MOT. Rod steel twisting machine

THOMAN ME 112

Condition: used, Year of construction: 1986, plate thickness 6,0 mm Ndjdpfx Ajg Ip Efoh Ujf pressure 18 t cutting angle - upper blade 90 ° blade length 225 x 225 mm voltage 380 V total power requirement 5,5 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1,10 x 0,80 x 1,05 m - Angular stops adjustable

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: 06 61 218, Comm. no.: Lg 32821 Single side decoiler BBT ABH 2000/400 exhibition machine, unused machine no.: 06 62 218 year of manufacture: 2021 Technical data load capacity approx. max. 2.000 kg strip width max. 400 mm Coil inner diameter approx. 450 to 520 mm Coil outer diameter max. 1,500 mm Unwinding speed approx. 2 to 15 min.-1 With adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase geared motor. Spreading of the support segments manually by means of hand crank Nsdpfx Asg U Utveh Ujdf via joints Number of supporting segments 3 Coil side guide via strong limiting arms, clampable. Reel stand in strong box construction as welded design. construction. Additional equipment: Shutdown "belt loop too small" by antenna switch, attached to the column of the bottom housing of the loop control. Infinitely adjustable in height. Tape side guide at the bottom housing of the loop control, by means of lateral guide rods. The passage width is continuously adjustable.

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Machine No. 51265 Year of manufacture: approx. 1967 Travel paths X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle taper SK 40 - S20 x 2 Spindle speed 40–2000 rpm, 16 steps Motor power 1.0 and 1.6 kW, pole-changing Power supply 380 Volt, 50 Hz - Feed on X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at vertical milling head 60 mm Nodpfx Ahoghtvas Uodf - Swiveling, rotating, and tilting angle table - Coolant pump in machine base - Separate control cabinet Space requirements L x W x H 1100 x 1100 x 1600 mm Weight 690 kg In good condition

Year of construction: 2004, condition: good (used), machine/vehicle number: 2004-3-11A, - Manual feed of the milling unit - Work table height adjustable via hand wheel - horizontal and vertical material tension - Cutter diameter up to 250 mm - max milling height 150 mm - max milling depth 80 mm - max milling length 305 mm - angle adjustable stop Li + Re 20 - 90 ° - milling spindle speed 4500 rpm - Drive 400 V 3.2 kW - Compressed air supply 6 - 8 bar - Air consumption per working cycle 10 l - Pneumatic profile clamping - Table underframe Ndodpfx Ahof E Higs Ujf - Space requirement approx. W 1100 x H 1300 x D 700 mm - Weight approx. 200 kg

Condition: excellent (used), Year of construction: 2003, Universal cylindrical grinding machine with internal grinding attachment Year of manufacture: 1991, geometrically overhauled in 2003 Nodoxama Uopfx Ah Uodf Technical data: Table: Centre height: 180 mm Max. grinding diameter: 360 mm Between centers: 1500 mm Max. automatic table travel: 1580 mm Hydr. table speed: 0 – 3000 mm/min Max. table swiveling range: ± 5° Workpiece headstock: Workpiece spindle speeds: 30 – 300 rpm Workpiece spindle taper: MT 5 Tailstock taper: MT 4 Max. swiveling range: 90° Grinding spindle head: Spindle speeds: 1450 – 1600 rpm Grinding wheel diameter/bore: 450 x 127 mm Min. / max. grinding wheel width: 20 - 50 mm Max. swiveling range: 90° Min. automatic grinding head infeed: 0.005 mm Internal grinding attachment: Spindle speed: 17,000 rpm Spindle diameter: 60 mm Min. / max. grinding diameter: 18 - 100 mm Max. grinding depth at large diameter: 130 mm Motor power: Grinding spindle head: 5.5 HP Internal grinding attachment: 1 HP Dimensions and weight: Machine dimensions L x W x H: 4200 x 1400 x 1500 mm Machine weight: 3300 kg Accessories / Special features: • Manual or automatic operation • Internal grinding attachment • 3-jaw chuck • 1 fixed steady rest • Wheel dresser • 2 additional grinding wheel flanges • Balancing arbor • Wet grinding attachment The hydraulic table cylinder has just been newly sealed. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 2013, condition: ready for operation (used), A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A TIG, lower for electrode welding approx. 60 percent, mains input: 3x400V 50Hz, protection class: IP23S, duty cycle at 100 percent 450A TIG at 40°C, electrode welding current approx. 360A at 100 percent duty cycle for electrode in the 450 DC version, input fuse protection: 32A at 400V three phase for 450 versions, length: 520mm, width: 360mm, height: 460mm, weight: approx. 28kg. An on-site inspection is possible. Ndsdpfx Ahjxddamj Usf

Year of construction: 1987, condition: good (used), for cutter Ø up to max .: 300 mm Saw stroke adjustable by hand: 550 mm Infeed by hand via spindle: 150 mm Height adjustment by hand via spindle approx .: 130 mm Table semicircle Ø: 500 mm Saw blade drive: 380 V, 2.2 kW Saw blade speed: 2700 rpm Ndjdpfsghl Emjx Ah Ujf Space requirement approx .: 1000 x 900 x 1300 mm Weight approx .: 100 kg

Condition: used, Year of construction: 1989, Year 1989 angle stop 30 -120 Grad good condition . Anschlag weight 600 kg +++++ Njdsliuihjpfx Ah Uodf Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Max. welding power 20 kVA Short circuit power 25 kVA Nominal power at 50 % ED 10 kVA Throat 500 mm Max. Secondary short circuit current 10 KA Connected load 15 kVA Dimensions W x D x H 400 x 1100 x 1150 mm Weight 200 kg Accessories / Special features: - Water cooling by external connection - Adjustable current time 0 - 10 - Adjustable electrode force by adjusting the spring - Mechanical foot switch Note / Reference value: With a max. secondary short-circuit current of 10 KA, a max. sheet thickness (normal sheet) of 2.5 mm can be welded. Ndjdpfxofi Tl He Ah Uef Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: ready for operation (used), Saw blade Ø: 300 mm Cutting range at 90° round: 100 mm Cutting range at 90° rectangular: 90 x 90 mm Nsdpfol Ra Uiox Ah Uodf Cutting range in mitre at 45° rectangle: approx. 40 x 120 mm Saw blade speed: 33/66 upm Drive motor: 380 V, approx. 1.3 kW Required space: 850 x 600 x 1600 mm