Pipe Welding System

Uhrhan & Schwill Außenschweißen

Condition: used, Year of construction: 1987, pressure / t stroke / mm table-size / mm weight of the machine ca. 65000 kg Make: Shepherd Type: SVRM 4-roller bending machine: Year of construction: 1986 Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest tube diameter with 360 mm roller: Ø 460 mm Kjdpjuddcaefx Ag Iodl Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Material SA- 738 B Material thickness: 35 mm conical bending: Except for the top roller, all rollers can be moved in an inclined position for conical bending. The roller positions can be read on display instruments. For semi-automatic or fully automatic operation of the machine, the bearing jewels of the rollers are equipped with scale bars and slide cams for limit switch actuation. This allows the rollers to return to the same set position over and over again, giving a very high level of uniformity in the shot wefts being bent.

Condition: used, Year of construction: 1983, Technical details: Pressure: 160 t throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250x630x100 mm passage opening in table: 4x Ø 62mm mm ram speed - forward: 200 mm/s ram speed - reverse: 125 mm/S ram surface area: 450 x 850 mm mortise hole in ram: Ø 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter Kodpfx Aou Nfvuog Iodl *

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, - saw blade, - 400V plug -16A- Kodshpktvopfx Ag Iodl The machine is delivered fully assembled and ready for immediate use.

Condition: new, Year of construction: 2026, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range Ksdeg U Uv Ropfx Ag Iedl 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: new, Band saw machine Make: METALLKRAFT Model: BMBS 300 x 320 HA-DG Art.no.: 3690041 Condition: New machine cutting range (round): 300 mm belt speed: 20-100 m/min, infinitely variable standard equipped with: - Fully hydraulic, semi-automatic version. after starting, the machine clamps automatically after the end of the cut, it returns to the starting position stops the saw band and opens the vice. - Cutting probe for automatic detection of material height - Horizontal vice, mechanical, hydraulic Kjdpfxeilg Hdo Ag Iodl - Monitoring of saw band tension, electromechanical - Chip clearing brush - Measuring stop with scale 1.000 mm - coolant device - Operating instructions

Condition: new, Model Name Kdedpfx Agogvquws Iel Shark 332-1 CCS

Condition: like new (used), Year of construction: 2022, 600 Kg load capacity welding rotary table adjustable in height with through hole 100 - 200mm plate diameter 700mm height horizontal min. 0,65m, max. 1,25m height tilted min. 0,45m, max. 0,95m speed from 0,01 - 1,1 rpm Kedpfxed Anz Rj Ag Isdl Tilt up to 135 hand and foot remote control with speed indicator very robust

Condition: new, Year of construction: 2023, Welding turntable, tank turning device 6000 Kg load capacity Kodpfok Adl Hox Ag Isdl Didital display with foot remote control diameter from 180mm to 3500 mm drive rollers diameter 300mm dimensions: length 1900mm x width 470mm x height 390mm Speed infinitely variable 200 - 1800 mm / min.

Condition: new, Year of construction: 2025, load capacity: 20,000 kg, 20 tons container turning device, roller stand, complete set 380 V, speed infinitely variable from 200 to 1000 mm /min. for diameters from 500mm to 4000mm Kjdpoifgu Usfx Ag Ijdl roller diameter 300mm x 140 mm temperature resistance of the support rollers 100° Double drive synkron AC motor, 380V 750 W with hand and foot remote control, complete set

Condition: new, Year of construction: 2025, Profile machine MZP-02 2m The MZP machine is used to corrugate sheets to ensure stiffness of thin sheets in the ventilation duct sector. Rolls made of high quality steel can roll 2mm aluminum sheets and 1.2mm black steel sheets. The machine is equipped with transport wheels that allow you to quickly change the location of the machine in the workshop. Machine Specs: Engine with editor Chain driven roller system Fully welded construction Transport possible thanks to the wheel The pressing force can be easily adjusted with the help of adjusting screws Adjustable intermediate distance between the upper and lower shafts The lower and upper rollers are made of hardened long-life steel A practical machine that can be used by people operating in the ventilation industry for many years. Kdsdsfwxm Djpfx Ag Iol Technical specification MZP-02 2000 Working length: 2000mm Range of processed sheets: 0.40 / 1.20mm Engine power: 0.37kW Length: 2240mm Width: 530mm Height: 1050mm Weight: 360 kg