Band Saw

THOMAS ZIP 28 DUAL MODE

Condition: excellent (used), The fully hydraulic production rapid-frame bandsaw features a universal hydraulic system for either exclusive or alternating cutting of thin- and thick-walled profiles as well as solid material, without the need to change the saw blade, using a standard tooth pitch of 3 or 4 teeth per inch. It is equipped with a pre-tensioned bow guide, enclosed oil hydraulics, three-position pivot bearing, separate coolant system, infinitely adjustable hydraulic cutting pressure, lift-off movement, accelerated return stroke, and comes standard with a continuously adjustable mitre device. Rapid traverse for saw bow lifting. The oscillating vice ensures optimal use of the saw blade. Longitudinal guide with ground and hardened guide rails transfers cutting pressure forces to the saw bow. Automatic end-stop shutdown. Push-button controls for ON, OFF, and rapid traverse lifting of the saw bow. Hjdpfsxdwbksx Abvjni Manufacturer: KASTO Model: Metal Frame Bandsaw Machine type: PSB 280 U Drive power: 2.2 kW Stroke rates: 40/51/64/80/102/128 per min Cutting speeds: 11/14/19/22/28/38 m/min Universal hydraulics: standard Saw feed: Hydraulic Round cutting capacity: 280 mm Flat cutting capacity: 280 x 150 mm Mitre adjustment: 0–45° Material support height: 600 mm Weight: 650 kg Dimensions (L/W): 1500 x 600 mm Height: 1000 mm Saw blade dimensions: 450 x 40 x 2 mm Year of manufacture: 1988 Accessories: Coolant equipment, rapid traverse lowering, rapid traverse raising.

Condition: new, Year of construction: 2024, Manual band saw machine for cuts from 0° to 60° right. Hydraulic belt tension, loop handle with control button. Combination belt guide with lateral bearings. Carbide cutting tips and an upper bearing. Manual pruning or pruning option without the user, with the weight of the bracket and controlled by hydraulic brakes; then the bracket is raised again manually to the desired position. Manual clamp for quick and precise blocking of the part. Rotation of the bracket from 0° to 60° to the right with locks, precise measurement of the angle, manual vice with quick-release lever. Millimetric degree scale rod. Coolant tank integrated on the upper side of the base frame with a discharge nozzle and electric coolant pump for cooling on both sides of the saw blade guides. Control voltage 24 VAC, main switch and control. Maximum current protection and short circuit. Hsdogculvspfx Abvjni Connection voltage: 400V/50Hz/3Ph standard. Machine colour: yellow RAL 1018 and gray RAL 7036. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2025, PROFILE BENDING ATTACHMENT PB20 The PB20 profile bending attachment is the optimal supplement for tube bending on the 3000 and 6000 models. The device can be easily and quickly mounted on the bending shaft without the use of tools. The workpiece is clamped onto the turntable with the clamping device and pulled around the bending tool. With this system, leg lengths to be bent can be accurately measured in conjunction with a length stop and can be bent with repeatable accuracy. Hodonh R Ekopfx Abvoni TECHNICAL DATA: - Bending capacity steel 37: 100 x 10 mm, Ø 20 mm. - Many standard tools available - Special tools possible - Sharp-edged tools with bending radius R2 or 5 mm - round tools R 10 to 25 mm for bends max. 260° optional OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, - Shaft diameter 30 mm - Rotates to the right and left - Emergency stop - Documentation - 230V Hnjdolzgwhopfx Abvoi

Condition: new, NEBES TM 275 Band Saw Machine - 400 v Three-phase NEW "CE" INDUCTION motor Cast iron structure Adjustable cutting angle from 0° to 60° All cast iron structure Electric pump for blade lubrication and cooling Oil-bath blade tensioning gauge Front controls and two cutting speeds Deviator for exclusion of coolant pump Blade guide with carbide skids (H.M.) Round cut 0° 220 mm Square cut 0° 200 x 200 mm Flat Cut 0° 230 x 185 mm Round cut 45° 150 mm Square cut 45° 150x150 mm Flat Cut 45° 150x200 mm Round Cut 60° 90 mm Hnsdpfx Aoh Nm Ncobvsi Square Cut 60° 90x90 mm Flat Cut 60° 90x120 mm HP 1.3 Voltage 400 V Blade size 2450 x 27 x 0.90 mm Weight 265 kg

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm Hsdshpktvspfx Abvjni band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Condition: new, round material 30 x 1 mm square material 30 x 30 x 1 mm 16 mm 30 x 10 mm speeds 9 U/min total power requirement 1,1 kW weight of the machine ca. 0,32 t Hjdpfoh D Svnex Abvsni dimensions of the machine ca. 0,82 x 0,60 x 1,26 m Electric roller profile with - 5 set of rollers 2x 20mm and 30mm for round material, 1x for flat material 1x for square material 1x for? - footswitch

Condition: used, Technical details: grinding wheel diameter: 200 mm voltage: 220 380 V / Hz revolution per minute: 3000 U/min Hedpfsu Ngu Sox Abvoni total power requirement: 900 Watt weight: 22 kg dimensions L x W x H: 0,23 x 0,46 x 0,25 m Double sanding block; table-top unit with sanding supports left/right, horizontally adjustable 30mm max. sanding discs Ø 200mm max. grinding wheel thickness 32mm currently clamped sanding discs on the sanding block: left = Ø 190mm x 30mm type H50 and right = Ø 180mm x 32mm type M20 *

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width 250 mm cutting speed 45 / 90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm capacity 45 degrees: flat 135 x 185 - 145 x 150 mm Hedpfx Abslb I Daoveni capacity 45 degrees: round 150 mm capacity 45 degrees: square 145 mm capacity 60 degrees: flat 63 x 107 - 69 x 90 mm capacity 60 degrees: round 70 mm capacity 60 degrees: square 70 mm capacity 90 degrees: flat 240 x 160 - 250 x 110 mm capacity 90 degrees: round 225 mm capacity 90 degrees: square 185 mm total power requirement 0,75 / 1,1 kW weight of the machine ca. 200 kg dimensions of the machine ca. 1385 x 580 x 890 mm Technical features: - Hydraulic head descent control system - End stop at the end of the cut - Powerful three-phase induction motor with 2 speeds and Transmission with oil bath - Saw frame, vice and swivel group made of cast steel - Steel blade guide with ball bearings - Vice with quick clamping - Lever integrated on the front for locking the miter adjustment - Coolant pump with aluminum body - Large hand wheel for easy saw blade tension - Pressure gauge to show the belt tension (600-1000 kg/cm3) - Emergency stop safety switch - Swarf brush for cleaning the saw blade STANDARD EQUIPMENT: - Mountable base cabinet - coolant tank - Electric coolant pump - Length stop for serial cuts - Band change and settings tools - Chip removal brush - Hydraulic cylinder with feed control

Condition: new, Cutting range at 90 degrees: round 220 mm Cutting range at 90 degrees: square 210x210 mm Cutting range at 90 degrees: flat 230x185 mm Cutting range at 45 degrees left: around 150 mm Cutting range at 45 degrees left: square 150x150 mm Cutting area at 45 degrees left: flat 150x210 mm Cutting range at 60 degrees left: around 90 mm Cutting area at 60 degrees left: square 90x90 mm Cutting range at 60 degrees left: flat 90x100 mm Saw blade dimensions 2450x27x0,9 mm cutting speed 35/70 m/min working height 915 mm vice opening 265 mm total power requirement 1,2 kW Hodohcw S Sspfx Abvoni Machine weight approx. 240 kg Space requirement approx. 1550x870x1740 mm The Zimmer Z241/R is a self lowering saw for mitre cuts from 0° - 60° left. After the cut the machine stops by a safety limit switch. The lowering is infinitely variable via a hydraulic system. The manual lifting of the saw arm after the cut can be done at any position. The saw arm remains in the desired position. Standard equipment: - with ICS lowering - Saw arm can be swivelled up to 60° to the right - Quick-action vice - Band guide made of carbide - hydraulic saw blade tensioning, tensioning pressure indicator, blade breakage switch-off - incl. coolant device - incl. machine base cabinet - hydraulic cylinder - emulsion pump - eccentric clamp - saw band - 400 V plug 16 A