Weinig

Weinig Profimat 23

Condition: excellent (used), Year of construction: 1995, Weinig Profimat 23E four side planer - German production - year of production 1995 - right and left spindles with a face milling cutter ensuring parallelism and a right angle of 900 - element width measurement Lrjdpfx Ahoibq Niezeg - electronic width adjustment TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm electronic planing width control 1 lower spindle 4 kW 2 right spindle 4 kW 3 left spindle 4.2 kW (face milling) 4 spindle right 4.2 kW (face milling) 5 upper spindle 7.5 kW element width measurement electric height adjustment of the feed rollers electric height adjustment of the upper spindle spindle diameter 40 mm six top steel rollers yen top roller, rubber one roll in the table top pulling pneumatic pressure feed on cardan shafts pre-table length 2470 mm diameter of nozzles 140 mm Machine dimensions 456x240x220 weight 4000 kg

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Lsdsudxchepfx Ahzorg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, Planer and rabbeting machine Weinig Profimat 23 for four-sided planning and profiling of timber as construction timber, in excellent original condition and including planer heads (2 x 270 mm // 2 x 170 mm) spindle: 5 Lrodpex Ttbnofx Ahzog spindle 1: Bottom / 7.5 kW / 40 mm spindle 2: Right / 11 kW / 40 mm spindle 3: Left / common motor with right / 40 mm spindle 4: Top / 11 kW / 40 mm spindle 5: Bottom / 4 kW / 40 mm working width: 260 mm working height: 160 mm feed: 4 kW

Condition: good (used), working width 230mm working height 120mm spindle diameter 40mm 4 heads + unit for cutting glazing bead control from ATS panel Lrodpfjvtt Ayjx Ahzog head adjustment in two axes electric adjustment of the pressure beam smooth adjustment of feed speed The machine worked in line with other machines.

Condition: used, Weinig Powermat 500 planer and moulder for four-sided planing and profiling of wood with CNC control and Powerlock quick-change system. spindle: 7 spindle 1: Bottom / 7.5 kW / 8,000 rpm spindle 2: Right / 7.5 kW / 8,000 rpm spindle 3: Left / 7.5 kW / 8,000 rpm spindle 4: Right / 7.5 kW / 8,000 rpm spindle 5: Top / 7.5 kW / 8,000 rpm spindle 6: Top / 7.5 kW / 8,000 rpm spindle 7: Bottom / 7.5 kW / 8,000 rpm working width: 230 mm Ljdoxzdwyopfx Ahzsrg working height: 120 mm feed: 30 m/min / 4 kW Planer table length: 2.500 mm Air cushion table: Yes Control: PowerCom Plus

Condition: used, Planing and moulding machine Weinig Profimat 23 for four-sided planing and profiling with universal spindle for pre-planed wood or other angled (planed) workpieces such as MDF or plastic parts. The planing spindle can be retrofitted if required. Spindles: 5 Spindle 1: Right (7.5 kW) Spindle 2: Left (motor together with spindle 1) Spindle 3: Top (7.5 kW) Spindle 4: Bottom (5.5 kW) Spindle 5: Uni (5.5 kW) Working width: 170 mm Working height: 120 mm Spindle diameter: 35 mm Feed: 2.2 kW // 5-24 m/min. spindles: 5 spindle 1: Right (5.5 kW) Dressing table length: 2.000 mm spindle 3: Above (4kW) spindle 2: Right / 7.5 kW / 40 mm spindle 4: Bottom (4kW) spindle 5: Uni (4 kW) Lsdpoxu H R Ajfx Ahzorg working width: 230 mm working height: 120 mm feed: 5 - 22 m/min control: ATS system table rollers: Driven table roller in the outlet

Condition: used, Planer and edge finishing machine Weinig Profimat 23 E for four-sided planing and profiling of wood with movable spindle. spindle: 5 spindle 1: Bottom / 5.5 kW / 40 mm Ljdpex Ecgusfx Ahzerg spindle 2: Right / 5.5 kW / 40 mm spindle 3: Left / shared motor with #2 / 40 mm spindle 4: Top / 7.5kW / 40 mm spindle 5: Bottom / 4 kW / 40 mm working width: 230 mm working height: 120 mm

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, The machine is currently in use. We offer live demonstration, dismantling loading, installation and training on your site Lrsdpfx Asv Uab Eehzjg

Condition: used, Planing and moulding machine Weinig Profimat 23 for four-sided planing and profiling with ATS system. spindles: 6 spindle 1: Below spindle 2: Right spindle 3: Left Ljdpfsw I A Sqox Ahzsrg spindle 4: Right spindle 5: Upstairs spindle 6: Below working width: 230 mm working height: 120 mm Dressing table length: 2.000 mm Planer table length: 2.000 mm control: ATS Control: ATS delivery time: On demand sample picture: Illustration similar

Condition: excellent (used), Weinig Profimat 23 Fortec four-sided planer Working width 230mm Working height 140mm Number of spindles 6 Arrangement of spindles Bottom 7.5kw Right Left 11kw Top 7.5kw Top 5.5kw Lodpfx Ahjumxqrszorg Bottom 5.5kw Pneumatic pressures Feed speed adjustable on variator Drive on cardan shafts CE certificate

Condition: new, Year of construction: 2022, functionality: fully functional, Brand New Friulmac EQ 004 2.5 with feeding belt and a feeding hopper Touch-Screen Operation and automatic adjustment Working length - min 190mm - max 2500mm width - min 30mm - max 250mm thickness - min 12mm - max 35mm Speed - 6 - 25m/min 2 x 2 Hoger - 3kW - 720 rpm Main Profiling Head - 4kW - 7200 rpm For more information I can send you the original documentation Lrjdpovupm Defx Ahzeg

Condition: excellent (used), Year of construction: 1994, working width 230mm working heigth 120mm 5 heads heads set bottom/right/left/top/bottom Lrjdjpgu R Ajpfx Ahzjg spindles diameter 40mm two axes heads regulation variable regulated feeder spindles speed 6000 RPM year 1994

Condition: ready for operation (used), functionality: fully functional, working width: 260 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 260 mm, working height: 170 mm, power of feed motor: 4,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Profimat 23 E Working width: 260 mm, working height: 170 mm, 5 spindles, spindle diameter: 40 mm, Lredpsvgnb Rofx Ahzeg Spindle arrangement: 1- Bottom - 5.5 kW 2- Right + 3- Left - 11 kW 4- Top - 5.5 kW 5- Bottom - 11 kW Feed rate: 6 - 24 m/min - 4 kW Air cushion in the table One driven roller in the table at the exit. With tool.

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration Roller, Steel Lodpfx Aoxqggcohzorg 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), Year of construction: 1995, Planer - Moulder Manufacturer: Weinig Type: Profimat 23 Year of manufacture: 1995 Working width: 230 mm Working height: 120 mm Planing table length: 2,000 mm Speeds: 6,000 rpm Spindle diameter: 40 mm Feed speed: 4 - 24 m/min Lrsdev Id Ngjpfx Ahzog Number of shafts: 6 Grooving saw: Yes Arrangement: U-R-L-R-O-U-grooving saw 1st shaft, bottom, 7.5 kW 2/3rd Shaft, right, left, 7.5 kW 4th shaft right, 7.5 kW 5th shaft top, 7.5 kW 6th shaft, bottom, 4.6 kW Groove saw: 2.2 kW Dimensions: approx. 4,500 - 2,000 - 1,800 mm Weight: approx. 3.5 tons