BAND SAGE

TTMC BS260G

Condition: used, Year of construction: 2001, dimensions of the machine ca. 1450 x 1560 x 2620 mm weight of the machine ca. 1,8 t The machine frame is a solid welded construction. Bodpjwbi Awefx Ad Aelr The cooling oil tank is located in the machine bed. The cross table is made of cast iron, guideways are ground and scraped with adjustment strips. The shaper head is also made of cast iron, the guides are ground and scraped, with lubrication grooves. The push head can be swiveled +/- 20 degrees. Stroke adjustable through side opening. Tool is positioned at the longitudinal stop. The machine has a mechanical stroke drive. The control for the CNC dividing head is housed in the control panel. The zero point can be set in any position of the dividing head and with the division options of 2-999 symmetrically and 99 divisions asymmetrically. Machine color: Green Color dividing head: red --> Digital operating instructions available in German + English

Condition: used, Year of construction: 1996, spindle diameter 60 mm x-travel max. 1000 - min. 100 mm y-travel max. 1000 - min. 100 mm bore capacity in steel max. 40 mm thread capacity max. M24 Thickness max. 60 - min. 5 mm spindle turning speed - stepless einstellbar 1 - 1.000 U/min feed stepless einstellbar, Eilgang 1 - mm/min feed stepless einstellbar, Arbeitsgang mm/min feed power 16 KN tool taper SK 40 spindle stroke 600 mm positioning speed in allen Achsen 1 - 10.00 mm/min positioning accuracy auf 300 mm = +/- 0,01 mm table load max. 500 kg work height max. 1000 mm weight of the machine ca. 4,8 t dimensions of the machine ca. 3,5 x 3,3 x 3,1 m Control Bosch CNC plate drilling system HMB PBM1000/60 - W12 for drilling head plates and Bledpogvkkzsfx Ad Asr Base plates in steel construction with tool changer (12x) Number of drilling spindles: 1 pc. Operating Voltage: 220/380V Frequency: 50 Hz Total connection value: 22 kVA

Condition: used, Year of construction: 1973, machine/vehicle number: 20591, roll diameter:500 mm Bjdpfocxxr Eox Ad Ajlr throat:1050 mm workpiece height:400 mm volt:400 V table-size:750 x 800 mm total power requirement:5,5 kW weight of the machine ca.:1,5 t dimensions of the machine ca.:2,4 x 1,0 x 2,2 m stable cast stand construction, cutting speed adjustable via manual gearbox and variator, band tensioning device, tilting work table +/-40°, rear add. table, various saw band guides, grinding device, work light, foot pedal

Condition: excellent (used), Year of construction: 2009, Bernardo FM 45 V drilling and milling machine. The FM 45 V drilling and milling machine offers an optimal price-performance ratio thanks to the standard spindle feed. The dovetail guide of the gear head ensures maximum precision and stability. Drilling capacity in steel 32 mm Drilling capacity in cast iron 40 mm Throat 260 mm Spindle speed (12) 50 - 2520 rpm Spindle mount MK 4 Quill stroke 120 mm Quill feed (3) 0.12 / 0.19 / 0.26 mm/rev Table size 820 x 240 mm Distance spindle / table 40 - 485 mm Travel path (x / y) 550 / 190 mm Height adjustment of milling head 400 mm T-slot size 14 mm T-slot distance 55 mm Motor output power S1 100% 0.85 / 1.1 kW (400 V) Motor input power S6 40% 1.1 / 1.5 kW (400 V) Machine dimensions (W x D x H) 1150 x 850 x 1450 mm Weight approx. 285 kg Standard with automatic spindle feed and thread cutting device Large speed range 50 - 2520 rpm (12 levels) Dovetail guide for x, y and z axes, adjustable via wedge strips Versatile application options, slot milling, face milling, boring,.... Solid large cross table, precisely surface-machined Milling: spindle feed via handwheel Drilling: spindle feed via handwheel High-quality aluminum motor, designed for continuous operation Stable and vibration-free cast design Simple and quick speed change using a gear lever Bjdpfevutw Hsx Ad Aslr Pivoting milling head for angle drilling, milling bevels, etc. Location: from stock 54634 Bitburg - available at short notice -

Condition: good (used), Year of construction: 2010, LZ-Lathe Fabr.JET Type :GHB-1330 Bj.2010 with 3 ash digital indicator, 3 jaws lathe chuck DM 160 mm tool holder Multifix size A, 2 steady rests coolant device. Turning diameter overbed: 330 mm Turning diameter over face: 197 mm Center width: 750 mm Spindle speeds: 70-2000 rpm spindle bore : 38 mm Machine in good condition from the training workshop Machine documentation available . Bodsqwgzqspfx Ad Aolr

Condition: new, Cardan shaft balancing machine BVI-03-74 Available in stock in Poland !!! Delivery time: one day!!! . . Machine for driveshafts weighing up to 150kg and up to 4700mm long. Suitable for small workshops with a large range of different shafts, including trucks. This balancing machine has high productivity and serves to balance the cardan shafts of cars and trucks. It makes the process of balancing the cardan shaft easy thanks to many technical solutions, while the machine has an affordable price, which reduces your financial burden and allows you to develop your business effectively. . . TWO TIMES faster than your machine. This balancing machine is majored to balance the shaft not only qualitatively, but also quickly. If you can balance in 2-2.5 times faster, then this is your real competitive advantage. . . HIGH PERFORMANCE ACCESSORIES The machine is equipped with three main types of adapters: 1. Fast clamping universal adapters. It has two main advantages: The first is that due to the special design the driveshaft flange is clamped within 5 seconds. This advantage is due to the fact that the driveshaft flange does not need to be fixed with bolts. THE SHAFT CAN BE CLAMPED 4 TIMES FASTER WITHOUT BOLTS. The second advantage is the centering rings. The driveshaft is mounted in the adapters with centering rings that can be made on an ordinary lathe to fit most common driveshafts. 2. KV Flange adapters. Used for balancing shafts with cross-tooth flanges. Applies to four flange sizes: 120, 150, 180, 205 mm. Usually used on truck driveshafts. 3. Adapter with slots. Used to mount various flanges with holes. Mounting the driveshaft is the same as on universal adapters, with the help of centering rings. KEY FEATURES • Balancing of 2, 3 and 4-support cardan shafts • Shaft length up to 4700mm, weight up to 150kg • Cardan installation in 1 minute • Standard set of adapters - Installation of 80% of cardan shafts; • Three ways of fixing the center bearing • Soft-bearing type machine - high sensitivity to any vibration • Machine is operated by one worker • Sliding bearing supports - quick changeover, comfortable operation • Safety bracket with clamp for quick installation • Measurement in all planes at one time • Calibration of the machine by the operator • Displays imbalance in real time • Create and print reports SPECIFICATIONS Maximum cardan shaft weight 150 kg Maximum flange diameter 300 mm Maximum length of cardan shaft 4700 mm Number of machine supports 4 Number of simultaneously measured planes 2, 3, 4 Minimum achievable residual specific imbalance, 10 g mm/kg Rotor speed range 1000-2000 rpm Power supply 380V, 3 Ph, 50Hz Power, minimum, 2,2 kW Dimensions (length x width x height) 6000 х 1100 х 1450 mm Weight 700 kg ! We manufacture а full range of equipment for drive shaft balancing and repair service. Please contact us to get the best offer! Blodpfxepbv Tfs Ad Asr

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width max. 245 x 150 mm voltage 230 V power capacity 1,5 kW dimensions of saw-band 2480 x 27 x 0,9 mm mitter cutting 0 - 60 ° cutting speed 20 - 90 m/min weight of the machine ca. 185 kg dimensions of the machine ca. 1,4 x 0,69 x 1,7 m Bodpfx Adonlbmze Aelr - stepless speed - stepless feed - miter cut - Bi-metal saw band - Material stop - Machine base - Coolant device

Condition: new, New lathe with large spindle bore. Brand : KMS Type : CS6250C TDC : 1000mm Bodpfx Adehhm Ede Aslr Turning diameter over bed : Ø 500 mm Turning diameter over slide : Ø 300 mm Turning diameter in bag : Ø 710 mm Turning length in bag: 240 mm Bed width : 390 mm Spindle diameter : Ø 105 mm Spindle speeds : 12 (36 - 1600 rpm) Tailstock spindle diameter : 75 mm Tailstock range : 150 mm Tailstock recording : MC 5 Machine dimensions : ± 2630 x 975 x 1270 mm (L x W x H) Machine weight: ± 2100 kg Machine equipped with: - Longitudinal and transverse feed. - Rapid traverse on longitudinal and transverse feed. - Movable and adjustable stops for automatic longitudinal feed. - Thread cutting shaft (Metric/Inch/Module/DP thread cutting possible. - Multifix type quick change tool holder. - 2-axis digital readout (Brand: Sino). - 3-jaw chuck Ø 315 mm, bore 100 mm (Camlock). - 4-jaw chuck Ø 400, bore 105 mm (Camlock). - Drive plate Ø 630 mm (Camlock). - Steady rest Ø 120- Ø 260 mm. - Follow rest Ø 20 – Ø80 mm. - Coolant device.

Condition: used, Saimp KS Iron Lathe. Bljdpjv Sth Hefx Ad Aer Max piece length 1000mm

Condition: new, Optimum OPTIdrill D 23Pro (400 V) special offer set bench drill 3003020SET With V-belt drive. TECHNICAL DATA Dimensions and weights Length (product) approx. 680mm Column diameter 73mm Width/depth (product) approx. 350mm Height (product) approx. 1015mm Weight (net) approx. 63.5kg Drilling capacity Drilling capacity steel (S235JR) 25mm Continuous drilling capacity steel (S235JR) 20mm Drilling table Drilling table work surface length 280mm Drilling table work surface width 245mm Drilling table T-slot size 12mm Drilling table rotation 360 Drilling table inclination 45° Distance spindle - drilling table max. 425mm Speed range Speed range 200 - 2440min¯¹ Number of speed ranges 12 Electrical data Drive motor power 0.75kW Supply voltage 400V Mains frequency 50Hz Machine base Distance spindle - machine base max. 618mm Machine foot working surface length 240mm Machine foot working surface width 250mm Machine foot T-slot size 16mm Machine foot T-slots quantity 2 Machine foot T-slot distance 170mm Spindle Quill stroke 80mm Spindle holder MK2 throat 180mm SCOPE OF DELIVERY Quick-action drill chuck 1 - 16 mm Morse taper MK 2/B16 T-nuts Machine vice BMP Blsdpfx Adot N Ivve Aor