ZEISS coordinate measuring machine

Zeiss CMM CONTURA 10126 active

Condition: like new (used), Specifications Manufacturer GLEASON Nedpsxtpk Ajfx Abvscp Model 104 Condition Used Serial Number 631406 Stock Number DCN1749 Max working diameter 432 mm Module max 8,5 Description Equipped with change gears books

Year of construction: 2018, condition: excellent (used), Maximum component weight: 75 kg Maximum moment load of the work table: 1250 g/mm Ncjdei Dagkepfx Abvop Dimensions of work table: 800 x 890 mm Height of working table: 731 mm Measuring height: 500 mm Total height: 1675 mm

Condition: used, Year of construction: 2010, 2 Nedpfsqn A Rkox Abvjcp Number of axles 4 St. tool taper HSK 63 toll turrets 60 weight 9600 kg

Condition: good (used), Year of construction: 2017, In this offer you buy used office furniture, which is in good condition. They were delivered in 2017 and are generally in very good condition, since little used. Items for sale: We also offer workplace sets for 450€. 1x desk - Manufacturer: FM - 160 x 80 x 76 (stepless height adjustable 68cm to 76cm) - gray top - aluminum frame 1x office chair "Dauphin MagicShape elan - armrests - completely adjustable - cover polo grey/black 1x mobile pedestal - Manufacturer: FM - 43,4 x 80 x 59 - one material drawer - 3 steel drawers with softclose - lockable incl. key Ncedpfeiiv Ikex Abvsp Desks: - Approx. 10x desk from the manufacturer FM 1600 x 800 x 680 to 760 (infinitely height adjustable) in the color light gray. Frame made of aluminum - Approx. 12x folding table (can be used as a desk) 1600 x 800 x 720 on castors, in the color light gray. Aluminium frame - Approx. 2x round meeting table 1000mm diameter in the color light gray. Aluminium frame - Approx. 4x high table 1600 x 800 x 1300 in the color arctic white. Frame in white aluminum Chairs: - Approx. 10x Dauphin swivel chair MagicShapeS elan with armrests and fully adjustable. Fabric cover Polo black, base plastic black - Approx. 44x Interstuhl Hero 550H cantilever chair with armrests. Upholstery in ruby red color. Metal frame chrome-plated. - Approx. 52x Interstuhl Hero 550H cantilever chair with armrests. Upholstery in the color ocean blue. Metal frame chrome-plated. - Approx. 10x Interstuhl Kinecticis5 710K bar stool with footrest. Upholstery in the color black. Frame in silver color. - Approx. 16x Interstuhl Kinecticis5 710K bar stool with footrest. Upholstery in the color ocean blue. Frame in silver color - 12x Interstuhl Kinecticis5 710K bar stool with footrest. Upholstery in the color red. Frame in the color silver - 16x Interstuhl Kinecticis5 710K bar stool with footrest. Upholstery in the color ruby red. Frame in the color silver Storage space: - Approx. 16x FM 434 x 800 x 590 mobile pedestal with one material drawer and 3 steel drawers. Body completely in the color light gray. Handles made of aluminum meeting table with 4 conference chairs - 750,-€ net high table with 6 bar stools - 1500,-€ net Prices may vary slightly depending on the quantity purchased. We will be happy to prepare a suitable offer for you. You can also purchase each piece of furniture separately. Condition: This offer is used furniture, which may show signs of use (minor scratches or yellowing). Packing and shipping: You are welcome to look at everything during our business hours. Please make an appointment for this! Seaworthy packing and worldwide shipping is possible on request! For more information you can of course also contact us personally.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT Ncjdeud N Hdopfx Abvjp  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Ncsdpfx Abjt Hw N Hovep Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Year of construction: 1994, condition: excellent (used), machine/vehicle number: 04.2398, Manufacturer: Arthur Klink Type: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of construction: overhauled by manufacturer 1994 weight: 3700kg tractive force: 10.000kg (100kN) max. stroke: 1500mm max. workpiece diameter: Ø 500mm clearing speed: infinitely variable from 1m/min to 6m/min Njdpfsgyd T Ejx Abvjcp return speed: stepless adjustable up to 20m/min power supply: 400V / 50Hz

Condition: used, Year of construction: 2017, Technical details: Njdpfettxg Sox Abvscp grinding diameter: 280/320 mm grinding length: 750 mm centre height: 170 mm weight of the machine ca.: 22,5 t dimensions of the machine ca.: 4,7 x 3,65 x 3,0 m

Year of construction: 2010, condition: ready for operation (used), Electrode force: 100daN, welding capacity: 255kVA, nominal input: 80kVA, with Cooling System DALEX DRF 5.2. Ncsdpfx Abjiknv Esvsp

Year of construction: 1995, condition: used, machine/vehicle number: 18891, Force: 10 to. Ncodpfx Absbrcmkovop Stroke: 1000mm 3 Broaching-stations With chip-conveyor + platform and safety door