Hot Foil Stamping Machine

TWQ-720RD Automatic Hot Foil Stamping Machine

Condition: excellent (used), Year of construction: 2003, Ref:11066 . 2003 Autobond105 THS. B1, single sided, fully automatic thermal laminator. Excellent condition run less than 1.5 million sheets! Equipped with; Heidelberg deep pile suction feeder with back separation 250mm (10) diameter highly polished chrome laminating roller Laminating nip pressure up to 6 metric tonnes Film is mounted on a quick change air shaft Trim slitter and perforating mechanism Pneumatic clutch ensures precise film tension Swiss made temperature control unit Sheeter - Integral bump roller separator with anti-curl bar Pallet delivery table. Accessories: Ioniser Pro static eliminator. Codpfxeydnxne Ac Norb Specification: Sheet size Max: 105 cm (40”) x 76 cm (30”) Min: A4 Paper weight 90 gsm (80lb) - 650 gsm (24 PT) Film Range - 8 micron virgin & 24 micron (1 mil) to 75 micron (3 mil) thermal Top speed 45m (150') per minute with rising pile feeder.

Condition: excellent (used), Year of construction: 2005, Our Polly Prestige 674+L machine for sale! Features: Year of manufacture: 2005 6 printing units and one varnishing unit Max paper size: 520 x 740 mm (B2) Number of impressions: 55 million Alcohol dampening Technotrans system High delivery and non-stop feeder Graficontrol (register, ink zone, dampening) Autoplate Washer (ink rollers) Grafix IR dryer Powder spray system Techkon densito connected to the control panel CIP 4 system Supplied with plate punch and bender The machine has not been in production for a year; according to my tests, the rubber rollers are in 60% condition. The cylinders are undamaged. Testing is possible; however, there is no longer staff or auxiliary materials for printing, so only a paper-feed test is available. The machine is located in Hungary. Crsdpfxoypardj Ac Nob

Year of construction: 2020, operating hours: 1,000 h, condition: used, functionality: fully functional, KAMA ProCut 76 Foil – Die-Cutting and Hot Foil Stamping Machine Model Year: 2020 | Only approx. 1,000 operating hours | High-end configuration | Made in Germany For sale is a KAMA ProCut 76 Foil from model year 2020 with only approx. 1,000 operating hours. The machine comes from our own production facility, is still in use, and can be inspected and tested under power by appointment. The KAMA ProCut 76 Foil is designed for premium die-cutting, embossing, and hot foil applications, making it ideal for demanding packaging, carton, and finishing operations. Equipment & Highlights • Only approx. 1,000 operating hours • Integrated hot foil stamping • Very high production output with excellent precision • Servo-driven feeder and transport table • Electronic double-sheet control • High level of automation and reproducible quality • Robust industrial construction “Made in Germany” • CE compliant • Industry 4.0-ready for remote maintenance and network integration • Machine currently in production Standard Features • Motorized die-cutting pressure adjustment (MPC) • 4+1 system with base plate and 1 set of 1-mm die-cutting counterplates  – 5× medium, 1× hard • 1 standard chase frame with fine adjustment for steel rule dies (full format) Csdpfx Acoyc Hmuj Nsrb • 3 pile trolleys for feeder and delivery • 4 additional pile trolleys • Servo-driven feeder and transport table • Electronic double-sheet control • 1 set of KAMA fastening elements • 1 set of mounting parts for 15° dies on KAMA carrier plate Special Equipment & Options • Integrated hot foil stamping  – Mobile frame with integrated heating system  – 4 or 6 heating zones  – Two foil pull motors  – Driven rewinder shaft  – Two tool carrier plates  – Foil saver software for foil optimization • KAMA AutoRegister  – Maximum register accuracy  – Especially suitable for digitally printed sheets • Pneumatic tool clamping (76 model only) • Die-cutting pressure display with overload protection • Universal chase frame • Chase frame rack • Vacuum pump and compressor • Servo main drive for asynchronous cycle  – Up to 50% higher machine speed  – Alternatively, extended contact time for hot foil stamping Technical Data • Machine type: KAMA ProCut 76 Foil • Model year: 2020 • Operating hours: approx. 1,000 h • Maximum sheet size: 760 × 600 mm • Minimum sheet size: 279 × 210 mm • Maximum die-cutting area: 743 × 585 mm • Production speed: up to 5,500 sheets/h • Die-cutting force: 165 tons (1.65 MN) • Gripper margin: 10 mm • Machine dimensions (L × W): 4.87 × 2.69 m Processable Materials • Paper from 100 g/m² • Cardboard up to 1,500 g/m² (approx. 1.8 mm) • Plastics such as PET, PP, and PVC Applications • Folding cartons and packaging • Hot foil stamping and finishing • High-quality carton and paper products • Digital print post-press with highest register requirements • Short-run and serial production The machine is being sold as it is now only rarely used in the current production environment.

Condition: good (used), Heidelberg Cylinder KSB 40×57 Hot Stamping Machine A very rare model on the market. The machine is ready for operation and in very good condition. After inspection. Factory-installed new hot stamping unit. Suitable for die-cutting. Central lubrication. Format 40x57cm Weight 3500kg 380V power supply Includes additional components, fillers, and letterpress locks. Csdpfx Aey Ah Iboc Norb

Year of construction: 2009, condition: used, MADAG DP H120 Hot Stamping Machine • Year of manufacture: 2009 • Pre-owned and fully functional machine • Manufacturer: MADAG (Model DP H120) • Application: Stamping Csdpfx Acjxy Ra Eo Njrb • Optional: Inspection and demonstration available upon request ___ Our General Terms and Conditions apply. The seller is not liable for typographical errors or data transmission mistakes. All information and images were provided by the owner and authorized for publication. The visual condition of the items corresponds to their age and the photos shown. The technical condition and wear of the items are in accordance with their age. Used machines are sold exclusively to commercial customers and without warranty.

Condition: excellent (used), Stacker Sakurai ST102H Crjdpfxjygmgcs Ac Nob

Condition: good (used), Drawer shelving, workshop drawer unit, tool cabinet – 9 drawers – large format, approximately 117 x 104 cm inside the drawer – each drawer has its own bearing. Made in Germany Cedpfx Acoy Ehkbe Norb