Toolroom milling machine

TOS INTOS EMCO FN 20/32/40

Year of construction: 1998, condition: new, New trapezoidal screw and nut for the X-axis, for FN20, FN32, FN40. Nedpfx Aek Nk Iwom Tocw

Condition: new, Bernardo DG 32 Pro Drill Grinding Machine Specifications Drill diameter: 2 – 32 mm Point angle: 90° - 135° Speed: 4800 rpm Motor power: 0.25 kW Voltage: 230 V Length: 350 mm Width: 210 mm Height: 305 mm Weight approx.: 32 kg Scope of delivery • SBC diamond grinding wheel • ER 20 collets, 3 – 12 mm, 10 pcs. (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 mm) • ER 40 collets, 13 – 32 mm, 20 pcs. (13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 23 / 24 / 25 / 26 / 27 / 28 / 29 / 30 / 31 / 32 mm) • ER 20 or ER 40 collet chuck Features • Includes a setup for point grinding, i.e., improved centering of the drill tip on the workpiece and reduction of the required feed force • 30 ER collets included in the scope of delivery, which are also suitable for clamping intermediate sizes • Additional station for back-grinding the drill cutting edges (relief angle) Ncodpfxegd H U Uj Am Tsw • Universally adjustable point angle from 90° - 135° • Rotor with precision ball bearings ensures smooth running • Fast and precise working results due to simple operation • Vibration-free operation due to high inherent weight and rubber feet

Condition: used, Year of construction: 2022, front tire size: 710/60R38, rear tire size: 900/65R46, Equipment: front power take-off, VarioGrip / tire pressure regulation system Ncodpfx Aeucqcqjm Tsw

Condition: used, mileage: 155,000 km, power: 51 kW (69.34 HP), first registration: 12/2009, fuel type: gasoline, next inspection (TÜV): 08/2025, color: red, gearing type: mechanical, emission class: euro4, number of seats: 4, Equipment: ABS, air conditioning, electronic stability program (ESP), immobilizer system, soot filter, Hello! We are pleased to welcome you. We are offering you the vehicle with the following equipment: Please be sure to leave us your telephone number in your message! * Heated seats * Electric windows on both sides * Air conditioning * Valid MOT until 08/2025 * Roof spoiler in vehicle color * Individual interior styling package * Heated front seats * Individual styling package * Titanium X package 1 * Outside temperature display * On-board computer * Electric brake force distribution * Isofix mounts for child seat * Engine 1.2 liter - 51 kW 8V CAT * Rear seat split / foldable Our services: Ncedetxfn Nepfx Am Tew - Fresh TÜV+ASU - Delivery throughout Germany - Test drive possible at any time - Attractive financing conditions - Vehicle trade-in Opening hours also on Sundays by appointment

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet Nsdpfewrm Dtjx Am Tocw About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: good (used), 1 used twist drill grinding machine Manufacturer: Darex Model: XT 3000 Technical data Motor: 230 Volt – 0.2 kW – 50 Hz Speed: 2850 rpm Grinding type: Conical surface, cross grinding Point angle: 118°–150°, steplessly adjustable Grinding range: 3–21 mm Nodpoyl Idasfx Am Tscw Dimensions (W x D x H): 410 x 410 x 260 mm Weight: 25 kg Equipped with: Grinding attachment and cross table for grinding countersinks

Condition: new, We sell spare parts for the following milling machines: FN20, FNGJ20/30, FNGJ32, FNGJ40, FNGJ50, FNGP, FNG CNC FB3, FB4, FB5, FB6 as well as for lathes S32. Nsdpfx Ajufgb Iom Tocw

Condition: used, x-travel 800 mm y-travel 400 mm z-travel 300 mm digital readout Heidenhain table surface area 1000 x 520 mm turning speed range 40 x 2000 U/min Nedsqpl Uuspfx Am Tecw spindle taper SK 40 total power requirement 2,2 kW weight of the machine ca. 2,2 t dimensions of the machine ca. 1700 x 1600 x 1800 m

Year of construction: 1983, condition: ready for operation (used), machine/vehicle number: 2810-3076, table mounting size: movement x: 560 mm movement y: 450 mm movement z: 450 mm tailstock stroke: 80 mm spindle taper:SK 40 spindle turning speed range: 40 - 4000 rpm Ncedpfofnry Hjx Am Tjw carriages continuously adjustable: 2 - 2000 mm/min rapid move: 4 m/min space needed: 2000 x 2150 x 2030 mm weight: 2720 kg

Condition: used, Univ. universal tool milling machine DECKEL, type FP 1 Machine no. 52185, year of manufacture 1968 Travel distances: X: 300 mm, Y: 150 mm, Z: 340 mm Table size: 600 x 250 mm Spindle mount: SK 40 - S20 x 2 Njdpfedzqb Sjx Am Tecw Spindle speed: 40-2000 rpm, 16 steps Motor power: 1.0 and 1.4 kW, pole-shifting Power connection: 380 volts, 50 Hz - Feed in the X and Z axes - Two motor speeds and 8 gear stages - Quill travel on the vertical milling head: 60 mm - Fixed tilting table - Coolant system in the machine base - Adjacent control cabinet - Counter holder with counter bearing for horizontal milling, SK 40 Space requirement L x W x H: 1200 x 1100 x 1600 mm Weight: approx. 1000 kg Very good condition