Hydr. CNC press brake

TRUMPF TrumaBend V85

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, pressing force: 85 t, stroke length: 215 mm, throat depth: 410 mm, clearance between the columns: 1,750 mm, working length: 2,050 mm, TECHNICAL DETAILS Press force: 85 t Bending length: 2,050 mm Frame gap: 1,750 mm Stroke: 215 mm Throat depth: 410 mm Controlled axes: y1, y2, x, R MACHINE DETAILS Control manufacturer: DELEM Total power: 13 kW Dimensions & Weight Dimensions (L x W x H): 3,190 x 2,100 x 2,375 mm Machine weight: 8,750 kg EQUIPMENT Two-hand foot operation 2 support arms Crowning Die shifting CNC control Side safety doors Giodpfx Agey Ix Ipepst 2 manual backgauge fingers

Condition: new, Year of construction: 2023, arm reach: 1,400 mm, load capacity: 6 kg, New welding robot TIG OKIO AB6-C1400 -Country of origin: China Godpfx Agsqnt N Dopjit -Type: AB6-C1400 -Number of axes: 6 -Reach: 1400 mm -Maximum payload: 6 kg -Control cabinet -Remote control -Wire feeder -Welding source: TIG WSM400R -Cooler

Condition: good (used), Year of construction: 2002, functionality: fully functional, stroke length: 365 mm, throat depth: 410 mm, Hydraulic Press Brake Make: TRUMPF Model: TrumaBend V85 Year: 2002 Technical Specifications Manufacturer: Trumpf Model: TrumaBend V85 Year of manufacture: 2002 Press force: 85 t Stroke: 365 mm Gijdsy R Arkjpfx Agpjt Bending length: 2050 mm Frame gap: 1750 mm Throat depth: 410 mm Table width: 120 mm Working height: 1050 mm Dimensions (approx.): L 2.6 x W 1.80 (plus 0.5 m support arms) x H 2.90 m Weight: approx. 9,050 kg Equipment • Control: Delem DA 2D Graphic • 2 movable support arms • Pneumatic die shifting • Hydraulic tool clamping, top and bottom • CNC-controlled crowning • Controlled axes: X1, X2, R1, R2, Z1, Z2 • Gooseneck upper tool, 86°/R1, H 120 mm, L = 1,960 mm, segmented • Straight upper tool OW202/K 28°/R1, H 120 mm, L = 1,935 mm, segmented • Lower tool V10/84°, R1, H 100 mm, L = 2,050 mm, segmented • Lower tool V24/80°, R 2.5 mm, H 100 mm, L = 2,000 mm, segmented • Lower tool V16, L = 1,000 mm • Lower tool V30, L = 500 mm All information without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: used, Year of construction: 2001, functionality: fully functional, Press force 85 t, Bending length 2050 mm, Distance between uprights 1750 mm, Control DELEM, Stroke 215 mm, Throat depth 410 mm, Total power 13 kW, Weight 8,750 kg, Machine dimensions 3190 x 2100 x 2375 mm Gedpfx Ajw Imq Regpoit

Condition: used, Year of construction: 2004, functionality: fully functional, Amada HFE 220- L Gjdsuiwypspfx Agpjit Year of construction 2004 Laser height adjustment Working width 3100mm pressing force 220 tons with many tools

Condition: good (used), Year of construction: 2001, functionality: fully functional, Hydraulic press brake Make: TRUMPF Model: TrumaBend V85S Year of manufacture: 2001 Technical specifications Manufacturer: Trumpf Model: TrumaBend V85 S Year: 2001 Pressing force: 85 t Bending length: 2550 mm Throat depth: 420 mm Stroke: 215 mm Dimensions: L 3.1 x W 1.80 (plus 0.5 m support arms) x H 2.40 m Weight: 8.8 t Equipment - Controlled axes: Y1, Y2, X, R, Z1, Z2 - 2 movable support arms Gisdpjy Dr Ibefx Agpjt - CNC-controlled crowning - Hydraulic upper tool clamping system (Trumpf system) - Pneumatic die shifting - Delem 2D graphical control - Tool package: Upper tool, straight, H 140 mm, R 1 28°, L 2500 mm, segmented Lower tool V8/86°, H 100 mm, L = 2500 mm, segmented All specifications without guarantee. A demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 2005, Used 2-meter CNC press brake from Trumpf Model: TrumaBend V85s Capacity: 2050 x 85 tons Gjdpfx Ajy Dpufsgpsit Control: Delem DA69 Axes: Y1, Y2, X, R, Z1 and Z2 Hydraulic WILA upper and lower clamping Year of manufacture: 2005

Condition: new, pressure 25 t Gisdeb U Hwpspfx Agpst throat 200 mm stroke 4 - 80 mm table surface area 520 x 400 mm no. of strokes 160 Hub/min ram surface 160 x 160 mm ram adjustment 40 mm ram hole 32 H7 mm hole in the table 200 x 150 mm clamping plate 500 x 380 x 60 mm total power requirement 2,7 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 1,3 x 1,0 x 1,85 m

Condition: ready for operation (used), Year of construction: 1998, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1750 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec back stop - adjustable max. 600 mm table width 120 mm work height max. 1050 mm Number of working hours 28.500 h oil volume 200 l operating pressure 340 bar total power requirement 14.0 kVA weight of the machine ca. 9050 kg range L-W-H 2680 x 2100 x 2885 mm with increased installation height / piston stroke very well maintained condition (!!) with only approx. 28.500 operating hours - in checked condition - machine video - ?v=ZuwyPKJSYLw Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control * swiveling control panel at the front left - CNC controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) - CNC electro-motorized height adjustment of the back stop (R axis) - CNC electro-motorized adjustment of the stop fingers (Z axes) - CNC pneumatic die displacement (I axis) - CNC motorized table crowning - WILA electro-hydraulic upper tool clamping - WILA electro-hydraulic Lower tool clamp - 1x freely movable 2-hand / foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging doors) - bending tool storage cabinet (right front, side) - original operating instructions + circuit diagram etc. Gjdpfxsxaa Urs Agpsit further technical data: - feed speed X axis .. 500 mm/sec. - feed speed R axis .. 300 mm/sec. - feed speed Z axis .. 1000 mm/sec. - travel range X axis .. max. 600 mm - travel range R axis .. max. 250 mm

Condition: used, Year of construction: 1994, machine/vehicle number: 883050, functionality: fully functional, Dimensions: 257 cm width x 220 cm depth x 242 cm height Weight: 8,320 kg Max. pressing force: 850 kN (85 tons) Max. bending length: 2,050 mm Distance between uprights: 1,750 mm X-axis travel: 600 mm Stroke height: 220 mm Gedpfx Agoylh N Njpsit Controlled axes: X, Y, R, I Control system: Delem Equipment: 6 backgauges Condition: Technically sound, except for oil leakage Crowning: wedge-type crowning The machine is operational and in good overall condition.

Condition: excellent (used), Year of construction: 2016, Inca Onset X2, 3/4 automized Color configuration: 8 channel printer with four colours (CMYK) 1/12th of the new price !!!!! Printhead status allowing to print at maximum speed with outstanding quality, up to 140 beds per hour/700m² per hour, needs replacement of 60 heads (circa 45.000€) The machine is in excellent shape, serviced by manufacturer since day number one. Annual maintenance done in May 2025. Available: January 2026 Gsdpfx Aoun Swbegpsit As the business expands, Onset X2 provides the capacity to extend the range of jobs companies can handle. The addition of a second set of CMYK delivers even higher productivity - up to 707m²/hr* (equivalent to 138 full-bed sheets/hr) - while an optional six channels can be populated with light cyan (Lc), light magenta (Lm), white (W) and orange (O) to add versatility and superb quality. A choice of uni-directional, bi-directional and super high-quality print modes can be selected depending on the specific job requirements. * Based on an approximate 6 second material handling time. Decomissioning, transport, installation, training and warranty are included (in Europe) For further technical details please refer to enclosed data sheet.

Condition: ready for operation (used), Year of construction: 2001, number of axes: 5, This 5-axis TRUMPF TrumaBend V85 press brake was manufactured in 2001. It features an electro-hydraulic ram drive, CNC backgauge system, and a modern protective cover. The machine includes a 4-axis back gauge system and both hydraulic upper and lower tool clamping. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V85 machine we have for sale. Contact us for more information about this machine. Additional equipment • Top drive concept in two-cylinder design y1/y2 • Electro-hydraulic ram drive with proportional valve technology • Ram travel measuring system with spring deflection compensation via glass scales • Modern block hydraulics • Cnc backgauge system • Safe finger adjustment from the front • Self-centring, manual, hardened upper tool holder for vertical tool change • Hardened, manual lower tool holder • Programme-controlled lower tool displacement (i-axis) for 2 positions • Modern protective cover Machine Benefits Technical Machine Benefits • Oil cooler • Working width 2. 000mm Extra Information Special Equipment: Gjdpfx Agex D Nkdepeit Back gauge system 4 axes (X, R, Z1, Z2) Hydraulic and hardened upper tool clamping (Wila system) Hydraulic lower tool clamping (Wila system) CNC crowning BendGuard safety device 2 pcs. Support brackets Network No tools included

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, stroke length: 215 mm, throat depth: 410 mm, bending force (max.): 85 t, distance between stands: 1,750 mm, working length: 2,050 mm, TECHNICAL DETAILS Press force: 85 t Bending length: 2,050 mm Distance between uprights: 1,750 mm Stroke: 215 mm Throat depth: 410 mm MACHINE DETAILS Control: DELEM Dimensions & Weight Machine dimensions: 2,700 x 2,100 x 2,400 mm Weight: 7,900 kg EQUIPMENT Two-hand operation 2 support arms Side safety doors Lasersafe Fissler Gisdpfjyhmdqex Agpet Wila tool clamping Adjustable die position Crowning system Tool cabinet

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 min. module 0,5 stroke length max. 0 - 52 mm spindle taper innen MK 4 table diameter 160 mm table bore diameter 75 mm no. of strokes 355 - 630 Hub/min Gedpfetycg Ssx Agpsit feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW weight of the machine ca. 2.500 kg With rack and pinion unit Change gear set Year of construction: Approx. 1981

Condition: good (used), Year of construction: 2005, functionality: fully functional, Used 2-meter CNC press brake from Trumpf Model: V85 Capacity: 2050 x 85 tons Delem CNC control CNC-controlled Y1, Y2, X, and R axes Wila hydraulic upper clamping Year of manufacture: 2005 Without tools Gjdpfx Agsx I N Awopeit