 4,910 x 2,800 x 2,720 mm - Weight: 16,900 kg General machine options: - B-axis 0.0001° - C-axis main spindle input accuracy 0.0001° - Sub spindle positioning without C-axis input accuracy 0.001° - Absolute positioning system (linear axes) - Working area lighting - Operator door with safety interlock - CE standard - Double foot switch for both main and sub spindle - Separate switches for opening/closing chucks - Hydraulic pressure lock - Fully enclosed work area - Automatic opening/closing of chuck jaws for main and sub spindle - Chuck status feedback for main and sub spindle - Chuck status feedback via sensors - Tooleye for upper and lower turret - Lead error compensation input X, Y, Z - Standard tool set (lower turret)

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Dedpfx Abefi Tg Houjkh Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Lamella - carcass press with rapid traverse Technical data: Lamella carcass press from our showroom; Working range: width from 150 - 2.500mm , height from 150 - 1.400mm; depth 700mm; - lamella press beam top with 6 elements, lamella press beam side with 5 elements - lamella press beam with practice-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressing bars is infinitely variable electronically controlled by 2 potentiometers and adjusted via frequency converter, therefore the torque transmission is absolutely wear-free. - Pressing force for horizontal press bars min. 500 daN (kg) to infinitely variable max. 2200 daN (kg) - Pressing force for vertical press bars min. 300 daN (kg) to stepless max. 2200 daN (kg) Dedpfx Aboiidm Njuokh - Including option: Rapid traverse speed for fast positioning of the press bars, controlled by automatic workpiece recognition with sensors in the press bars, press speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Jog mode for precise positioning of the two pressing beams e.g. for low pressing forces, drawers and carcasses 45 degrees. Simple operation via 6 separate pushbuttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm. Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg - immediately available -