Used bale presses for sale (208)

Condition: good (used), Year of construction: 2016, functionality: fully functional, Vertical baler HSM V-Press 1160 plus, year of manufacture 2016 Technical Data: Manufacturer: HSM Model: V-Press 1160 plus Year of manufacture: 2016 Pressing force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Feed opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (W x D x H) Weight: 2430 kg Materials: Paper, cardboard, film The baler is in good condition. Operator's manual and CE declaration are available. Inspection can be arranged at any time, including under power. Upon request, we can also carry out test runs with your material for a handling fee. We are happy to answer your questions about the machine by phone from Monday to Thursday from 08:00 to 14:00. On Fridays we are available from 08:00 to 13:00. Please note: All technical data are based on the manufacturer's information. We do not assume liability for the given data or possible errors. Isdpfjx Irw Rjx Addoal Offer is subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by prior arrangement. Sale is ex works, prepayment required, without warranty or guarantee.

Condition: used, Year of construction: 2003, Technical details: pressure: 40 t box opening: 1200 x 730 mm material: Pappe,Plaste - cardboard bottles voltage: 400 / 50 V / Hz total power requirement: 16,4 kW transport measurements machine: 6,5 x 6,2 x 2,7 m Fully automatic hydraulic CHANNEL BALL PRESS for recycling Iajdpju Nw Ezofx Addjl with conveyor unit/conveyor belt LxW: 4500x1000mm motor driven with automatic binding unit 3-fold bale count display/counter bale chamber LxWxH: 1800x800x800mm with 1,2m³ volume bale size LxWxH: 800x800x300-1600mm Filling opening LxW: 1200x730mm: Filling height 1200mm Hopper size LxWxH: 1200x1200x1400mm; filling height 2500mm *

Condition: ready for operation (used), Year of construction: 2010, Brand: HSM Model: V-Press 1160 plus Iodpfx Aex Nruxeddjal Year of manufacture: 2010 Pressing force: 532 kN Voltage: 400 V Maximum bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 19.5 x 65 x 111.5 cm Condition: very good! Functionality checked. FLITS Rental & Sales service: with every machine we include a bundle of baling wire (120 wires). Do you require additional bundles of baling wire? Please request a complimentary quote. At FLITS Rental & Sales, you choose speed, transparency, and reliability. We think along with you, respond immediately, and ensure you quickly receive the right machine. You are very welcome to view the machines at our premises. We are located at Schoterlandseweg 94, 8413NE Oudehorne. Visits are by appointment, so we can take the time to advise you thoroughly and present the most suitable machines. We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste processing

Condition: used, Year of construction: 2016, functionality: fully functional, pressing force: 80 t, filling opening width: 1,040 mm, filling opening length: 1,110 mm, bale length: 1,200 mm, bale width: 1,120 mm, bale height: 1,120 mm, bale weight: 500 kg, total width: 1,830 mm, total height: 2,620 mm, total length: 4,200 mm, input voltage: 400 V, overall weight: 8,000 kg, The DIXI 80 SLD horizontal baler is a powerful, robust industrial baler designed for demanding applications, featuring efficiency, high compaction force, and long-lasting quality. As a used machine, this baler is ideal for businesses looking for a cost-effective solution to reduce the volume of packaging materials such as cardboard, films, and similar recyclables. The semi-circular bale chamber and the hydraulic press system ensure reliable compaction, while the automatic return stroke and hydraulic bale ejection mechanism provide efficient and safe operation. Efficient Compaction with High Pressing Force The DIXI 80 SLD offers a pressing force of 80 tons, enabling it to compact large amounts of material into compact, stackable bales. This results in significant reduction of waste volume, optimizing storage capacity and lowering disposal costs. Automatic Press Cycle Control The fully automatic press cycle control ensures efficient and smooth operation. After material is loaded, the pressing process starts automatically, and bale ejection is also performed automatically. This minimizes manual labor and increases productivity. Versatile Applications This horizontal baler is suitable for a wide range of materials, including: - Cardboard (corrugated, packaging board) Iajdpox I A H Nofx Addjl - Film (stretch film, shrink film) - Plastic packaging - Other recyclable materials in medium quantities Thanks to its optimized compaction technology, the DIXI 80 SLD produces uniformly shaped, stable bales that are easy to transport and store. The high density of the bales allows for optimal use of transport and storage space. User-Friendly & Safe The baler features intuitive controls for easy operation. Safety is a top priority: the machine is equipped with various safety mechanisms, including: - Emergency stop function - Safety interlock - Automatic overload stop function Ideal for High-Volume Waste Producers The DIXI 80 SLD is the perfect solution for industrial operations, logistics centers, recycling companies, supermarkets, and warehouses that need to compact large quantities of recyclables daily. It not only ensures space-saving waste management but also contributes to cost efficiency and sustainability. Technical Data: Brand: Dixi Model: 80 SLD Press force: 80 tons Drive power: 11 kW, 400 V Feed opening (WxL): 1,040 x 1,110 mm Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size (WxHxL): 1,120 x 1,120 x 1,200 mm Bale weight: depends on material, approx. 500–600 kg Binding: 3-fold, manual Machine dimensions: Length: 4,200 mm (+1,600 mm cage) Width: 1,830 mm Height: 2,620 mm Machine weight: approx. 8,000 kg Bale geometry: optimized for space-saving storage and transport Automatic pressing process & bale ejection Robust construction for long service life Year of manufacture: 2016 Weight: approx. 8.4 tons Condition: used

Condition: good (used), Year of construction: 2011, operating hours: 20,580 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 450 kg, input current: 59 A, overall weight: 12,000 kg, transport height: 2,750 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), transport width: 2,300 mm, transport length: 8,500 mm, tank capacity: 300 l, Good day, We hereby offer you a used baler from the manufacturer HSM, type VK 4812. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Iodot H Rcaspfx Addoal Manufacturer HSM Type VK 4812 Year of manufacture 2011 Operating hours 20,580 hours Main press force 48 tonnes Drive power 30 kW Machine weight press 12 tonnes The machine documentation is available in German. A viewing is possible by appointment in our workshop. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF450 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 450 kg. The baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 30 Ton Bale weight: up to 450 kg (material depending) Bale size: 1000 H (var.) x 1200 W x 800 D mm Machine size: 3000 H x 1781 W x 1196 D mm Machine weight: 1300 kg Transport height: 2300 mm Loading aperture: 1200 W x 680 H mm Cycle times: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Dual cylinders for even compaction of the material User-friendly lever control Bale kicker for easy eject the bales Retainer for reducing the material spring back Reel holder for 4 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Big Bags Clothes Light valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Sliding top door Strapping rolls Motor 11 kW 32 Amp Ijdpfxevamafs Addoal Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: used, Year of construction: 1979, functionality: fully functional, Baler Paal Pacomat II with hopper, year of manufacture 1979 Technical Data: Manufacturer: Paal Model: Pacomat II Year of manufacture: 1979 Drive power: 11 kW Pressing force: 27 t Channel cross-section: 700 x 1000 mm Feed opening: 1000 x 650 mm Throughput: approx. 60/115 m³/h Bale dimensions: 700 x 1000 mm Bale weight: up to 400 kg Machine dimensions: approx. 7000 x 2000 x 2000 mm (LxWxH) Machine weight: approx. 5200 kg Materials processed: Paper, Cardboard, Film Remarks: The machine is in fully functional condition. It was inspected and tested at our site in 28816 Stuhr. Video footage is available on our website or YouTube channel. Inspection, including powered operation, is possible at any time by appointment. Upon request, we can also carry out tests using your material for a handling fee. If you have questions about the machine, we are happy to assist you by phone from Monday to Thursday, 08:00 to 14:00. On Friday, we are available from 08:00 to 13:00. Please note: Iodpex Irvajfx Addjal All technical data is based on manufacturer information. We accept no liability for the information provided or for possible errors. Offers are non-binding, subject to prior sale and may be withdrawn at any time. Inspections are possible by arrangement. Sale is ex location, without warranty or guarantee. Our payment terms are 100% advance payment.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 15,604 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, total width: 1,700 mm, total height: 2,400 mm, total length: 7,800 mm, input voltage: 400 V, input current: 64 A, overall weight: 12,500 kg, transport height: 2,400 mm, power: 30 kW (40.79 HP), year of last overhaul: 2024, volume flow: 160 m³/h, transport width: 1,700 mm, transport length: 7,800 mm, tank capacity: 600 l, Hello, We are offering you a used baler from the manufacturer Presto GmbH & Co. KG, type HPK 50 B, subject to change. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Iasdpfxsuan Hzo Addjl Manufacturer Presto GmbH & Co. KG Type HPK 50 B Year of manufacture 2005 Pressing force of main press 50 t Drive power 30 kW Total connected load 31.5 kW Rated current 64 A Throughput under operating conditions with a bulk weight of 60 kg/cbm approx. 6.7 t/hour Machine weight of press 12.5 t Note: The machine is currently in our workshop for overhaul and is expected to be tested and ready for sale in February. The machine documentation is available in German. A viewing of the press is possible by appointment in our workshop. We would be pleased if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: new, Year of construction: 2026, functionality: fully functional, Waste Baler BTS-MF75 in stock and available straight away The BTS-MF75 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 75 kg. With a can crush insert baler is even suitable for crushing individual sheet metal and plastic containers and also cans. The baling press impresses with its ease of use, safe operation and its large filling volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 3.5 Ton Bale weight: up to 75 kg (material depending) Bale size: 1000 H (var.) x 700 W x 500 D mm Machine size: 2335 H x 1040 W x 750 D mm Machine weight: 278 kg Transport height: 2335 / 1800 mm (on request) Loading aperture: 700 W x 698 H mm Cycle times: 24 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale trolley for removing the bales Retainer for reducing the material spring back Reel holder for 2 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Cans and light sheet metal containers Canisters and light plastic containers Clothes Light valuable materials Optional extras Machine colour RAL Can crusher insert PLC auto compaction cycles with bale full light and E-stop with locking key Strap eject for easy removal of bales Strapping rolls Power supply 380 - 400 V (3 phase) Iedpfevah S Asx Addsal Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: excellent (used), Year of construction: 2016, operating hours: 1,030 h, functionality: fully functional, Baler Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2016 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2016 Operating hours: 1030 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Iajdpfex Irucex Addjl Pressing cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Binding: 3-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, cartons Operating manual is available. Note: The baler is in very good condition. It has been inspected and tested at our location in 28816 Stuhr. The video can be found on our website or YouTube channel. The hydraulic hoses should be replaced. Inspections, including powered demonstrations, are possible at any time by arrangement. Upon request, we will also conduct tests with your material for a nominal fee. We are happy to answer any questions about the machine by phone from Monday to Thursday between 08:00 and 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on manufacturer’s specifications. We do not assume liability for the information provided or any possible errors. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by appointment. Sale is ex works, prepayment required, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, functionality: fully functional, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), empty load weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Isdpfx Adevgrh Ujdeal Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF60HD is the ideal special waste baler for compacting your difficult and hard materials such as Cans, PET, Metal Buckets, Metal Containers, but also Plastic Canister and much more recyclable materials can be compacted easily and safe to a minimum of its size. The special waste baler impresses with its ease of use and safe operation, finished bales can be easily removed with the automatic bale ejector. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 13 Ton Iasdpfx Aevbq Rkeddsl Bale weight: 25 - 60 kg (material depending) Bale size: 650 H (var.) x 600 W x 400 D mm Machine size: 2144 H x 1267 W x 1328 D mm Machine weight: 706 kg Transport height: 2144 mm Loading aperture: 890 H x 600 W x 400 D mm Cycle times: 25 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB Top loading Special Waste Baler User-friendly lever control Automatic bale kicker for easy bale removal Retainers for reducing the material spring back Cross Strapping Tying System to keep difficult materials in bale Reel holder for strapping rolls A quality product “Made in Europe” Suitable for compacting PET bottles Cans and sheet metal containers Canister and plastic containers Cardboard and plastic film and foils Optional Extras Machine colour RAL Strapping rolls Power supply 380 - 400 V (3 phase) Can Compactor, Can Press, PET Compactor, PET Press, Baler PET bottles, PET Bottle Baler, Ballenpresse, Papierpresse, Altpapierpresse, Kartonpresse, Kartonagenpresse, Folienpresse, Papierballenpresse, Abfall-Ballenpresse, Abfallpresse, Presse Wertstoff, Müllverdichter, Müllpresse, Restmüllpresse

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Vertical baler Dixi 50 S, year of manufacture 2019, in very good condition Technical Data Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 50 S Year of manufacture: 2019 Drive power: 7.5 kW Pressing force: 50 t Pressing cycle time: 23 s Filling opening: 1200 x 620 mm Filling height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300–350 kg Tying: manual Transport dimensions: 1600 x 1300 x 2200 mm Isdpfx Adjx Irlhjdeal Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, film, Styrofoam, fleece, glass wool, etc. The operating manual and EC Declaration of Conformity are available in German. Remarks: The machine is in very good condition. It has been inspected and tested at our facility in 28816 Stuhr. The video can be found on our website or our YouTube channel. Viewings, including under power, are possible at any time by appointment. Upon request, we can also conduct tests with your material for a handling fee. If you have questions about the machine, we are happy to answer them by phone from Monday to Thursday from 08:00 to 14:00, and on Friday from 08:00 to 13:00. Please note: All technical data is based on the manufacturer's information. We assume no liability for the details provided or for any errors. Offers are non-binding, subject to prior sale and may be withdrawn at any time. Inspections are possible by prior arrangement. Sale is ex location, without warranty or guarantee.

Condition: reconditioned (used), Year of construction: 2013, operating hours: 18,819 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,085 mm, filling opening length: 2,815 mm, bale length: 1,200 mm, bale width: 100 mm, bale height: 800 mm, bale weight: 400 kg, total width: 3,140 mm, total height: 2,900 mm, total length: 8,840 mm, overall weight: 7,380 kg, transport height: 2,900 mm, power: 9 kW (12.24 HP), year of last overhaul: 2023, transport width: 2,400 mm, transport length: 5,650 mm, Good day, Iodpfx Adot H Rgfedoal We hereby offer you a used baler from the manufacturer Strautmann, type BaleTainer. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Strautmann Type BaleTainer Year of construction 2013 Operating hours 18,819 hours Number of bales pressed 7,019 pieces Pressing force main press 60 tonnes Drive power 9.2 kW Machine weight press 7.38 tonnes The baler was partially overhauled. The piston rods and seal sets of the two main hydraulic cylinders were replaced and general maintenance work such as oil and filter changes etc. was carried out. Finally, after the overhaul work, the machine was tested. The press is equipped with a hydraulic tilting device for loading in order to empty lattice box containers on a truck ramp. For example, the machine can be positioned with the tilting device on a truck ramp. There, the employees can roll the material to the tipping device with a mesh trolley and then have it tipped hydraulically into the baler. The machine can also be loaded from the side via the large feed/storage container using a forklift truck or wheel loader. Conveyor belt loading would certainly also be feasible. The machine documentation is available in German. A viewing is possible by appointment in our workshop. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF450HD special waste baler is the ideal baler for compacting difficult materials such as PET bottles, food cans and metal containers, big bags, plastic canisters and plastic packaging, but also scrap tyres and car bumpers can be reduced to a minimum of volume with the baler. The special baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 30 Ton Bale weight: up to 450 kg (material depending) Bale size: 1000 H (var.) x 1200 W x 800 D mm Machine size: 3343 H x 1781 W x 1196 D mm Machine weight: 1600 kg Transport height: 2300 mm Loading aperture: 1200 W x 680 H mm Cycle times: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Extra-long dual cylinders for even and early compaction of the material User-friendly lever control Bale kicker for easy eject the bales Extra retainer for reducing the material spring back Reel holder for 4 rolls of strapping A quality product “Made in Europe” Suitable for compacting PET bottles Food cans and sheet metal containers Canisters and plastic containers / packaging Scrap tyres and car bumpers Big bags Cardboard and plastic film / foils Other difficult valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Sliding top door Iodpfx Adevug Eksdeal Strapping rolls / bale wire Motor 11 kW 32 Amp Demo-Video shows BTS-MF550HD Special Waste Baler. Can Baler, Can Waste Baler, PET Baler, PET Compactor, Tyre Baler, Tire Baler, Scrap Tyre Baler, Scrap Tire Baler, Tyre Compactor, Tire Compactor, Can Baler, Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Vertical baler Dixi 50 S, year of manufacture 2020, in very good condition Technical data Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 50 S Year of manufacture: 2020 Drive power: 7.5 kW Pressing force: 50 t Press cycle time: 23 s Filling opening: 1200 x 620 mm Filling height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300–350 kg Ijdpex Irk Dsfx Addsal Binding: manual Transport dimensions: 1600 x 1300 x 2200 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, film, polystyrene, fleece, glass wool, etc. The operating manual and EC Declaration of Conformity are available in German. Note: The machine is in very good, as-new condition. The seals on both cylinders for the retaining clamps have been replaced. The machine has been inspected and tested at our facility in 28816 Stuhr. You can find the video on our website or our YouTube channel. Inspections, including under power, are possible at any time by prior arrangement. Upon request, we also conduct tests with your material for a processing fee. If you have any questions about the machine, we will be happy to assist you by phone from Monday to Thursday between 8:00 am and 2:00 pm. On Fridays, we are available from 8:00 am to 1:00 pm. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or for possible errors. Offers are subject to change, prior sale reserved, and can be revoked at any time. Inspections are possible by appointment. Sale is ex works, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, functionality: fully functional, pressing force: 85 t, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 650 kg, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Iaedjv T I Evepfx Addol Your service team at Mertens & Frowein GmbH

Condition: new, Year of construction: 2026, The BTS-Plastic Foil Compactor is the solution to keep large bulky packaging film under control. With its space-saving footprint and secure stand you can easily reduce all foil waste to a minimum of volume. The retaining ring in the plastic foil compactor prevents annoying expansion so that the foils stay where they belong. The filled bags can be baled by using a waste baler or disposed of in a recycling bin. By collecting and compacting this valuable and recyclable material you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Foil Compactor size: 1000 H x 450 W x 420 D mm Foil Compactor weight: 5.5 kg Foil Compactor colour: RAL 9006 silver Foil Compactor Bag volume: 240 Ltr. Foil Compactor Bag weight capacity: up to 15 kg Easy collecting the packaging films Clean and safe working environment Retaining ring prevents the annoying material expansion of the foils Optimum utilization of bags Reduces frequency of waste collection A quality product “Made in Germany” Suitable for collecting and compacting Iaedpfx Asvbrfcjddjl Bulky packaging films and foils Foam foils Optional extras BTS-Foil Bags 240 Ltr. Plastic Foil Compactor colour RAL (minimum order 40 units) BTS-Waste Baler for plastic film and foils Plastic Film Compactor, Foil Compactor, Plastic Film Collector, Foil Collector, Sack Holder

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Vertical Baler Dixi 50 S, Year of Manufacture 2019 Technical Specifications Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 50 S Year of Manufacture: 2019 Drive Power: 7.5 kW Pressing Force: 50 t Pressing Time: 23 s Filling Opening: 1200 x 620 mm Filling Height: 1000 mm Bale Size: 1200 x 800 x 830 mm Bale Weight: 300–350 kg Tying: Manual Transport Dimensions: 1600 x 1300 x 2200 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, film, Styrofoam, fleece, glass wool, etc. The operating manual and EC Declaration of Conformity are available in German. Remarks: The machine is in very good condition. It has been inspected and tested at our Stuhr location (postal code 28816). You can find a video of the machine on our website or on our YouTube channel. Viewings, including under power, are possible at any time by prior arrangement. On request, we can also carry out test runs with your material for a handling fee. Iajdex Irimopfx Addol We are happy to answer any questions you may have about the machine by phone from Monday to Thursday between 08:00 and 14:00, and on Friday from 08:00 to 13:00. Please note: All technical details are based on manufacturer information. We accept no liability for the accuracy of the provided data or for any errors. Offers are subject to change without notice, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale ex works, without warranty or guarantee.

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF200MK is the ideal multi chamber waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 200 kg. Various materials can be collected into two or more chambers installed next to each other and once a chamber is filled the rollable compaction head will be moved over and the material can be baled. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 16 Ton Bale weight: up to 200 kg (material depending) Bale size: 1000 H (var.) x 1100 W x 800 D mm Machine size: 2506 H x 3260 W x 1269 D mm Machine weight: 1400 kg Iasdpova Hupefx Addsl Transport height: 2506 mm Loading aperture: 1100 W x 800 H mm Cycle times: 34 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale trolley for removing the bales Short processing time because there is always a chamber available for loading Retainer for reducing the material spring back Reel holder for 8 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Big Bags Clothes Light valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Extra chamber (up to 6 chambers in total) Strapping rolls Twin Chamber Waste Baler, Multi Chamber Waste Baler, Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: good (used), Year of construction: 2018, operating hours: 40,350 h, functionality: fully functional, Baling Press Presona LP 85 VH2 with Cross Tying, Year of Manufacture 2018 Technical Specifications: Manufacturer: Presona Sweden Model: LP 85 VH2 Year: 2018 Drive Power: 2 x 45 kW Operating Hours: 40,350 Effective Operating Hours: Approx. 22,000 Pre-press Force: 28 t Main Press Force: 85 t Feed Opening: 1500 x 1100 mm Isdex Irigepfx Addjal Bale Dimensions: 750 x 1100 mm Bale Weight: 450–650 kg Theoretical Throughput Volume: 1,200 m³/h Throughput Capacity at 30–100 kg/m³: 13–30 t/h Tying: 5-fold vertical, 3-fold horizontal Oil Tank Capacity: 2,000 L Press Transport Dimensions: 10,400 x 2,400 x 2,800 mm (LxWxH) Weight: Approx. 27,000 kg The press was removed from ongoing operation. A spare parts package is included in the scope of delivery. Technical documentation is available. Please note: All technical data refer to the manufacturer’s information. We do not assume liability for the specifications provided or for any errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Viewings are possible by appointment. Sale only by advance payment, ex works, without warranty or guarantee.

Condition: new, Year of construction: 2026, functionality: fully functional, The BTS-MF40 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 40 kg. The baling press impresses with its ease of use, safe operation, it is ideal for small material volume and producing compact and easy-to-handle bales. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 2 Ton Bale weight: up to 40 kg (material depending) Bale size: 600 H (var.) x 535 W x 460 D mm Machine size: 1756 H x 718 W x 644 D mm Machine weight: 187 kg Transport height: 1756 mm Loading aperture: 522 W x 490 H mm Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Iasdsvahudopfx Addel Bale trolley for easy bale removal Retainers to prevent material spring back Reel holder for strapping rolls A quality product „Made in Europe“ Suitable for compacting Cardboard Plastic film and foils Cans and light sheet metal containers Canisters and light plastic containers Clothes Light valuable materials Optional Extras Machine colour RAL Can crusher insert PLC auto compaction cycles Strapping rolls Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: reconditioned (used), Year of construction: 2009, operating hours: 15,350 h, functionality: fully functional, Europress EP 6500 V5 H4, Cross Tying, Year of Manufacture 2009 Technical Specifications: Manufacturer: Europress Model: 6500 V5 H4 Year of Manufacture: 2009 Operating Hours: approx. 15,334 hours Number of Bales: 138,097 bales Main Press Force: 120 t Specific Press Force: 142 kg/cm² Feed Hopper Dimensions: 1,650 x 1,100 mm Filling Volume: 3 m³ Filling Volume per Press Cycle: 1.58 m³ Bale Dimensions: 730 x 1,100 mm Drive Power: 75 kW (1 x 30 kW + 1 x 45 kW, individually switchable) Total Connected Load: 83 kW Current Consumption: 150 A Tying: 5-fold vertical, 4-fold horizontal, fully automatic Bale Weight: 450–900 kg Hydraulic Tank Capacity: 1,200 L PLC Control: Siemens S7-200 Control Panel: Siemens Touchscreen Press Dimensions (assembled with hopper): 13,465 x 5,200 x 5,074 mm Transport Dimensions Press: 9,965 x 2,500 x 2,900 mm (L x W x H) Press Weight: approx. 28 t Work Carried Out on the EP 6500 V5: - Completely derusted and repainted - Inner steel floor of the press completely renewed - Ram (steel structure) overhauled - Complete overhaul of the horizontal and vertical lance boxes - Complete renewal of internal Hardox wear plating - All hydraulic hoses new - Both hydraulic cylinder lifters renewed - Knives and counter knives replaced - All hydraulic cylinders resealed and tested - All slide and guide plastics replaced - Wire deflection pulleys renewed - Replacement of various cables and sensors - Replacement of various electrical components (control cabinet) - Complete inspection of electrics/control system - Complete hydraulic pressure inspection Remarks: The machine has been overhauled, inspected, and tested by us. You can find the video on our website or YouTube channel. Inspections, including powered tests, are possible at any time by prior arrangement. If you have any questions regarding the machine, we are happy to assist you by phone Monday to Thursday from 08:00 to 14:00, and Friday from 08:00 to 13:00. Please note: Iasdpfx Aex Irh Noddsl All technical data is based on information provided by the manufacturer. We do not accept liability for the accuracy of the information or for possible errors. Offers are subject to change, prior sale, and withdrawal at any time. Inspections are possible by prior arrangement. The sale is ex location, without any warranty or guarantee.

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF300LH is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 300 kg. Due to the compact design and low height of under 2 meters this baler is perfect for rooms with limited ceiling heights. The baling press impresses with its ease of use, safe operation and its large filling volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 20 Ton Bale weight: up to 300 kg (material depending) Bale size: 1100 H (var.) x 1200 W x 800 D mm Machine size: 1986 H x 1800 W x 1100 D mm Machine weight: 1140 kg Transport height: 1986 mm Loading aperture: 1200 W x 600 H mm Cycle times: 45 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB Auto control panel with bale full light and E-stop with locking key Strap eject for easy removal of bales Retainer for reducing the material spring back Low height, perfect for limited ceiling heights Hour counter Reel holder for 4 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Big Bags Clothes Light valuable materials Iaodpfx Adjiwgcmedsl Optional extras Machine colour RAL Strapping rolls Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF75MK is the ideal multi chamber waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 75 kg. Various materials can be collected into two or more chambers installed next to each other and once a chamber is filled the rollable compaction head will be moved over and the material can be baled. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 3.5 Ton Bale weight: up to 75 kg (material depending) Bale size: 700 H (var.) x 700 W x 500 D mm Machine size: 2005 H x 2050 W x 872 D mm Machine weight: 562 kg Transport height: 2005 mm Iaedpfx Adeva Hq Dsdel Loading aperture: 700 W x 500 H mm Cycle times: 35 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale trolley for removing the bales Short processing time because there is always a chamber available for loading Retainer for reducing the material spring back Reel holder for 4 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Cans and light sheet metal containers Canisters and light plastic containers Clothes Light valuable materials Optional extras Machine colour RAL Can crusher insert PLC auto compaction cycles with bale full light and E-stop with locking key Extra chamber (up to 6 chambers in total) Strapping rolls Power supply 380 - 400 V (3 phase) Twin Chamber Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor