Condition: ready for operation (used), Pull tube for tensioning device from IKEGAI TURN 25 , length tube: 730 mm, Ø 75 mm, hydraulically operated, used, normal signs of wear, 100% functional ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please inquire for charges for packing and transport separately! Bdedj Ahfuhopfx Abusi

Condition: ready for operation (used), zentro-elektrik 8610-1 power supply SN:100611, used, normal signs of use, 100% functional, scope of delivery as per photos Bdedpfj Aaxhzsx Abuei

Condition: ready for operation (used), Heidenhain UM 113 Id.325 002-03 SN: 13307325 – with test protocol, professionally overhauled and fully tested, comes with a 6-month warranty, 100% functional, scope of delivery as shown in the photos. Please note: In the exchange process, your defective part must not have any mechanical damage such as fractures, as these can no longer be repaired. In such cases, an additional invoice of €1,000 including VAT will apply. Attention: You are bidding on an inverter from Heidenhain (UM 113 ID 325 002-03 SN13307325) as an exchange (Exchange service), professionally overhauled and fully tested, with a 6-month warranty, 100% functional, and scope of delivery as shown in the photos. In both repair and exchange procedures, your defective exchange part must not show any mechanical damage like breakage, as these cannot be repaired. In such a case, a follow-up invoice of €1,000 including VAT will be issued. Bdsdpfx Abj Aa Hlujuei

Condition: new, ARI-Armaturen 23.470 Pneumatic Control Valve DN65 PN25 – Siemens SIPART PS2 Industrial pneumatic control valve manufactured by ARI-Armaturen, equipped with an ARI pneumatic diaphragm actuator and a Siemens SIPART PS2 electro-pneumatic valve positioner. The valve is suitable for industrial process control applications requiring precise regulation of flow, pressure, or temperature. Technical specifications: * Manufacturer: ARI-Armaturen * Valve type: 23.470 * Valve design: Globe control valve * Nominal diameter: DN65 (2½”) * Pressure rating: PN25 * Flanged connections: EN 1092-1 / EN 12351-4 marking on protective cover * Valve body marking: JS1049 * Valve tag/reference: 799000252 Pneumatic actuator: * Manufacturer: ARI-Armaturen * Diaphragm actuator * Actuator travel: 30 mm * Spring range: 1.50–3.00 bar * Supply pressure range: 3.3–6 bar Valve positioner: * Manufacturer: Siemens * Series: SIPART PS2 * Model: 6DR5010-0NG00-0AA0 * Control signal: 4–20 mA * Protection class: IP66 / NEMA Type 4X Bjdpe Agu T Aefx Abujdi Condition: Industrial surplus equipment, visually in very good condition. Functional testing has not been performed. The valve is supplied as a complete assembly, including the pneumatic actuator and Siemens SIPART PS2 positioner, as shown in the photographs. Location: Rotterdam, Netherlands Delivery: EXW Rotterdam Sales conditions: Sold as is, where is, without warranty, claims, or returns. Please contact us for further information or a quotation.

Condition: ready for operation (used), Heidenhain UM 113 Id.325 002-03 SN: 13307325 – with test protocol, professionally fully overhauled and tested with 3 months warranty, 100% functional, delivery scope as shown in the photos, used, in good condition, 100% functional, delivery scope as per photos. Bdsdj Aa Hlzepfx Abuei

Condition: new, Hongfa HF187F/24-4HBTF – Industrial Power Relays – 15,000 pcs We are offering a large stock of approximately 15,000 Hongfa HF187F/24-4HBTF industrial power relays. The relays are unused surplus stock, supplied in original Hongfa manufacturer packaging, including protective plastic trays and cardboard boxes. Technical Specifications: * Manufacturer: Hongfa * Model: HF187F/24-4HBTF Bsdpfx Abj Agxfksusdi * Product type: Electromechanical power relay * Coil voltage: 24 V DC * Normally open (NO) contact: Making 10 A, carrying 40 A * Breaking capacity: 10 A at 440 V AC * Normally closed (NC) contact: 1 A at 125 V AC / 30 V DC * Manufacturer part number: 45789110002 * RoHS compliant * Country of manufacture: China Stock & Packaging: * Total available quantity: Approximately 15,000 pieces * Condition: New / unused surplus stock * Original Hongfa packaging * Protective plastic trays * Manufacturer-labelled cartons * Bulk quantities available * Smaller quantities available upon request Suitable for industrial electrical applications, switching systems, control equipment and OEM manufacturing. Location: Botlek Rotterdam, The Netherlands Delivery terms: EXW Rotterdam Worldwide shipping can be arranged upon request. Goods are sold as is, where is, without warranty, claims or returns. Please contact us with your required quantity for a quotation.

Condition: used, Approx. 80 circuit breakers Electronics / PLC controls Technical details: Manufacturer: ABB Type: RC223 Additional information: Bdodpjzu Tnhsfx Abusi Manufacturer: ABB Type: RC223 Condition: Good used condition. Fully functional until removal. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, 80 Control Units Electronics / PLC Controls Manufacturer: FESTO Type: CPX-CEC-C1 Bdodpfx Abezvhnfjuoi Condition: Good used condition. Fully functional prior to removal. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, 80 Frequency Converters Electronics / PLC Controls Manufacturer: REXROTH Type: PSI 63CO.357 L1 Bjdpfezu A S Aox Abuodi MNR: R911332356-AF1 Condition: Good used condition. Fully functional until removal. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: ready for operation (used), Fanuc A06B-0127-B177 AC servo motor, serial number: C945C3795, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bodpfx Aj Adx E Uobujdi

Condition: ready for operation (used), Fanuc A06B-0123-B177 AC servo motor, serial number: C973C6232, used, in good condition, 100% functional. Scope of delivery as shown in the photos. Bdsds Adx E Ijpfx Abuei

Condition: new, For sale: ABB ACS580-01-062A-4 industrial variable frequency drive (VFD). Brand new, unused, and supplied complete in original packaging, including ABB control panel, PROFIBUS DP communication module, documentation, and accessories as shown in the pictures. Technical Specifications: * Manufacturer: ABB * Model: ACS580-01-062A-4 * Full type code: ACS580-01-062A-4+J400+K454 * Material code: 3AUA0000130331 * Rated motor power: 30 kW / 40 HP * Input voltage: 3-phase 400/480 V AC * Input current: 62/52 A * Output current: 62/52 A * Input frequency: 50/60 Hz * Output frequency: 0–500 Hz * Protection class: IP21 * Frame size: R4 * Cooling: Air-cooled * Country of manufacture: Finland Included: * ABB ACS580 frequency inverter * ABB ACS-AP-S control panel * PROFIBUS DP communication module * Original documentation and accessories as pictured * Original packaging Condition: New / Unused Availability: 2 units in stock. Suitable for industrial motor control, pumps, fans, conveyors, and various automation applications. Location: Botlek Rotterdam, The Netherlands Delivery terms: EXW Rotterdam Worldwide shipping can be arranged upon request. Bdodpfxe Afu S Hs Abuji Please contact us for further information.

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00629, load capacity: 210 kg, arm reach: 2,655 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iC/210F manufactured in 2017.03. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Model: R-2000iC/210F Bdedpfj Ahfmajx Abusi Model Number: A05B-1333-B205 Year of Manufacture Robot: 2017.03 Warranty term (months): 12   Payload (kg): 210 Reach (mm): 2655 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1090   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2017.02 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: new, For Sale – Complete Lot of 30 Endress+Hauser Pressure Transmitters with BADOTHERM Diaphragm Seals We are offering a complete lot of 30 Endress+Hauser industrial pressure and differential pressure transmitters, equipped with BADOTHERM diaphragm seal systems. Available quantity: 11 × Endress+Hauser PMD75 – Differential Pressure Transmitters 19 × Endress+Hauser PMP71 – Pressure Transmitters 30 units in total 13 different BADOTHERM item numbers Technical details: Manufacturer: Endress+Hauser / BADOTHERM Models: PMD75 and PMP71 Diaphragm seal assemblies Stainless steel process connections Various pressure measuring ranges Selected configurations with 7-meter capillary tubes, AISI 316L Individual serial numbers and tag numbers available Condition: Unused surplus equipment, supplied in original BADOTHERM packaging. Factory seal status has not been verified. Documentation: Detailed Excel inventory with item numbers, serial numbers, measuring ranges, and quantities available upon request. Sales conditions: Preferably sold as one complete lot. Location: Rotterdam, The Netherlands. Delivery: EXW Rotterdam. Surplus equipment sold as is, where is, without warranty, claims, or returns. Bjdo Agfwmepfx Abujdi Please contact us for pricing, additional photographs, or further technical information.

Condition: refurbished (used), Year of construction: 2013, machine/vehicle number: R-00580, load capacity: 20 kg, arm reach: 1,811 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-20iA manufactured in 2013.05. The robot comes with an R-30iA B-Size controller including iPendant. Bsdpfx Aez Anlkjbuodi   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-20iA Model Number: A05B-1222-B202 Year of Manufacture Robot: 2013.05 Warranty term (months): 12   Payload (kg): 20 Reach (mm): 1811 Repeatability (mm): ± 0.08 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 250   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2013.05 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10  

Condition: refurbished (used), Year of construction: 2021, machine/vehicle number: R-00644, load capacity: 165 kg, arm reach: 2,655 mm, controller manufacturer: R-30iB Plus A-size, teach pendant manufacturer: A05B-2256-C101#EGN, Refurbished FANUC R-2000iC/165F manufactured in 2021.12. The robot comes with an R-30iB Plus A-size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Model: R-2000iC/165F Bdedj Ahflvepfx Abuji Model Number: A05B-1333-B201 Year of Manufacture Robot: 2021.12 Warranty term (months): 12   Payload (kg): 165 Reach (mm): 2655 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1090   Controller: R-30iB Plus A-size Year of Manufacture Cabinet: 2021.12 RCC Length (m): 14   Teach Pendant: A05B-2256-C101#EGN Teach Pendant Cable Length (m): 10

Condition: excellent (used), Year of construction: 2019, operating hours: 7 h, ABB 2600-12/1.85 Type B + Trackmotion 2.9 meters, complete, like new, DTC 7 hours, 2019 DEVELOPMENT OF GSG ROBOTICS Bjdpoz Tacnjfx Abusdi GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015 and offers a comprehensive service area for robot maintenance and repair. Over the years, we have developed into a holistic partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: good (used), Specification ASSCON Quicky 450 Type Batch vapor-phase soldering machine Maximum PCB/workpiece size 450 × 450 mm Maximum component height 50 mm Soldering temperature 100–260 °C Bdsdpj Afy Eqjfx Abusi Supply voltage 230 V / 50 Hz Connected power 3.5 kW Average power consumption at full load 1.5 kW Medium filling (Galden) 2 kg Standard cycle time approx. 6 minutes Dimensions (w × d × h) 600 × 635 × 1,135 mm Weight approx. 180 kg

Condition: used, Yokogawa WT5000 Precision Power Analyzer Yokogawa WT5000-HG-F High-precision power analyzer for electrical power measurements For sale is a used Precision Power Analyzer from Yokogawa Test & Measurement Corporation. The device is suitable for highly accurate power, voltage, current, and energy analysis in development, research, testing laboratories, power electronics, drive technology, and quality assurance. Technical Data Manufacturer: Yokogawa Type: WT5000-HG-F Device Type: Precision Power Analyzer Date of Manufacture: November 14, 2024 Serial No.: T11C17539 Equipment Name: Precision Power Analyzer Model: WT5000 Suffix: -HG-F Made in Korea Measuring Element: 760903 Current Sensor Element Voltage Input: 1000 V max. Sensor Power: ±15 V DC Configuration / Modules as shown in the pictures Connections / Interfaces: Ethernet USB 3.0 USB Front Connection GP-IB / IEEE 488 Video Out / XVGA BNC Connections Ext. Clock Bodezhl D Ijpfx Abujdi Analog / Pulse Inputs Power Connection: 100 - 120 V / 200 - 240 V AC 50 / 60 Hz 650 VA max. Dimensions (W × H × D): approx. 430 × 221 × 550 mm Weight: approx. 18 kg Features Large color display Touchscreen operation Front-side control buttons Multi-channel measurement system Pluggable measuring elements Current sensor element 760903 USB data interface Ethernet interface GP-IB interface Video output Power cable Accessories as shown in the pictures Applications Power measurement Energy analysis Electric motor testing Inverter testing Power electronics Battery and drive technology Automotive Research and development Testing laboratory Quality assurance Scope of Delivery Yokogawa WT5000-HG-F Precision Power Analyzer Power cable Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The table or other items shown in the photos that are not explicitly mentioned are not part of the sale. Shipping is possible. Subject to changes, errors, and prior sale. We would be happy to answer any further questions by phone.

Condition: used, Rotating device Gunter Seibold rotating device for HTS coils – continuously variable drive (Type S05082) Description: Professional rotating device for holding and rotating HTS coils with winding cores. Developed for the uniform distribution of two-component resin during the curing process. Ideal for development, laboratory, or production environments with high-temperature superconductor coils. The winding form is electrically heated; the power supply is directly connected to the form (not included in the scope of delivery). The machine impresses with its precise control, ease of operation, and service-friendly design. Technical features Solid machine stand: Welded square tube construction with adjusting screws and floor anchors Drive: Three-phase planetary gearbox motor (11 kW, 400 V, 50 Hz, 3 phases) Continuously variable speed (0.2 – 100 min⁻¹) Soft start & soft stop via frequency inverter (4-quadrant controller) Electromagnetic spring force brake (safe stopping in case of power failure) Rotating direction can be switched left / right Control panel: Bsdpfxjzil R Rs Abuodi 5.7" touch panel for setting speed, direction, ramps, time, or number of revolutions Emergency stop button, ergonomically integrated 2 programmable analog inputs Electrical system & control cabinet: Control integrated in the machine stand 400 V / 230 V power supply, 24 V DC control voltage Circuit breaker, RCD protection 30 mA Sockets: 8× 230 V / 16 A, 2× 400 V / 16 A CEE, 1× 400 V / 32 A CEE Control cabinet with air conditioning unit Complete grounding & static discharge of the main shaft Adjustable work area light (swivel and height adjustable) Feature / Value Max. coil diameter 1,500 mm Coil passage 1,700 mm Center height above floor 1,100 mm Max. load on turntable 500 kg Turntable Ø 600 mm, 4 T-slots (DIN 650) Speed range 0.2 – 100 min⁻¹ (continuously variable) Torque 775 – 539 Nm Operating voltage 400 V / 50 Hz Control voltage 24 V DC Connected power 11 kW Connected current 32 A Color scheme (according to RAL) Base machine: Blue (RAL 5010) Moving parts: Yellow (RAL 1021) Control panel / control cabinet: Light gray (RAL 7035 / 5010) Weight: approx. 1800-2000 kg Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and specifications are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Stäubli Type: Stäubli Robot RX160 and CS8C controller with handheld device, software, and PC. Measuring Robot Measuring robotics for measuring, analyzing, and evaluating quality characteristics. RobFlow (measuring robotics software) Full version and dongle on an integrated Siemens industrial PC. 6AG4114-1NC22-4EX0 Laser Distance Sensor Model ILR 1181-30 Technical Data: Measuring range 0.1 … 50 m on natural, diffusely reflecting surfaces, 50 m up to a maximum of 150 m on a reflector panel. Linearity ±2 mm (+15°C … +30°C), ±5 mm (-10°C … +50°C) Resolution 0.1 mm Repeatability ≤ 0.5 mm Response time 100 ms ... 6 s (ILR 1181-30) 20 ms ... 6 s (ILR 1182-30) Laser according to IEC 825-1 / EN 60825 Red 650 nm, laser protection class 2, power ≤ 1 mW Beam diameter < 11 mm at a distance of 10 m Beam diameter < 35 mm at a distance of 50 m Beam diameter < 65 mm at a distance of 100 m Laser divergence 0.6 mrad Operating temperature -10°C … +50°C Storage temperature -20°C … +70°C Applications: RobFlow is a modular system. The scope of functions of the standard package can be expanded with additional plugins for specific tasks and customer-specific extensions. With the available functions, the following applications can be implemented, for example: Infotainment testing: Optical and haptic tests Individual operations and path movements straight, meandering, curve segments Bjdpfx Abozdyt Aeusdi Analysis and evaluation functions Steering column testing: Haptic tests along complex paths Large measuring range thanks to a multi-calibrated force/torque sensor Easy to program thanks to RobFlow Air vent end-of-line testing: Haptic and optical tests Interchangeable test adapters for a variety of devices Automatic testing, evaluation, and labeling including integrated leak test Vehicle seat testing: Functional and haptic tests Headrest distance measurements Comfort and stiffness assessments Service life and fatigue tests The advantages of RobFlow at a glance: User-friendly operation No programming language skills required Variable and dynamic test sequences Branching sequence control Easy exchange of test programs between development and production Extensive analysis and evaluation functions Graphical measurement data display and report generation Flexible and expandable through plug-in architecture Stäubli Robot RX160 with 379 operating hours Controller CS8C RX160 Lifting capacity (nominal load - kg) 20 kg and handheld device SP1 Total weight 500 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: ready for operation (used), Fanuc A06B-6052-H002 AC spindle servo unit, serial number P92003795, used, in good condition, 100% functional, scope of supply as shown in the photos. Bedpfxs Adx H Es Abuodi

Condition: used, Stäubli Stäubli TX60 industrial robot with CS8C-TX60 controller – 6-axis robot arm Bdjdpfx Aoziaayobuoi For sale is a used Stäubli TX60 industrial robot, including the CS8C-TX60 control unit. This robot is ideally suited for precise handling, assembly, or testing tasks in automation technology. Technical data – Robot arm TX60 Axes: 6 Max. payload: 4.5 kg (up to 9 kg possible) Reach: 670 mm Repeatability: ± 0.02 mm Mounting: Floor, wall, or ceiling Protection class: IP65 (optional IP67 at the wrist) Robot weight: approx. 51.4 kg Controller CS8C-TX60 Power supply: 1X230V-50/60Hz, 1700 VA, 120 kA Compact 19" controller with VAL3 control Communication via Ethernet / RS232 / Fieldbus (optional) Digital inputs/outputs and expansion options Protection class: IP20 (optional IP54) Dimensions: approx. 331 × 445 × 455 mm Controller weight: 31 kg Scope of delivery Stäubli TX60 robot arm CS8C-TX60 controller Connection cable (robot–controller) Teach panel, handheld device Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Stäubli Type: Robot TX90L / Controller CS8C Six-axis robot with controller The high-performance robots of the TX90 series, designed for medium payloads, offer maximum flexibility for a wide range of applications due to their compact and streamlined design. Thanks to the three mounting options – floor, wall, and ceiling – the six-axis robots are easy to integrate. The fully encapsulated design (IP 65) allows for use in cleanrooms or under harsh environmental conditions. Features Fully encapsulated design with internal supply lines Rigid structure Multiple mounting options Patented Stäubli JCM gearbox modules Large reach Advantages Perfect protection of the components. Standard version for cleanroom class ISO 5. Easy to clean. Excellent dynamic path behavior High flexibility Precision, dynamics, and speed with reduced maintenance Optimal use of the workspace Technical Data TYPE TX90L Number of degrees of freedom 6 Nominal payload 6 kg Maximum payload 15 kg Reach 1200 mm Repeatability ±0.035 mm Protection class (wrist) IP65 (IP67) Mounting options Floor / Wall / Ceiling Controller Stäubli CS8 CS8C Features Bdjdpfx Aezh U Sbjbuji Ethernet, fieldbus, digital inputs and outputs, serial interfaces Easy to integrate, 19-inch rack-mount version, protection class IP20 All connections on the front Proven digital technology Advantages Open architecture Compact Good accessibility Reliable Technical Data: Type CS8C Dimensions (H x W x D) 331 x 445 x 455 mm 481 x 445 x 455 mm Protection class IP20 (IP54 optional) Working memory 64 MB RAM (min.) Storage capacity 128 MB (min.) Flash disk and USB port System/programming language VAL 3 (multitasking interpreter language), PLC-IEC 61131-3 language Communication Serial interface RS232/422, Ethernet, ModBus/TCP server Type: Robot TX90L / Controller CS8C Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Stäubli Type: TX90L robot / CS8C controller Six-axis robot with controller For sale: a Stäubli TX90L 6-axis industrial robot including CS8C controller and original teach pendant. The robot is suitable for pick & place, assembly, handling, machine loading, as well as automation, testing and training applications. Programming via VAL3. Technical data – Robot Type: TX90L Axes: 6 Bdodezix Ucspfx Abuoi Payload: 5–6 kg nominal, up to 15 kg temporarily Reach: approx. 1,200 mm Repeatability: ±0.035 mm Wrist protection rating: IP65 (IP67) Mounting: Floor / Wall / Ceiling Robot weight: approx. 113 kg Technical data – Controller Controller: Stäubli CS8C Software: VAL3 s6.7.1 Programming language: VAL3, PLC IEC 61131-3 Interfaces: Ethernet, fieldbus, digital I/O, serial interfaces Power supply: 3 × 400 V, 50/60 Hz Power consumption: approx. 2000 VA Protection rating: IP20 Controller weight: approx. 50 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) Stäubli TX90L robot arm CS8C controller Original teach pendant Connection cable (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by phone.