Tool presetter

WEINIG Dimter Opticontrol

Condition: good (used), Year of construction: 1994, 2 side planer top - bottom constant table ( always same infeed height ) max. planing width 600 mm max. planing height 280 mm Rsdpfx Aehuthyskhecb planing shafts with strip knives immediately ready for use

Condition: excellent (used), Year of construction: 2018, Weinig Powermat 700 Year of manufacture: 2018 Planing width: 230 mm Planing height: 160 mm Infeed table: 2,500 mm Feed speed: 40 m/min Feed motor: 7 kW Table treatment: Marathon coating (hardened, excluding infeed table and special plates) Driven roller in table with width 200 mm Memory Plus system for 500 profiles Spindle arrangement Bottom: 11 kW Right: 7.5 kW Left: 7.5 kW Top: 11 kW Top: 11 kW Bottom: 11 kW Redpfxeyg Hflj Akhecb Machine is in very good condition

Year of construction: 1995, condition: excellent (used), The line consists of the following components: 1) Weinig Profimat 23 milling machine 2) Band Feeder KOCH -T-100-B (250x4550) 3) Weinig Uniplan milling machine 4) Band Feeder KOCH T-100-B (250x7050) 5) Tenoning machine KOCH SF -3 5a) Bottom feeding belt for waste (at tenoning machine 300x6050) 5b) Side feeding belt for wastes (at tenoning machine 300x1800) 6) Belt feeder KOCH T-100-B (250x5020) 7) Belt feeder KOCH T-100-A (300x3050) 8) Belt feeder KOCH T-100-B (300x3500) 9) Band feeder KOCH T-100-B (300x4530) 10) Weinig U2G milling machine 11) Feeding belt KOCH (250x4050) Line worked very few hours, is like new. Rcjdpohm Exdofx Akhob Year of production machines included in the line is 1995. In addition, for each machine I add a set of Leitz cutters for the window with a profile of euro 68. The cost of a new line is currently more than 1 million euros.

Condition: excellent (used), functionality: fully functional, Weinig Profimat 23 Fortec four-sided planer Working width 230mm Working height 140mm Number of spindles 6 Arrangement of spindles Bottom 7.5kw Right Left 11kw Top 7.5kw Top 5.5kw Bottom 5.5kw Pneumatic pressures Feed speed adjustable on variator Rcsdsumxqropfx Akhob Drive on cardan shafts CE certificate

Condition: reconditioned (used), Year of construction: 2004, AUTOMATIC WINDMILL PRESS WITH MECHANICAL LOCKING AND FEEDING AFTER A COMPLETE RENOVATION Redslnanwspfx Akhocb

Condition: excellent (used), functionality: fully functional, FOUR-SIDED PLANER – 6 HEADS WEINIG Rjdpfx Akjw T U Axehjcb Type: U23 6 HEADS 1 horizontal lower head, 7.5 kW 1 vertical right head, 7.5 kW 1 vertical left head, 7.5 kW 1 vertical right head, 7.5 kW 1 horizontal upper head, 15 kW 1 horizontal lower head, 7.5 kW Infeed table: size 1970 x 260 mm Feed rate: 6 - 36 m/min Infinitely adjustable Roller feed drive x 2 RIBBED TABLE Pneumatic pressure Table length: 1710 mm VERY GOOD TECHNICAL CONDITION

Year of construction: 1984, condition: excellent (used), Blade diameter: 550 mm Minimum cutting length: 500mm Minimum cutting width: 100mm Maximum cutting height: 160 mm Rsdpolrtntefx Akhecb Minimum cutting height: 40mm Pneumatic clamps

Condition: excellent (used), Chipper KLOCKNER HZM 1/400x100 with vibrochute – German production Rodpfx Aeiwi H Rjkhjcb – year of production 1992 – six pulling rollers – autoreverse TECHNICAL PARAMETERS: inlet width 400 mm inlet height 100 mm engine power 30 kW sieve 50 x 60 mm feed motor power 2 x 4 kW vibrochute 4900 mm two knives rotor diameter 400 mm autoreverse three top pulling toothed shafts three lower pulling toothed shafts transport dimensions (length/width/height) 500 / 230 / 150 cm weight 2500 kg

Condition: used, Number of boring spindles 6 St. Working width 230 mm Working height 160 mm Length of the planing table 2.500 mm Rsdpfx Asv Ec Ntekhocb Feed motor 5,5 kW

Year of construction: 2003, condition: used, Technical data: - Manufacturer: Weinig - Type: Unimat Super 4 - Year of manufacture: 2003 - Working width: 25 - 150 mm - Working height: 15 - 50 mm- Shaft arrangement: Spindle 1 below: Planing and milling the guide groove 125x40x40 mm, Z=2 125x120x40 mm, Z=2 Spindle 2 above: Combination tool consisting of special planing head with guide groove and 2 flat milling cutters. Precise thickness planing and flat milling of the gluing surfaces on the right and left. Face milling cutter on the right: 240x17x40mm, Z=8 Special planing head: 125x240x40mm, Z=4 Face milling cutter on the left: 240x80x122mm, Z=8 Tool flight circles 125 and 250mm Spindle 3 below: Removing the guide groove and finish planing. 125x170x40mm, Z=4 - Spindle 1: 11 KW - Spindle 2: 18.5 KW - Spindle 3: 5.5 KW - Feed engine: 2.2 KW - Feedspeed: 5-20 m/min. - Speed spindle 1 and 3: 6.000 rpm. - Speed spindle 2: 7.000 rpm. - Transport rollers D (hardened): 140 mm - Length of infeed table: 2.000 mm - Hardened machine tables Rcsdpeyatffjfx Akhjb - Guide groove in machine table - Suction nozzles 2x140 mm, 1x160 mm - Volume flow: approx. 5,500 m³/h - Volts/Hz: 400/50 - Location: Blomberg warehouse from 01/2026