Sheet metal straightener

WMW Wildau UBR 32x2500

Condition: used, Year of construction: 1996, Technical details: pressure: 300 t chamfer lenght: 6000 mm control: Delem DA 24e distance between columns: 2x5100 mm throat: 645 mm dayligth: 520 mm plate thickness: 5 mm total power requirement: ca. 10,0 je machine kW weight of the machine ca.: ges. ca. 66 t dimensions of machine: L:12,0xB:2,3xH:3,65 m Hydr. Pressbrake 6000-300 - jib arm length= 720mm - incl. back gauge (without crowning system) adjustment travel horizontal/vertical: 680/200mm motoric Optionally, two of these press brakes can be offered Tsdsu Ib Dropfx Anleb - also applicable as a Tandem Pressbrake with 2x 6 meter with 300t, with table size: W:165xL.12000mm, - program sequence via both presse(synchronized) and single available Optional are tools available! Copy of documentation available i.D. *

Condition: used, Year of construction: 1973, pressure 200 t chamfer lenght 3600 mm distance between columns 2650 mm dayligth 500 mm Tsdpjt I D U Eefx Anljb throat 300 mm stroke 250 mm working feed 10,5 mm/sec return speed 100 mm/sec ram stroke speed 150 mm/sec table height 900 mm oil volume 500 l total power requirement 37 kW weight of the machine ca. 17800 kg dimensions of the machine ca. 3710 x 1800 x 3390 mm Equipment: - Controlled axes Y1 + Y2 - Manual X-axis with digital position display - Set of upper and lower tools - 2x stop fingers - 2x front support arms - Hand and foot controls - Side + rear safety guard - Operating instructions

Year of construction: 1992, condition: ready for operation (used), Working length: 4300mm, pressing force: 2000kN, connected load: 15kW, weight: 18t, including tools. Tsdpfoi Dx Sbex Anlob

Year of construction: 1989, condition: good (used), strip width: max. 1.840 mm Tjdeg Iih Nepfx Anljb strip thickness: 0,3 – 3 mm blade shaft Ø: 224 mm blade Ø: 350 mm

Year of construction: 1980, condition: good (used), 17 rolls, Ø 90 mm Tjdpfx Aednzvdsnlob strip width: 50 - 200 (250) mm strip thickness: 2 - 10 mm

Year of construction: 1975, condition: good (used), 11 rolls, Ø 130 mm Todjdnztkopfx Anlsb strip width: max. 1.900 mm strip thickness: max. 10 mm

Condition: good (used), Year of construction: 1992, machine/vehicle number: 20106, Offer 25100 Technical specifications: - Pressure capacity 200 t - Working width 3050 mm - Clearance between columns 2550 mm - Table width 180 mm - Throat depth 250 mm - Installation height 400 mm - Feed speed 80 mm/sec. - Working speed 6.7 mm/sec. - Retraction speed 67 mm/sec. - Ram stroke 150 mm - Adjustment range of fixed stops 120 mm Tsdowbgizepfx Anljb - Drive 400 V 14.5 kW - Space requirement approx. W 3800 x H 2980 x D 1700 mm - Weight approx. 11500 kg - With: - Backgauge with 2 stop fingers - Deer foot tool - 4-way universal die - Two-hand control panel, foot switch

Condition: used, Technical details: pressure: 315 t chamfer lenght: 5050 mm distance between columns: 4100 mm throat: 500 mm stroke: 250 (Wange) mm control: DNC 884s weight of the machine ca.: 27,0 t machine dimensions LxWxH: 5,7 x 2,2 x 4,0 m Machine stands approx. 0.95 m inside foundation in the floor. Application for: Embossing and free bending via the DNC control, manual, semi-automatic and automatic operation is possible. Tedpfxsu Iccps Anlob distance between table and upper beam max. 490 Table: with extension about 800mm, tool holder on the table = dovetail 30mm. accessories: many dies and punches *

Year of construction: 1967, condition: good (used), Overhauled in 2000, hydraulics and electrical system updated, table dimensions 3600x400. Tjdpelml Drsfx Anlob

Year of construction: 1967, condition: good (used), strip width: 300 - 1.250 mm strip thickness: 0,5 - 3 mm blade shaft Ø: 180 mm Tjdpfx Aogruhcjnleb