Weinig Profimat four-sided planer

WEINIG Profimat 23

Condition: used, Working width: 230 mm Working height: 120 mm Spindles: 5 Spindle 1: Bottom / 5.5 kW / 40 mm Spindle 2: Right / 5.5 kW / 40 mm Codpfx Ahsx Ecguo Hogn Spindle 3: Left / common motor with #2 / 40 mm Spindle 4: Top / 7.5 kW / 40 mm Spindle 5: Bottom / 4 kW / 40 mm Weinig Profimat 23 E four-sided planer and moulder for planing and profiling timber on all four sides, equipped with mobile spindle.

Condition: used, Planer profiling milling machine WEINIG Profimat 26 Super Working width 20 - 230 mm (260) Working height 8 - 120 mm (140) 5 working spindles Ø 40 mm Long infeed table (approx. 2000 mm) Bottom working spindle 4 kW / left + right 7.5 kW / top 5.5 kW / bottom finishing 5.5 kW Pneumatic pressure of feed rollers Cardan feed infinitely variable 5 - 24 m/min Feed roller before jointer Control - push button operation automatic lubricant pump mechanical digital displays Machine in CE design Year of manufacture 2001 Without machining tools Machine is WORKSHOP OVERHAULED in GOOD CONDITION Machine is connected and ready for demonstration in exhibition center Ex stock Lieboch Cgodpfxowqda Nj Ah Hjn

Condition: used, Number of boring spindles 5 St. Cgedexu H R Aepfx Ah Hon

Condition: used, Planer table length: 2,000 mm Working width: 230 mm Working height: 120 mm Spindle 1: Bottom Spindle 2: Right Spindle 3: Left Spindle 4: Right Spindle 5: Top Codpjw I A Sqofx Ah Hogn Spindle 6: Bottom Number of spindles: 6 Control: ATS Weinig Profimat 23 planer and moulder for four-sided planing and profiling with ATS system.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Fully working UniControl 12 year 2006 from Norway - for exact technical specification please open attached document in PDF below. Cross section UniTec 12: - saw unit Csdpfx Ahsmgc I No Hsgn - edge round cutter from bottom - Hubspindel no.1 - Hubspindel no.2 - Hubspindel no.3 Long , profile section UniVar 12: - Profil cutter - Profil cutter - Profil cutter horizontal - Profil cutter - Profil cutter - Profil cutter Total el power 114 kw 400 V AC Need for suction 270 m3/min Need of compressed air 1000 L/ minMachine was in use until 15.08.2023 Payment: Prior to loading Delivery: ex. factory Rendalen - Norway Machine is located in Norway ( near to Trondheim) The machine is now disconnected, stored in dry and warm wearhouse, and are ready to be shipped. Rekman Maskin & Service - service of woodworking machines since 1986.

Condition: used, Four-side planer Weinig Profimat 23 Max planing width: 230 mm Max planing height: 120 mm Codpfx Ahsygwxcs Hegn 5 heads Fully adjustable heads 40 mm diameter spindles Feed via cardan shafts with stepless adjustment Robust planer by WEINIG, Machine inspected and ready for testing

Condition: excellent (used), Profimat. Opportunity from a Swiss operation in well-maintained condition, 5 spindles 230/120. 5th spindle below, profiling possible on all spindles. Cgodpfx Ajycwkqoh Hjn

Condition: good (used), Year of construction: 1996, Weinig Unimat 23 four-side planer - German production - grooved top - year of production 1996 - pulling rollers in the table top TECHNICAL PARAMETERS: planed width 230 mm planing height 160 mm grooved top spindle diameter 40 mm 1 lower spindle 7.5 kW Cgsdpfxsh Dwl De Ah Hen 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 11 kW 5 lower spindle 7.5 kW feed smoothly adjustable 6-36 m / min 5.5 kW feed motor power six top steel pulling rollers two upper rubber pulling rollers three pullers in the table top pneumatic feed pressure pneumatic shoe clamp spindles with brakes pre-table length 1970 mm electric height adjustment central lubrication (split) diameter of nozzles 140 mm dimensions of the machine (length / width / height) 410/200/180 cm weight ~ 3000 kg

Condition: good (used), functionality: fully functional, working width: 260 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 260 mm, working height: 170 mm, power of feed motor: 4,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, shaft diameter: 40 mm, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Profimat 23 E Working width: 260 mm, Working height: 170 mm, 5 spindles, Spindle diameter: 40 mm, Spindle configuration: 1- Bottom - 5.5 kW 2- Right + 3- Left - 11 kW 4- Top - 5.5 kW 5- Bottom - 11 kW Feed speed: 6 – 24 m/min - 4 kW Air cushion in the table Cgjdpfeyc Nubjx Ah Hsn One powered roller in the table at the outfeed. Comes with tooling.

Condition: excellent (used), Year of construction: 1995, Weinig Profimat 23E four side planer - German production - year of production 1995 - right and left spindles with a face milling cutter ensuring parallelism and a right angle of 900 - element width measurement - electronic width adjustment TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm electronic planing width control 1 lower spindle 4 kW 2 right spindle 4 kW 3 left spindle 4.2 kW (face milling) 4 spindle right 4.2 kW (face milling) 5 upper spindle 7.5 kW element width measurement electric height adjustment of the feed rollers electric height adjustment of the upper spindle spindle diameter 40 mm six top steel rollers yen top roller, rubber one roll in the table top pulling pneumatic pressure feed on cardan shafts pre-table length 2470 mm diameter of nozzles 140 mm Machine dimensions Cgjdpfx Ahjibq Nis Hon 456x240x220 weight 4000 kg

Condition: used, REX four-sided planer, planing width 51 cm, maximum planing height 20 cm, 2 feed speeds, vertical spindles have 2 rotation speeds, electric table lifting device Codpsrxf Smefx Ah Hjgn

Condition: used, Working width: 260 mm Working height: 160 mm Spindles: 5 Spindle 1: Bottom / 7.5 kW / 40 mm Spindle 2: Right / 11 kW / 40 mm Csdpsx Ttbnsfx Ah Hjgn Spindle 3: Left / shared motor with right / 40 mm Spindle 4: Top / 11 kW / 40 mm Spindle 5: Bottom / 4 kW / 40 mm Feed: 4 kW Weinig Profimat 23 planing and profiling machine for four-sided planing and profiling of timber in construction grade version, in excellent original condition and incl. planing heads (2 x 270 mm // 2 x 170 mm)

Condition: excellent (used), Weinig Profimat 23 Fortec four-sided planer Working width 230mm Working height 140mm Number of spindles 6 Arrangement of spindles Csdpfx Ahoumxqre Hsgn Bottom 7.5kw Right Left 11kw Top 7.5kw Top 5.5kw Bottom 5.5kw Pneumatic pressures Feed speed adjustable on variator Drive on cardan shafts CE certificate

Condition: used, Year of construction: 2000, Working width: 230 mm Working height: 160 mm Spindle 1: Bottom / 40 mm / 5.5 kW Spindle 2: Right / 40 mm / 7.5 kW Spindle 3: Left / 40 mm / Shared motor with spindle 2 Spindle 4: Top / 40 mm / 7.5 kW Spindle 5: Bottom / 40 mm / 5.5 kW Number of spindles: 5 Cgedpswztw Sefx Ah Hjn Four-sided planer and moulding machine Weinig Unimat 23E for four-side planing and profiling of timber, equipped with a mobile spindle for automatic adjustment and grooved bed (optionally without grooved bed) for short and curved workpieces, as well as a long jointer table. Included: Set of grooved bed cutters Optional: Conversion to conventional smooth table available upon request.

Condition: excellent (used), Year of construction: 1994, working width 230mm working heigth 120mm 5 heads heads set bottom/right/left/top/bottom spindles diameter 40mm two axes heads regulation variable regulated feeder spindles speed 6000 RPM Codpfx Ajpgu R Ajh Hsgn year 1994