Chuck flange

unbekannt Ø 250 mm

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck Gtodpjd Iuxhefx Abdet -Mouth size: Ø 250 mm -Passage: Ø 75 mm -Weight: 21.5 kg

Condition: used, turning diameter / mm turning length / mm swing diameter over bed slide / mm Technical data - Model 230 DIMENSIONS Centre height on the bed: 230 mm Spacing between centres: 1000-1500 mm 2000-2500 mm 3000 mm Bed width: 360 mm Largest turning Ø: on the bed: 465 mm on the carriage: 278 mm on fixed steady rest: 200 mm on travelling steady rest: 160 mm CROWNING Width of the crank: 300 mm Distance between face plate edge and offset: 150 mm Largest turning Ø on the offset: 690 mm SPINDLE Ø of front bearing (inside): 110 mm Ø of rear bearing (inside): 95 mm Ø of hole: 77 mm Mounting Type - Cam Lock: 6" Internal spindle taper - taper: 1 : 20 Spindle taper - C. M. - N.: 5 Speed ranges: Slow feed - rev. 1': 15÷1000 Normal feed - rev. 1': 22÷1500 Fast feed - rev. 1': 30÷2000 FEEDS (without gear change)-N.: 108 Longitudinal feed range at revs. : 0.04÷4 mm Transverse feed range at revolution: 0.02÷2 mm Lead screw - Ø: 40 mm Lead screw pitch: 12 mm THREAD (without gear change) Metric - N. 54 to: 0.5÷28 mm Module - N. 54 to Module: 0.25÷14 Whitworth - N. 54 to Wt. x 1": 56÷1 Diametral Pitch - N. 54 to D.P.: 112÷2 Inch - N. 54 to Inch: 1/32 ÷ 13 3/4" SPINDLE PIT Quill Ø: 75 mm Quill barrel: 220 mm Quill taper - vices N. 5 POWER Main motor - HP: 10 Pump motor - HP: 0.25 WEIGHT approx. - kg Gtsdpfx Abewz Rywodot 2000-2220 2530-2720 2920 ON REQUEST Main motor - HP

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 80 mm Gtodpfx Asd Iuxgsbdet -Weight: 19 kg

Condition: good (used), Chuck flange, flange mount, lathe chuck flange, drive flange Gsdpfof Ek Hiex Abdstt -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 250 mm -Inner diameter: 65 mm -Socket: Cone Ø 103 mm -Bolt circle: Ø 133 mm -Bolt circle: Ø 235/13 mm -Dimensions: Ø 250 x 100 mm -Weight: 13 kg

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Swing dia over bed 400 mm Swing dia over crosss slide 220 mm Between centers 1500 mm Spindle hole 50 mm Spindle speed 12,5 – 3150 rpm Spindle power 5,5 kW Power required 16 kVA Dimensions L x W x H = 2900 x 1000 x 2200 mm Weight cca 1600 kgs Accessories, features - 3 jaws chuck, D200 mm chuck - 4-fold tool holder - Tailstock - Display motor load - Rapid speed - Driwing system by clutch - Spindle break - Splash wall - Hardened and ground linear guides are in perfect condition - Steady rest - Coolant unit - Manual The machine is in great and original technical condition. It was barely used. No DRO system on it. Gtedpfxsxiymte Abdst

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck Gsdped It Idofx Abdett -Mouth size: Ø 250 mm -Passage: Ø 75 mm -Short cones: 6 -Recess: Ø 194 mm -Weight: 29.5 kg

Condition: excellent (used), Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 40 mm -Transport width: 250 mm -Receiver: single-sided, ball-bearing mounted (see photos) Gtjdexyf N Iopfx Abdet -Number: 8x transport wheels available -Price: per piece -Dimensions: 395/70/H70 mm -Weight: 3.2 kg/pc.

Condition: ready for operation (used), Facing lathe DP 2000 Chuck diameter 2000 mm Gtodpov Hx R Nofx Abdjt Length 3500 mm weight approx. 22 tons

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Chuck flange for: driving heart, three-jaw chuck, four-jaw chuck, face plate Godpfx Aewc Rvzjbdott -Outside: Ø 250 mm -Adapter: short cone size 8 (Ø135-139 mm) -Bolt circle: Ø 170 mm -Dimensions: Ø 250 x 175 mm -Weight: 14.1 kg

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 250 mm -Short taper flange for: bayonet disk mounting DIN 55027 -Cone size: 6 Godpfod Hcrcox Abdott -Hole circle: Ø 133.4 mm -Weight: 7 kg

Condition: used, used three-jaw chuck chuck flange with morse taper for mounting in tailstock or hollow spindle Gtodpfx Abobnwrmodst Chuck Ø: 240 mm Morse taper size: 6

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Throughout: Ø 70 mm Gsdpfx Abod Iuxysdjtt -Weight: 27.5 kg

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 250 mm -Hole circle: Ø 225/Ø 14 mm -Dimensions: Ø 250/H45 mm Gtedpfx Aed N Uy Hsbdjt -Weight: 9.4 kg

Condition: good (used), overall weight: 1,200 kg, Machine equipment as required available for an additional charge – almost anything is possible. We specialize in retrofitting Jungner machines. Gtodpfjtwpyyex Abdst

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: chuck size Ø 250 mm -Passage: Ø 80 mm Gsdjt Sz Ikjpfx Abdjtt -Clamping plate: Ø 305/60 mm -Bolt circle: Ø 280 mm -Weight: 37 kg