Round table

Walter Rts 400 G

Condition: used, Year of construction: 2002, Technical details: x-travel: 505 mm y-travel: 405 mm z-travel: 405 mm measuring range X-axis: 505 mm measuring range Y-axis: 405 mm measuring range Z-axis: 405 mm compressed air: 0,4 MPa voltage: 100/120/220/240 V / Hz total power requirement: 700 Watt machine weight approx.: 0,5 t dimension machine xH: 1,1 x 1,1 x 2,185 m further features: -it is a linear measuring system with resolution 0.0001mm -measuring speed X/Y+Z-axes 430 mm/s Bwodpfxsu S Izce Al Aeu -acceleration X/Y+Z-axes 980 mm/s² -measuring table made of granite, size LxW: 638 x 860mm, with workpiece clamp -max. tool size height max. 545mm weight max. 180kg Equipment: -Measuring probe Renishaw TP200 -Computer Fujtsu - Siemens Scenic P; protection class IP30 -without measuring probe -Software available (USB Stick) *

Year of construction: 2007, condition: ready for operation (used), Turning diameter: 430mm, max. swing diameter over bed: 760mm, max. turning length: 860mm, center distance: 990mm, travel X/Y: 280mm/860mm, speed: 3400rpm, chuck diameter: 12inch, tool stations: 12. Machine dimensions X/Y/Z: approx. 3800mm/2000mm/1900mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible. Bodpsy Hvp Isfx Al Aewu

Condition: excellent (used), Year of construction: 2002, Control: 3-axis active path control, Heidenhain TNC 123 Spindle speed: 40 - 2000 rpm, geometrically stepped direct drive with 16 gear stages for maximum torque / milling performance Feed rate: 5 to 500 mm/min, infinitely variable Rapid traverse: 1.2 m/min Quill: Extendable vertical quill, 60 mm, SK40 M16 draw thread Axes X/Y/Z: 300/160/340 mm Swivel table: 600 x 210 mm, max. load 200 kg Bwsdpfxsyg I Nfs Al Aou

Condition: refurbished (used), Year of construction: 1988, Graver grinding machine Make: Maschinenfabrik Baden-Baden Model: FSS Year of manufacture: 1985 - overhauled, repainted RAL7012 basalt gray, RAL 7035 light gray Machine no.: 2992 Bwedetqdqgjpfx Al Asu Warranty: 12 months single layer from delivery, on the mechanics overhauled by us. The electrics and electronics are excluded, as they have only undergone a functional test. For machines located outside our northern Bavarian sales area, travel costs are to be borne by the customer. Accessories: - Grinding wheel with flange - Operating instructions incl. new electrics On/off switch in new housing with undervoltage coil to realize the restart protection z. e.g. in the event of a power failure or if the mains plug is pulled out Used as seen The machine corresponds technically the state of the year of manufacture at that time.

Condition: as good as new (ex-display), Year of construction: 2026, The CE08 series is an electrically powered high-pressure cleaner. This model is the ideal tool for general cleaning tasks. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotary nozzles, chemical injectors, and a sandblasting kit. It is similar to, but not a Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE08-series L/min CE08-200 bar 15 7.5 hp water blaster unit 50Hz CE08-200 bar 15 7.5 hp water blaster unit 60Hz CE08-200 bar 15 7.5 hp water blaster unit 50Hz with start/stop CE08-200 bar 15 7.5 hp water blaster unit 60Hz with start/stop Bsdpfjhf Nakox Al Ajwu General specifications: ----- Drive motor power: 6.0 kW Volt: 400V (50Hz) - 440V (60Hz) Amp: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

Condition: excellent (used), Year of construction: 1999, 1,0 St. gebr. Spritzgießmaschine Hersteller: DR. BOY Typ: 22 D Bjdpozaqzdofx Al Aswu Baujahr: 1999 Schließkraft: 22 Tonnen Holmabstand: 254 x 254 mm Einbauhöhe MIN, / MAX. 200 / 400 mm Schnecken DN: 22 mm Spritzteilgewicht 27 g/PS

Condition: excellent (used), Four-jaw chuck make Röhm diameter 315 mm single adjustable jaws bolt circle 120 mm Bsdpfepk A A Hex Al Ajwu

Condition: used, Year of construction: 2006, turning diameter Ø30/300mm mm turning length 3055mm +/-0.3mm mm weight of the machine ca. 4-6 t Bwsdpfxeugnxds Al Aju

Condition: good (used), functionality: fully functional, used 3D coordinate measuring machine Mitutoyo Euro C Apex 544 On our marketplace, we offer a pre-owned Mitutoyo Euro C Apex 544 3D coordinate measuring machine that retains impressive reliability and measurement accuracy despite its older age. This machine has been extensively inspected and tested by our experts to ensure that it still meets the high standards of metrology. Bedpsuyiu Njfx Al Aowu The Euro C Apex 544's precise measurements, robust construction and durable components make it an excellent choice for quality control in manufacturing today. It has been thoroughly calibrated and tested by us so that it is ready for use in your production. Technical data: Measuring range: X = 500 mm, Y = 400 mm, Z = 400 mm Manufacturer accuracy: ±2.9 µm + 0.3L/100 µm Drive: CNC-controlled, with fully automated measuring sequences Touch probe: Renishaw TP200 Software: Mitutoyo MCOSMOS Advantages: Proven reliability: this used machine has been thoroughly inspected, tested and calibrated by our metrology specialists to ensure continued precise performance. Stable precision: Thanks to its granite construction and proven Mitutoyo design, the machine delivers highly accurate and repeatable measurements even after years of use. Automation and efficiency: The CNC control and Renishaw TP200 touch probe enable fully automated, efficient measurements, optimizing your production processes. Reliable investment: Even as a used machine, the Mitutoyo Euro C Apex 544 offers a cost-effective solution for companies looking for a tried and tested 3D coordinate measuring machine. This machine is the perfect choice for companies looking for a proven and tested quality control solution. Despite its age, it has been extensively tested and calibrated to ensure maximum reliability and precision in your production.

Condition: used, Year of construction: 1990, x-travel 400 mm y-travel 250 mm workpiece height mm Control CNC 314 ELESTA total power requirement 15 kW weight of the machine ca. 5500 kg dimensions of the machine ca. m H A U S E R (Switzerland) CNC - Controlled High Precision Jig Grinding Machine Model S 3 – CNC 314 Year approx.. 1990 S/N 32086 _____ Bwedet Hxcnepfx Al Aeu Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 12.000 mm/min Vertical distance between table and grinding spindle, max. 0 – 485 mm Distance between grinding spindle and column 350 mm Conical grinding, up to max. 16 ° Grinding Ø bore approx. 230 mm Planetary speeds (C-Axis) 5 – 250 rpm U Axis, radial infeed 6 mm Total electrical load, approx. 15 kW - 400 V - 50 Hz Weight/Total weight approx. 4.000/5.500 kg Accessories / Special Features: • CNC Continuous Path Control, Model CNC 314, (ELESTA-POLESTA II) with new monitor,for 4 axes (XYC+U) in 2 1/2 dimension (XY+C) Interpolation with a free and easy programming for Linear and circle interpolation. Direct Input of data on keyboard, also loading data on RS 232 connection. There is also a handwheel control device for setting – up purposes. Manual feed correction during the working cycle possible. • Digital Read-out for the Z-Axis, Z-Axis as high speed stroke, also good for blind holes. • W Axis for vertical positioning of grinding head slide, • U Axis for the infeed cycles during bore grinding, grinds different bore-Ø automatically. • C Axis Feed for the of the Planetary Head, grinds radii and contours • 2 grinding motors HAUSER approx.. 22.500 to 60.000 rpm, with some collets and arbors • Built-on Acoustic Grinding Contact Display Device Model KSV 5. • Separate coolant unit with band filter. * Built-on fire extinguishing system. • Separate switch cabinet and control unit, Separate hydraulic unit with oilchiller, • Central lubrication, service tools, collets and grinding arbors/tools. Condition : Very good - Machine can be inspected under power commissioned by a Specialist. Delivery : Ex stock - as inspected under power. Payment : Net, after conclusion of contract