New tipping container

Stahl 0,8 m³

Condition: new, Forklift tipping container, tipping container, tipping trough, forklift tipping, waste tipping container, scrap tipping container -Condition: New -with steel lid: made of galvanized sheet -Content: 0.8 m³ Hedpsdbr Uzsfx Am Ter -Intake: for forklift tines -Max. Tine width: 150 mm -with tilt mechanism -Storage: stackable -Corrosion protection: powder coated -Dimensions: L /W/H 1750/750/870 mm -Number: several available -Price: per pieces -Own weight: 200 kg

Condition: new, Year of construction: 2026, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Hodjmk S Slspfx Am Ter Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language. In our offer we have a lot of welding machines we developed ourselves and they are all digitally and software based MIG MAG, MIG PULS SYNERGIC welding machines, also for robot welding with touch screen monitor, TIG ac dc with touch screen monitor, digital plasma cutting machines, electronics for controling the high pressure water jet pump, sand dispenser for water jet cutting, voltage THC with touch screen monitor... We are also very involved in innovation and development, please take a look at our other products, if you are a manufacturer, and are interested in discussing further, we are also selling know-how.

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm Hodpfx Ajw S Efzjm Tsr rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) Hedpfx Aeqt Dmysm Ter - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 2014, condition: good (used), For sale: a Nilfisk compact safety industrial vacuum cleaner Type CTS40 M Z22 400 V 4 kW 9 A 50 Hz 114 kg Explosion-proof The vacuum cleaner is in good condition and ready for immediate use. Machine buying and selling WE BUY/SELL PRODUCTION AND METALWORKING MACHINES, AMONG OTHER THINGS. Hodpfxehu Sf He Am Tsr Do you need a high-quality, yet affordable, metalworking machine for your production? Or would you like to sell yours? For more information or to contact us, please visit our website.

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Hodpfx Amefi Tg He Tor Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: good (used), Year of construction: 2007, travel distance X-axis: 750 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 725 mm, CNC control Sinumerik 840D NC-rotary table B-axis automatic tool changer for 320 tools pallet changing device, 2 pallets 500 mm x 500mm coolant through spindle device IKZ (80 bar) chip conveyor coolant device Technische Daten / technical details: X-Weg längs / X-travel longitudinal 750 mm Y-Weg senkrecht / Y-travel vertical 750 mm Z-Weg quer / Z-travel cross 725 mm B-Achse / B-axis 360 ° Spindelaufnahme / spindle taper HSK 63A Drehzahlbereich Spindel / spindle speed 50-10000 Upm /rpm Werkzeugplätze / tool places in changer 320 Vorschub / infeed 60000 mm/min Eilgang / rapid feed 60 m/min Antriebsleistung Spindel 40/100% ED / drive capacity spindle 40/100%ED 37/24 kW Hedpeq Ui Hqjfx Am Tsr Gewicht der Maschine ca. / weight ca. 15000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), SK 50 holders (28627) Various manufacturers: Bilz Kelch Sandvik Clarkson Approx. 90 pieces Hedowl U Tcopfx Am Tor

Condition: used, Year of construction: 2008, without briquetting press Filter area 32 m² with funnel transition to container or connection to rotary valve Hedpfxsvxlqme Am Tsr used, top condition, little used Brand Schuko Type Vacomat 300 Year of manufacture 2008 Clean air device / negative pressure GS dust-tested BIA-tested CE type-tested Motor 7.5 kW Connection diameter 300 mm Pressure pa. 3090 Air output 5800 m³/h Control Filter pressure monitor Extinguishing device powder extinguisher New price approx. 17,000.00 EUR Space requirement approx. 3600 x 1590 x 2550 mm / 4400 without funnel Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee and warranty

Condition: used, functionality: fully functional, Year of construction: 2000, overall weight: 1,000 kg, total height: 3,500 mm, load capacity: 2,500 kg, throat depth: 5,000 mm, working height: 3,000 mm, DGUV certified until: 06/2025, Equipment: documentation/manual, Column-Mounted Jib Cranes & Wall-Mounted Jib Cranes TAUCHA / DEMAG / LIFTKET – 50 kg to 2,500 kg – Electric Chain Hoist – Multiple Systems Available For sale are several column-mounted and wall-mounted jib crane systems from Mechanik Taucha Fördertechnik GmbH, Demag, and Liftket. The systems offer a load capacity range from approximately 50 kg up to 2,500 kg, making them suitable for use in workshops, manufacturing plants, assembly workstations, as well as in in-house logistics. Some of the cranes are designed as classic column-mounted jib cranes with a single jib arm, while select models feature a double-jib column design, allowing coverage of two separate working areas. All cranes are equipped with electric chain hoists and trolley carriages, operated via pendant controls. The systems can be purchased individually. Inspection by appointment is possible. Taucha Column-Mounted Jib Crane – Load capacity 2,500 kg Heavy-duty column-mounted jib crane with floor-mounted steel column and jib arm for industrial lifting and assembly applications. Taucha Column-Mounted Jib Crane – Load capacity 2,000 kg Column jib crane with pivoting jib for material handling in production and assembly areas. Taucha Column-Mounted Jib Crane – Load capacity 1,600 kg Industrial crane with column base and pivoting jib, suitable for medium to heavy loads. Taucha Column-Mounted Jib Crane – Load capacity 1,250 kg Column jib crane with jib arm and trolley for precise material movement. Taucha Column-Mounted Jib Crane – Load capacity 1,000 kg Column jib crane with electric chain hoist and pivoting jib for assembly workstations. Taucha / Liftket Column-Mounted Jib Crane – Load capacity 1,000 kg Column jib crane with Liftket electric chain hoist, suitable for industrial lifting operations. Taucha Column-Mounted Jib Crane – Load capacity 800 kg Column jib crane with pivoting jib and trolley, ideal for workshop and production areas. Taucha Column-Mounted Jib Crane – Load capacity 800 kg (Double Jib) Column jib crane with two opposing jib arms, suitable for servicing two workstations. Taucha / Liftket Column-Mounted Jib Crane – Load capacity 500 kg Column jib crane with electric chain hoist, ideal for lighter lifting tasks. Hedpfoyt Hc Dsx Am Tjr Liftket Column-Mounted Jib Crane – Load capacity 500 kg Column jib crane with Liftket chain hoist and pivoting jib. Demag Wall-Mounted Jib Crane – Load capacity approx. 315 kg Wall-mounted jib crane with Demag electric chain hoist, suitable for workstations with limited space. Taucha Column-Mounted Jib Crane – Load capacity 250 kg Compact column-mounted jib crane for light loads. Taucha Column-Mounted Jib Crane CS KD 250-6 – Load capacity 250 kg Column-mounted jib crane with pivoting jib and electric chain hoist. Liftket Column-Mounted Jib Crane – Load capacity 250 kg Column jib crane with Liftket electric chain hoist for assembly tasks. Taucha Column-Mounted Jib Crane – Load capacity 200 kg Column jib crane for light material handling. Taucha Column-Mounted Jib Crane – Load capacity 125 kg Lightweight column jib crane for smaller components and tools. Taucha Column-Mounted Jib Crane – Load capacity 100 kg Compact workshop crane for light loads. Taucha Column-Mounted Jib Crane – Load capacity 50 kg Very light jib crane for small lifting applications.