Chamber tempering furnace

VEI VEI_KA_GB

Year of construction: 2022, operating hours: 0 h, condition: new, Mobile cleaning centrifuge including buffer storage for dirty water, agitator and double membrane compressed air pump. - new machine - numerous other variants and special designs on request Machine type: Process water centrifuge solid-liquid Manufacturer: Eurotec Innovation GmbH Model: ZS21-M EUR Application: vibratory finishing technology, general solid-liquid separation, cooling lubricant processing, wet blasting systems, ... Benefits: - High discharge through acceleration forces acting in the system of over 1800 times the acceleration of gravity - Management of the process water in a circuit, which minimizes operating costs and protects the environment - Saving of expensive additives for the vibratory grinding process (compound) - Economical and efficient separation of solid particles from a mixture - Economical and efficient separation of solid particles from a mixture - Suitable for process liquids up to 70 ° C (optional cooling available) - frequency-controlled motor drive for smooth acceleration and braking of the rotor Are you looking for innovative solutions for surface treatment and process water treatment? We offer a wide range of systems in the field of vibratory grinding, drying and process water technology, which are precisely tailored to your application. From development to production: We deliver all of our products from a single source and everything is "Made in Germany". ----- Please just contact us, we will be happy to advise you without obligation. ----- Gjdpfxjf Sqfqo Aadsin The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded.

Condition: ready for operation (used), Year of construction: 2011, A Jumag steam generator including a Weishaupt burner is available. 1) Jumag DG 360 rapid steam generator, year of manufacture: 2011, volume: 60l, test pressure: 12bar, max. operating pressure: 13bar, max. temperature: 220°C, max. firing capacity: 245kW. 2) Weishaupt WM-G10/1-A Monarch burner, year of manufacture: 2011, capacity range: 65kW-310kW, connection pressure range: 15mbar/500mbar, gas type: bio. The system was in operation for only 3 years. Documentation available. An on-site inspection is possible. Gisdpjxd Au Asfx Aaden

Condition: used, CNC flame cutting machine BACH type ACW 2500 Flame cutting machine with CNC control NBS 400 Machine. No. 14 561-06 Year of construction 2006 Cutting area 2500 x 6500 mm track length 8000 mm Track width 3345 mm Track height 650 mm 2x machine cutting torch Gjdpfx Aajf Ncadsdjin with cutting table

Condition: new, Bernardo horizontal bandsaw HBS 275-400 V Technical specifications Cutting capacity round 90 ° and 225 mm Cutting capacity 90 ° 200 x 200 mm square Section flat 90 ° 245 x 150 mm Cutting area around 45° 160 mm Section square 45 ° 160 x 160 mm Cutting area around 60 ° 100 mm Cutting range, square 60 ° 100 x 100 mm Working height 910 mm Band saw blade dimensions 2480 x 27 x 0,9 mm Cutting speeds of 400 V 45 / 90 m / min Coolant pump S1 100% 100 W S1 motor power output 100% 1,1 kW Motor power S6 40% 1,5 kW Voltage 400 V Machine dimensions (L x D x H) 1430 x 720 x 1700 mm Weight approx. 190 kg Gisdpfed Du T Iox Aadsn Scope of delivery • Band saw blade • Workpiece stop • Base • Belt tension gauge • Vise with quick locking • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Year of construction: 2010, condition: excellent (used), Chamber inside 2000 x 1250 x 1250 mm Volume inside 2344 Liter Up to 400 Gr/C (Power 33kW)   Preheating / Drying For manual, cycle and CNC processing up to interactive contour programmingCovered guidance tracks (DGP) for high long-term precisionDirect drive from motor to main spindle for high running smoothnessOil recirculating lubrication unit with filtering for the lubrication of the precision main spindle bearingCombination control unit for economically advantageous programming and machine operation, as well as optimum access to the work area Gijdpeuqkwfjfx Aadsn Length:2500mm Width:2015mm Height:2900mm Weight:4000kg

Condition: used, Year of construction: 2007, x-axis 10.100 (2x 5.000) mm y-axis 3.000 mm z-axis 1.500 mm Control Sinumerik 840 D Siemens distance between columns max. 3.000 mm passage max. 1.950 mm distance spindle center to table max. 1.800 mm distance spindle nose and table 1.350 / 1.500 mm type P 8005020/00-4 turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 20 kW max. Torque 48 Nm tool taper HSK-A63 DIN 69063 Spindle Extension 450 mm swivellable B: +110° / -10 ° rotatable C: +/- 200 ° type P 8002320/00-4 turning speed range - main spindle 20 - 5.000 min/-1 power capacity - main spindel 40 kW max. Torque 1.100 Nm tool taper HSK-A100 DIN 69063 Spindle Extension 300 mm swivellable B: +110° / -10 ° rotatable C: +/- 200 ° table surface area 4.000 x 2.200 (2x) mm max. table load 12 / 20 t height over floor 700 mm number of T-slots 11 + 19 T-slot - width 28H7 mm T-slot - distance 200 mm number of toolpositions 327 pos. number of toolpositions HSK A63: 156 pos. number of toolpositions HSK A100: 171 pos. max. tool diameter HSK A63: 52 mm max. tool length HSK A63: 250 / 500 mm max. tool weight HSK A63: 5,0 kg max. tool diameter HSK A100: 315 mm Godpfx Ajvy Ihdoadein max. tool length HSK A100: 500 / 800 mm max. tool weight HSK A100: 40,0 kg feed speeds X: max. 30.000 mm/min feed speeds Y/Z: max. 40.000 mm/min feed speeds B: 3.600 °/min feed speeds C: 2.160 °/min Accelaration X: max. 1,5 m/s² Accelaration Y/Z: max. 3,2 m/s² x-axis 10.100 (2x 5.000) mm y-axis 3.000 mm z-axis 1.500 mm b-axis +110° / -10 ° c-axis +/- 200 ° total power requirement 150 kVA dimensions of the machine ca. 25,0 x 12,0 x 7,0 m 5-Axis Gantry-Big-Machining-Center DROOP + REIN - TFS 22 40 DT D40 P - two Milling-Heads - ca. 4.000 Power On Hours - X-Achse 10.000mm (coupled) / 2x 5.000mm (single-table) - 3 axes simultaneously (X, Y, Z) - 2 positioning axes (B, C) - tools upon request

Condition: excellent (used), Year of construction: 2004, WIRE BELT BLAST MACHINE MANUFACTURER: RÖSLER WIRE BELT BLAST MACHINE BRAND: RÖSLER Manufacturer: Rösler Type: RDGE 800-4 Year of manufacture: 2004 Passage width: 800mm Passage height: 550mm Spinning wheel: 4 pieces with frequency converter, Filter system: wet filter system With several inlet and outlet belts. Incl., control cabinet, complete documentation, etc. TOP condition! System is dismantled! WIRE BELT BLAST MACHINE BRAND : RÖSLER Brand: Rösler Type: RDGE 800-4 Year: 2004 Belt Width : 800mm Inlethigh: 550mm Turbine: 4 Pieces with Drivers Filter: Wet Filter With many inlet- and outlet transport belt Incld. Main Panel, complete Doku Very good condition! Machine it s now desmantly Price: Loading on Truck Price: Loading on Truck Warranty: 6-month function and warranty guarantee when commissioned by DECK Sarl. Spare parts supply for the next 10 years Warranty: 6-month Functions- and warranty from DECK Sarl. When DECK Sarl. make the assembly OPTIONAL: Delivery to your factory: Assembly / commissioning / training Gsdpfxsv Idf Ie Aadein Assembly by foreman We also offer spare parts for Rösler, Schlick, Wheelabrator, Gietart etc. blasting machines! We can offert for spare parts for Rösler, Shot Blasting Machines!

Condition: ready for operation (used), Year of construction: 2002, Speed: 4500rpm, max. bowl diameter: 300mm/167mm, solids: 2.6kg/dm³, material temperature min./max.: 5°C/100°C, bowl dimensions X/Y: 300mm/1200mm, machine material: stainless steel, operating hours: 62293h. Including spare parts. On-site inspection is possible. Godpfsu Av H Dox Aadoin

Year of construction: 2009, condition: reconditioned (used), machine/vehicle number: FARO-PT08, Faro Platinum Arm in top conditionArm 7 axis, length 8ft (appx. 2,4m) Accuracy 30/43µm Last calibration 2012 incl. very new Aberlink 3D software (free updates) Windows 10 HP notebook (used) on demand Inca Premium software (+ € 4.000,--) Gsdpfx Aolwktpoadoin or other application (Polywork, PcDmis, MComos.) On demand we can deliver a granit plate with 1500x1000mm. Softwaretraining possible

Condition: new, Year of construction: 2025, total length: 1,600 mm, total width: 2,200 mm, total height: 2,350 mm, overall weight: 250 kg, type of input current: three-phase, working width: 1,400 mm, Paint booth, paint wall, suction TQN1414 Gisdpfx Aod S N I Noadon With right or left side discharge. Working dimensions (mm): 1400 (width) x 1400 (height) x 800 (depth) Overall dimensions (mm): 1600 (width) x 2350 (height) x 1250 depth SPECIFICATION: • Fan power 1.5 kW, • Efficiency 6,500 m³/h, • 2 x 100% polyester filter • Filtration degree at the level of 99.9%, • Control panel IP 66, • Automatic filter cleaning • Hermetic lighting IP 65. • Paint tank Cabin available immediately (Stock status) SELECT BUMEX SP. Z O.O. Very high quality machines among those offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our customers. All BUMEX SP. Z O.O. brand products have an EC certificate. We offer our own transport - prices are set each time, for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please contact us.