Sharpening machine

Vollmer CHC 260

Condition: used, Year of construction: 2010, Suitable for automatic grinding of tooth faces, tooth backs, and bases on carbide-tipped circular saw blades in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be ground automatically and in a single pass. Accessories: Full enclosure Measuring probe Grinding device with oil cooling Automatic fire extinguishing system Grinding mist extraction system N 183 Alphanumeric keypad Oil drip tray Machine light Giedpswp Eblofx Adbsp saw diameter: 80-840 mm Bore diameter: from 10 mm sheet thickness: < 8 mm Tooth pitch: 6 - 120 mm Cutting length:

Year of construction: 2008, condition: used, functionality: fully functional, Unit was used for grinding oil cleaning for carbide machining. Godelczcwspfx Adboip Eckert cooling unit 3 filter towers with sludge bag Filter capacity 80-100 l/min. Filter fineness 3-5 µm In the description the unit is described with sludge drum, technical data are similar. Original instructions available in paper form Videos available on request.

Year of construction: 2019, condition: ready for operation (used), An industrial knife grinding machine MVM for sharpening woodworking parts is available. Knife length: 6000mm, control: Siemens PLC with remote control. Includes an extraction system, a magnetic table, and a chip filter. Documentation available. An on-site inspection is possible. Giodpew I E Eajfx Adbsp

Year of construction: 1991, condition: ready for operation (used), Axes: 5, max. grinding wheel diameter: 150mm, spindle speed: 9000rpm, workpiece spindle speed: 1500rpm, clamping spindle speed: 13000rpm, travel X/Y/Z: 200mm/190mm/150mm, tool holder: HSK-50, machine dimensions X/Y/Z: approx. 1700mm/1400mm/1800mm, control: NumRoto 1060, control defective. Including coolant pump and coolant tank, grinding wheel set with 12x holders. Documentation available. On-site inspection is possible. Godpfevu Dfbox Adbjip

Condition: reconditioned (used), Year of construction: 2005, operating hours: 6,000 h, functionality: fully functional, saw blade diameter: 810 mm, grinding wheel diameter: 125 mm, CHP250 is an automatic machine for grinding the complete tooth geometry of carbide-tipped circular saw blades. Godpfx Ajykmxtodbeip Version with two CNC axes and a full enclosure. Technical specifications: Circular saws Outer diameter: 80 to 810 mm Bore diameter: 10 to 220 mm Blade thickness: up to 8 mm Tooth pitch: 6 to 120 mm Rake angle: -30° to +50° Clearance angle: 5° to 45° Tooth height difference: up to 3 mm Back rake bevel: up to 45° Face bevel: up to 15° Grinding path: up to 20 mm Grinding wheel diameter: 125 mm CHP250 On the CHP250, two CNC axes control the bevel grinding and the infeed of the grinding wheel. This is a prerequisite for grinding any tooth geometry on the front (face) or back (flank) of the tooth in a single pass. Central lubrication and exhaust system are included. For effective coolant (oil or emulsion) cleaning, a Seitz-brand band filter system from 2010 is included. Up to 3 machines can be connected to the unit. The base is made of stainless steel. The condition is very good.

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, Drying chamber Make: Mühlböck Type: ZLSM Year of construction: 2003 Internal dimensions approx. 7400 x 4500 x 4250 mm (LxWxH) 3 fans each 3 kW Giedpfx Adjwr Tzfobsp 10 measuring points With frequency converter With control system Heating power 223 kW Water temperature 85 °C Water quantity 14 m³/h Voltage 230/400 Volt Connected load 12 kW Fans 3 x 3 kW Control program MB Intellevent 5000

Condition: good (used), Back off carbide saw grinder VOLLMER model NS700 Gsdpfogqalcjx Adbjip

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, saw blade diameter: 650 mm, Central suction needed, with oil cooling Gjdpfxjymlrds Adbsip

Condition: good (used), Grinding diameter 3-40mm Length of drill unlimited Point angle 40-180mm Point thinning device Gijdpfx Adsgy Ti Dobep Dressing attachment MARCELS MASCHINEN CH

Condition: like new (used), functionality: fully functional, 1 as-new high-performance knife grinding machine MVM KX 250 – 2100 mm (ex-demonstration unit) * 1-year warranty • Siemens touch screen PLC (control system, spare parts supply guaranteed by MVM) • Grinding wheel motor 15 kW, 20 HP, 400V, 3-phase, 50 Hz • Grinding wheel diameter: 250 mm • Magnetic rotary table, adjustable from 0 to 90 degrees • Magnetic table width: 150 mm • Magnetic table length: 2100 mm • Vernier indexer for magnetic table rotation +/- 90° • Controls for rapid or slow downfeed of the grinding wheel • Automatic feed controlled by Siemens PLC (0.001 – 0.1 mm) • Fully automatic work cycle (rough grinding, fine grinding, sparking out) • Variable carriage speed: 1 – 30 m/min • Automatic lubrication of PTFE slideways • Coolant injection at center of the grinding wheel plus 2 further nozzles on each side • External coolant tank with pump • Magnetic separator with discs for coolant cleaning • Motorized quick-change flange for fast tool changeover • Variable grinding wheel speed (adjustable to blade, machining phase [roughing, finishing, sparking out], and blade wear) • Automatic approach to workpiece (HSS) • LED lighting • Dimensions: 4.12 x 1.50 x 1.75 m Gedpfx Adsx Nhnheboip • 1-year warranty