Measuring mchines

ZOLLER Venturion 810C3

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Lhjdpfshzbipsx Ahzeb Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: used, Year of construction: 2017, New spindel 2025-08 yearly service by Mazak Servicecenter. includes bar feeder Super 80 Max swing Ø 658 mm Swing over X-slide Ø 658 mm Swing when Y-axis is operating Ø 658 mm Max turning diameter Ø 658 mm Lodpfx Ahex Hfl Eozehb Max turning diameter from bar Ø 51 mm (option Ø 65) Max part length 1011mm X axis: 615mm Y axis: +/-130mm z axis: 1077mm B axis: 0,0001Deg / 240° Spindle 1 Spindle nose JIS A2-6 Spindle bore 76 mm Through-hole 51 mm (option Ø 65) Spindle motor AC 22 kW 40% ED Speed range 35-5000 rpm Number of speed ranges Direct drive Max torque 467 Nm 25% ED Max part weight including chuck 300 kg Center height from floor 1235 mm Spindle 2 Spindle nose JIS A2-6 Spindle bore 76 mm Through-hole Not applicable (option Ø 65) Spindle motor AC 18.5 kW 40% ED Speed range 33-5000 rpm Number of speed ranges Direct drive Max torque 325 Nm 40% ED Max part weight including chuck 300 kg Center height from floor 1235 mm C-axis 1 Type Direct drive Rapid feed 555 rpm Working feed 1-5000 degrees/min Minimum programmable increment 0.0001 degree C-axis 2 Type Direct drive Rapid feed 555 rpm Working feed 1-5000 degrees/min Minimum programmable increment 0.0001 degree W-axis Movement 1066 Rapid feed 30 m/min B-axis B-movement 240 degrees Max machining feed (ISO) 40 rpm Minimum programmable increment 0.0001 degree Tool Holder Type: Tool changer Tool Shank Size: 25 x 25 mm Tool Change Time, tool to tool: 1.3 seconds Chip-to-chip time, average: 8 seconds Tool Holder for rotating tools: Capto C6 Tool Holder for turning tools: Capto C6 Max Tool Weight: 12 kg Max Tool Length: 400 mm Clamping Force for Tool (Capto C6): 33 kN Tool Magazine: Number of tool positions: 36 pcs Max Tool Diameter: 90 mm Max Tool Diameter when the position before and after is empty: 125 mm Max Tool Length: 400 mm Max Tool Weight: 12 kg Max Torque for Tool: 9.8 Nm Other: Length: 3990/4910 mm Width: 2800 mm Height: 2720 mm Weight: 13100/16600 kg Power Requirement, continuous: 72.34 kVA Air Requirement, min: 5 kg/cm², 410 liters/min Tool Magazine: 36 tools Standard Equipment: B-axis Capto C6 ATC Auto Recovery Auto power on/off, heating schedule 19” LCD touchscreen Mazak tool identification system including 10 ID chips (for Capto C6) Measurement arm for tool length setting, automatic compensation, and tool breakage detection 8” Chuck Type: Kitagawa B208A6 8” Chuck Type: Kitagawa B208A6 Coolant Tank Coolant Pressure for Upper Turret: Max 5 bar, 23 l/min Set of Manuals: (digital) Smooth Standard Software: Mazacc 2D software (shape comp) Mazacc 2D software för roterande axlar (shape comp) Mazacc 3D High Speed software High Smoothing Control Seamless Corner Control Variable Acceleration Control Ultra High Speed Machining Mode Rapid Overlap ISO/EIA Programming: Lathe and milling spindle start unsynchronized Synchronized threading with rotating tools Macro interruption allowing event-driven ISO/EIA programs Macro programming with 600 additional variable pairs for ISO/EIA Helix interpolation for ISO/EIA Coordinate rotation with G68 for ISO/EIA Polar coordinates, G122 for ISO/EIA Synchronized interpolation X-C-axis G12.1 for ISO/EIA Coordinate systems G54 - G59 + 300 additional for ISO/EIA Direct input of drawing dimensions, e.g. starting corner for ISO/EIA Inverse Time Feed (G93) 3D Cutter Compensation (G40-G42)

Condition: ready for operation (used), Year of construction: 2008, Walter MINI POWER Lhsdpexnkzfefx Ahzeb Loader Fanuc

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you the following: Technical Data: Control: Heidenhain iTNC 530 HSCI Travel distances: - X-axis: 600 mm - Y-axis: 500 mm - Z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC Rotary Table: - Clamping surface: 600 x 500 mm - Load capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and Accessories: - Heat exchanger for spindle and table Lhodpfexgnz Tjx Ahzsb - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary/swivel table incl. table cooling - BLUM NT laser tool measurement - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Preparation for 3D quickSET - Hinged belt chip conveyor - ICS, 40 bar, 600 l tank, incl. rotating viewing window, sealing air, linear measurement systems, bed flushing - Rinsing pistol - Mechanical oil and emulsion mist separator - Air blast through spindle center - Mode of operation 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of the zero-point clamping system - Activation/deactivation of handling system via switch on machine operator panel - Additional rinsing in the machining area included - Preparation for job management included - Operator panel arrangement on the left included - Power supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - Extension of rotary union to 4 channels included On-time hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the pictures is not included in the scope of delivery. The machine is expected to be available from October/November 2025. The ball screw drives and linear guides in the X and Z axes have been replaced. Accessories, depicted tools, and clamping equipment are only included if specifically mentioned in the additional information. Subject to changes and errors in the technical specifications and information. Prior sale reserved!

Condition: new, Year of construction: 2024, functionality: fully functional, travel distance X-axis: 720 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: TNC 640, rotational speed (max.): 15,000 rpm, General Spindle :Direct drive Speed :15,000 rpm Power :34 kW Torque :180 Nm Tool holder :SK 40 Tool changer :90 stations Working range Travel X: 720 mm Travel Y :600 mm Travel Z :500 mm Rotary/swivel table :D= 700 mm Lhedotpm Nispfx Ahzob Table load :350 kg C-axis resolution :0.001 degree Other features Rapid traverse X/Y/Z: 36 m/min Max. speed B-axis: 25 rpm Max. speed C-axis: 25 rpm Equipment Chip management : Chip conveyor Coolant supply : IKZ 40 bar Workpiece measurement : Renishaw OMP 40 Tool measurement : BLUM laser bridge Software : Kinematic Optimizer

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Z-axis: 500 mm, For sale is a Garant tool presetting device, model VG1. The measuring system is in very good condition and ready for immediate use. Technical data: Year of manufacture: 2010 Measuring range X-axis: 400 mm Measuring range Z-axis: 500 mm Measuring accuracy: 1 µm Tool holder: SK50 Transport and loading can be organized across Europe upon request and for an additional charge. Prices are subject to VAT. Inspection is possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Lhodpsxf T R Rjfx Ahzjb Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your machine? For more information or contact options, please visit our website.

Condition: new, travel distance X-axis: 850 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 48,000 m/min, rapid traverse Y-axis: 48,000 m/min, rapid traverse Z-axis: 48,000 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 7, workpiece height (max.): 450 mm, workpiece diameter (max.): 750 mm, workpiece weight (max.): 500 kg, rotary table diameter: 630 mm, rotational speed (max.): 12,000 rpm, overall weight: 14,000 kg, coolant supply: 40 bar, spindle motor power: 32 W, spindle nose: SK 40 BIG PLUS (BVD 40), number of slots in tool magazine: 60, tool length: 300 mm, tool diameter: 150 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, BRAND NEW 5-AXIS SIMULTANEOUS MACHINING CENTER HEIDENHAIN TNC 7 digital contouring control with 19" screen HEIDENHAIN package (motors, measuring systems, and handwheel) Lodpsp Nnutefx Ahzohb Additional equipment: Renishaw OMP 60 wireless touch probe Renishaw NC 4 laser tool monitoring system HEIDENHAIN KKH 125 calibration sphere with KINEMATICS Full enclosure Accuracies: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Only inquiries from Germany will be answered

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT50 - Spindle power : 40 [kW] - Spindle speeds : 12000 [rpm] - Gearbox - Speed ranges : 2 LINEAR AXES - Travels on X/Y/Z axes : 2400/1650/1750 [mm] - Rapid traverses rates (X/Y/Z) : 42 [m/min] - Cutting feed rates (X/Y/Z) : 20 [m/min] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 116 - Tool exchange time : 3.8 [sec] PALLET CHANGER - Pallet changing device type : Rotopalette - Pallet size : 1600 x 1250 [mm] - Pallets number : 2 - Maximum weight upon pallet : 5000 [kg] - Distance table center / spindle nose (min./max.) : 100 - 1750 [mm] - Maximum workpiece diameter : 2500 [mm] - Maximum workpiece height : 1850 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 86 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 9.485 x 6.155 [mm] - Machine height : 4.370 [mm] - Machine weight : 50000 [kg] MACHINE HOURS - Number of working hours : 15446 [h] EQUIPMENT - CNC : Fanuc 31i-model B5 Interface : Ethernet / RS232 / USB / PCMCIA - SOFT SCALE II - Electronic handwheel Lodpfsw Ephbsx Ahzehb - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 70 [bars] * Coolant through spindle * with paper filtering unit * with cooling unit for coolant * With washing gun * With cabin washing - Chips conveyor - Spindle cooling unit - Tool probe - Workpiece probe : Renishaw RMP60 - Tool breakage detection : SOFT AC - Pallets number : 2 - Milling vice - Tool-holders

Condition: excellent (used), Year of construction: 2010, Used Hankook model 7NB x 4000 2 axis CNC lathe Year 2010, serial number 41L09117 Lhodpsv Rqftsfx Ahzsb Manufacturer Hankook Country of Origin South Korea Model Protec 7NB x 4000 mm Machine Type Description 2 Axis CNC flat bed turning Centre CNC Control Fanuc 21- iT with MG-i MACHINE CONSTRUCTION & FEATURES  Heavy Cast iron Construction  Heavy Duty Hardened & Ground Solid Slideways  Large Spindle Bore  Full Length Rear Chip Guard  Automatic Lubrication to All Critical Areas MACHINE CAPACITIES Swing Over Bed Ø 750 mm Swing Over Carriage Ø 480 mm Max. Turning Dia. Ø 750 mm Distance Between Centres 4,000 mm Load Capacity 3,000 Kg SPINDLE Spindle Bore Ø 176 mm Nose A2-11 Spindle Centre Taper MT #6 Spindle Speed 3 – 1,000 RPM Spindle Speed Range Manual 2 Step AUTOMATIC V8 TURRET Number of Tools 8 Holder Diameter Ø 60 mm Mechanism Electric FEEDS Rapid Traverse X 3 m/min Z 6 m/min Travel X 425 mm Z 2070 mm TAILSTOCK Taper/Diameter MT #6 Quill Diameter Ø 112 mm Max. Quill Travel 200 mm MOTORS Spindle 15/18 Kw X - Axis 1.2 Kw Z - Axis 3 Kw WEIGHT Weight 5,520 Kgs STANDARD MACHINE FEATURES • CNC System • Single Front Door • Coolant System • Foundation Bolts and Liners • Work Light • Work Light • Centre Sleeve MT #6 x Taper 1/10 • Tool Box • Centre MT #6 • Full Length Rear Guard • Live Centre MT #6 STANDARD FITTED MACHINE OPTIONS • Fanuc 21-iT • Transformer for 415V, 3Ph, 50Hz HANKOOK 7NB x 4000mm with Fanuc 21-iTB Modified guarding for long boring bars 20” Chuck Steady rest 50 - 250mm Steady rest 250 - 450mm Algra Automatic 8 station Turret Boring Bar attachment 100mm diameter 60mm diameter boring bar toolholder (1 off) Inch Metric conversion Custom Macro B Additional Block Skip G Code System B/C Programmable Data Input Actual Spindle Speed Output tool offsets 32 Pairs Extended Part Program Edit Manual Guide i External i/o device control External data Input High Skip ADDITIONAL ACCESSORIES INCLUDED • Special Revolving Centre (TBC) • Marposs TT30 Removable Tool setting Arm • Short LNS swarf conveyor and coolant / swarf trays • Sandvik damped/tuned boring bar of size 100mm dia x 1500mm length supplied with the boring attachment. • Filtermist filtration • Additional door guarding.

Condition: good (used), Year of construction: 2011, Ref. -No.: 10615 Manufacturer: DMG Type: DMU 210 P Year of construction: 2011 Type of control: CNC Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 128/XXXX Lsdpfxex R R E Sj Ahzshb X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Swivel range: -30 / +180 ° Table Load: 10000 kg Max. rotary table diameter: 1700 O Table speed range: 12 min/-1 Tool Taper: SK 50 Numbers Of Tools In Magazin: 60 Weight Of The Machine Ca.: 41 t Motor spindle: 24000 RPM Feed drive A, C: 30 min/-1 horizontal milling head: 130-1.380 mm vertical milling head: 230-1.480 mm