Used Beverage production for sale (924)

Condition: used, Year of construction: 2021, Overview  This isobarometric filler was built in 2021 by the German manufacturer Markl. It can fill cans abd glass bottles. Together with this filler it comes a can seamer brand Lubeca and also manufactured in Germany. This filler is available because the seller is selling the complete equipment. It has only a few operating hours and can be viewed in person at any time.   Technical Details  Capacity: 8,000 bottles / hour (depending on format) Formats: bottle 330 ml, 750 ml, can 330 ml, 440 ml Counter-pressure filler Running direction: left - right Can seamer Lubeca LW504 (2022) included Dob Hl Rmst Rmhmstscg

Condition: used, Year of construction: 2015, Overview This brewhouse from the Spanish brand Slowbeer, manufactured in 2015, with a capacity of 500L is still being used in the seller's factory. It is fully functional and can be seen and tested in person. It operates with a thermal oil heating system. Scope of Delivery 500L brewhouse Control panel Boiler 1000L hot and cold water tanks Deb Hl Rmstyrp Notjcg

Condition: used, Year of construction: 1999, Overview This filling line for carton packaging from 1999 consists of a SIG Combiblock filler, accumulation system, straw applicator, shrink tunnel, and carton packer. The line currently fills juices into carton packs. The machines will be in operation until the end of June and can be viewed in person at any time. One will be free in June, one in October Technical details Output: 12,000 bottles per hour Volume: 200ml Packaging: cardboard, CB7 (feeder) Format shrink tunnel: 2x5 Carton packer format: 30 pack / 60 pack Machine list Filler | SIG | Combibloc CFA 712 | 1999 | Operating hours: 112.650 h Vertical accumulation system | Meurer | CM/ VSP 1200 | 1999 Straw applicator | Geyssel Cologne | 432 | 1999 Shrink tunnel | Meurer | CM/ BK 40-T80 | 1999 Carton packer | Meurer | CMT/ TP | 1999 Shrink tunnel | Meurer | CM/ BK 40-T80 | 1999 Carton packer | Meurer | CMT/ TP | 1999 Deb Hl Rer It Stomtscg

Condition: used, Year of construction: 1999, Overview This filling line for carton packaging from 1999 consists of a SIG Combiblock filler, accumulation system, straw applicator, shrink tunnel, and carton packer. The line currently fills juices into carton packs. The machines will be in operation until the end of June and can be viewed in person at any time. Technical details Output: 12,000 bottles per hour Volume: 200ml Packaging: cardboard, CB7 (feeder) Format shrink tunnel: 2x5 Carton packer format: 30 pack / 60 pack Machine list Filler | SIG | Combibloc CFA 712 | 1999 | Operating hours: 112.650 h Vertical accumulation system | Meurer | CM/ VSP 1200 | 1999 Straw applicator | Geyssel Cologne | 432 | 1999 Shrink tunnel | Meurer | CM/ BK 40-T80 | 1999 Carton packer | Meurer | CMT/ TP | 1999 Djb Hl Rmsr It Swstocg

Condition: used, Year of construction: 2004, Overview  The blowing machine was manufactured by Sidel in 2004 and has only been used by a mineral water company. The machine has been regularly maintained and is in good condition. The seller bought a bigger machine, therefor this machine is available for sale. Technical Details  Capacity: 9,600 bph with 1.5 l and 12,000 bph with 0,5 l Number of cavities: 8 Formats / moulds included: 1,5l Bottle neck: PCO 1881 and 29/25 Additional equipment  Preform kipper Preform hopper Preform feeder Dcsb Hljthyqaj Rmtog

Condition: used, Year of construction: 2007, Overview  The water treatment plant consist of an activated carbon filter, a UV treatment and a reverse osmosis system. Additionally it is combined with a SIP cleaning system. The unit was installed and designed in 2007 by PWT. Since then it has only been used a couple of times, in total less than 100 operating hours. The system is still installed, under power and can be demonstrated. Technical details  Capacity: Currently installed: 6,000 l/h Can be upgraded up to 20,000 l/h GEA plate heat exchanger Schärf u. Schall activated carbon filter WEDECO BX50 UV Reactor Integrated SIP system Dceb Hl Rmetka Aiotog

Condition: used, Year of construction: 1998, Overview This tumbler, type: Injectstar Magnum 1500 is the perfect massaging Unit in a space-saving compact design for processing all types of meat with and without bones. Equipped with loading unit for 200l bins and integrated cooling aggregate. Technical Details Volume of the machine 1500 liter massaging capacity 675 kg Computer control of working and pause mode Automatic loading Automatic unloading Vacuum 0 – 95 % Vacuum system with filter Width 2 800 mm Length 1 500 mm Height 1 950 mm Installed power: 4,7 kW Voltage: 380 V, 50 Hz Weight 1000 kg Scope of delivery Tumbler with cooling and loading| Injectstar | Magnum 1500 | 1998 Deb Hl Rmjumzpketocg

Condition: used, Year of construction: 2005, Overview This PET bottling line was used in a factory in Denmark. It was continuously used and maintained therefor the overall condition of the line is good. The line is in operating condition. Technical data Capacity: 12,800 bph at 2,0l Formats: Bottles: 0,5l 1,0l 1,5l 2,0l Cap: 28mm PCO 1881 Shrink only:6 pack for each botte format Pallet: Europallet and half pallet List of machines Blow moulder| KRONES | Contiform S8 | 2005 Preform kipper | KRONES | 2005 Preform alimentation and feeding | KRONES | 2005 Air conveyors | Krones | Airco | 2005 Rinser Filler Capper | Krones | Mecafill | 2005 Cap Alimentation | Gassner | 2005 Cap- Fill level inspection | KRONES | Checkmat 731 | 2005 Mixer | KRONES | MSF 24/2 | 2005 Flash Pasteurizer | KRONES | 2005 Labeller | KRONES | Multimodul with Contiroll station | 2005 Date coder | Inkjet | Excel 1701 | 2005 Bottle conveyors | Krones | Synco | 2005 Shrink Packer | KRONES | Variopac FS-30 | 2005 Date coder | Videojet | VJ1610 | 2009 Tray conveyors | KRONES| Multico | 2005 Handle applicator | Twinpack | MDE | 2007 Palletizer | KRONES | Pressant | 2005 Stretch Wrapper | Haloila | Octopus | 2005 Pallet labeller | Logopak | 920-II-PFRK | 2007 Pallet labeller | Logopak | VLP-210-II-F | 2008 Pallet conveyors | KRONES | Palco | 2005 Deb Hl Rmouzphfotscg

Condition: used, Year of construction: 2022, Overview Most of the equipment, which belongs to this brewery, was manufactured in 2021 and 2022. There are several components which have never been used. The owner had purchased all the equipment to set up a micro brewery but then decided to shift the production of his beer to a bigger brewery, producing for him. Therefore all the equipment is for sale. List of components Manufacturer: Bühler AG Machine Type: malt mill Model: Smartgrist YOM: 2022 (used since February)   Manufacturer: Spadoni Machine Type: 25 hl brew house Model: RMB 2500 YOM: 2022 (not used yet) Capacity: 25 - 30 hl in one brewing process, two processes possible in ten hours   Manufacturer: ABC Perello Machine Type: steam generator Model: PMY - 12 YOM: 2022 (not used yet) Capacity: 1250 Kgv/h   Manufacturer: --- Machine Type: water softener Model: --- YOM: 2022 (used since January)   Manufacturer: Isma S.A. Machine Type: vertical water tank Model: --- YOM: 2022 (used since June) Capacity: 50,000 l   Manufacturer: Spadoni Machine Type: vertical insulated water tank (hot water) Model: --- YOM: 2021 (not used yet) Capacity: 15,000 l   Manufacturer: Spadoni Machine Type: vertical insulated water tank (cold water) Model: --- YOM: 2021 (not used yet) Capacity: 15,000 l   Manufacturer: Spadoni Machine Type: fermentation tanks Model: --- YOM: 2021 (not used yet) Capacity: 12,500 l x 7 (seven tanks included)   Manufacturer: Spadoni Machine Type: fermentation tanks Model: --- YOM: 2021 (used since March) Capacity: 15,000 l x 3 (three tanks included)   Manufacturer: Sefiltra Machine Type: tangential filtering equipment Model: CF4 - S SEF + SGG YOM: 2021 (used since November 2021)   Manufacturer: --- Machine Type: gangway, stairs, etc Model: --- YOM: 2021    Manufacturer: Noxerior Machine Type: nitrogen generator Model: NS-21 YOM: 2022 (not used yet)   Manufacturer: Taeevo Tech Machine Type: cooling unit Model: TAE-381-P3 YOM: 2022 (used since June)   Manufacturer: --- Machine Type: pumps Model: --- YOM: 2021 - 2022   Manufacturer: Agrovin Machine Type: liquid dosing unit Model: Agatha PRO YOM: 2021 (not used yet) Capacity: 12,500 l x 7 (seven tanks included)   Manufacturer: Kuka (Nownology) Machine Type: robot depallatizer Model: KR240PA YOM: 2022 (not installed yet) Capacity: 15,000 bph   Manufacturer: Nagema Machine Type: rotary counter pressure filler Model: 40/10 (40 valves and 10 capping elements) YOM: 1990 (completely modernized in 2022, not used yet) Capacity: 10,000 bph Formats: 0,33 l and 0,5 l   Manufacturer: Heuft Machine Type: Fill level inspection Model: --- YOM: 2022 (not used yet)   Manufacturer: Twin Monkeys Machine Type: linear can filler Model: Cimarron / 5 YOM: 2021 (used since November 2021) Capacity: 3,000 cph Formats: div.   Manufacturer: Enos Machine Type: labeller for self adhesive labels Model: S5000 YOM: 2022 (not installed yet) Capacity: 5,000 bph number of labelling stations: 2 Three machines available (one for cans, two for glass bottles)   Manufacturer: SMI Machine Type: wrap around packer Model: WP300 YOM: --- (completely modernized in 2022, not used yet)   Manufacturer: Kuka (Nownology) Machine Type: robot palletizer for cartons Model: KR240PA YOM: 2022 (not installed yet) Capacity: 15,000 bph Dsb Hl Rmeuzph Estjcg

Condition: used, Year of construction: 2023, Overview This is a new brewhouse, which has already been partially completed. If necessary, the brewhouse can be completed within 3-4 months. It has a fully automatic control with the option to reduce to semi-automatic Technical data Maximum quantity of malt 350 k g / 1 brewing run of 10 hl Original gravity up to 22 ° Heating system with steam multipliers Steam requirement: 150 kg / h Heating capacity in the mash tun / wort kettle: 1°C / min and faster Temperature of cold wort 6 ° C (adjusted according to customer requirements) Wort cooling within 50 min. Number of brewing passes during infusion mashing: 3-4 Stainless steel operational platform Scope of Delivery Malt handling and milling system incl. Malt mill, malt tank and transport Brewhouse with 3-vessel-system consisting of:  Hydrator Mash tun with net volume of 10 hl Lauter tun with net volume of 15 hl Whirlpool with net volume of 10 hl Hot water tank with net volume of 24 hl Cold water tank with net volume of 14 hl Wash basin with sample cooler Vapor condensate system Steam generator plant Compressor station Fermentation tank 10 hl, insulated Fermentation tank 20 hl, insulated Storage tanks for tapping 500l Storage tanks for tapping 1000l Control for temperature in fermentation tanks Glycol cooling unit Mobile CIP pump Mobile CIP station KEG semi-automatic washer and filler Hopper for dry hopping Dcob Hlsuzpive Rmteg

Condition: used, Year of construction: 2023, Overview  The Wild Goose Dual Lane EVO - EU 10 filling line is an automated can filling machine. The line features automatic lid placement, a CO₂ purge station and patented sealing and capping systems to reduce oxygen ingress.  Technical details  Output: 100 cans/min  Dimensions: 3317 mm length x 1041 mm width x 2769 mm height (height 2286 mm without lid tubes) Weight: approx. 635 kg Electrical power: Three-phase, 200V-240V, 18A at 208VAC, 50/60 Hz Compressed air requirement: Clean, dry compressed air at 6.2 bar and 650 l/min; requires air dryer and coalescence filter Lid placement: Automatic, with intelligent lid detection system Filling station: Automatic CO₂ flushing and filling Dcob Hl Rju H R Nujmtjg

Condition: used, Year of construction: 2003, Overview The blowmoulder was built in 2003 by the manufacturer SIPA. The machine is still in operation and can be visited. It is used in a mineral water factory. The blowing machine is in good condition due to regular maintenance and technical upgrades, which have been well documented. Technical data  Nominal capacity: 24,000 bph for each format Nr. of moulds: 20 Last used formats: 0,33l (2 sets) 0,4l 0,5l (4 sets) 0,75l (2sets) 1,0l Dimensions: 7600 x 4200  x 4400 Weight of empty machine: 18,5t Weight of full machine, working condition: 24,5t Blowing air recovery system Overhaul for about 200,000 € recetly performed 161800 operating hours Scope of delivery  SFR 20 Preform feeder Preform hopper Spare parts vrious sets of moulds Documentation Program backup Dceb Hsu Nph Isl Rmteg

Condition: used, Year of construction: 2018, Overview  The Gruber AFD6 is a filling machine for bottles and party KEGs that was produced by the German manufacturer Gruber in 2018 and has an operating time of 725 hours. The machine is available immediately. Technical details Output 800 bph (at 0.33l) 750 bph (at 0.5l) 600 bph (with 1.0l) 400 bph (for 2.0l) 240 bph (with 5.0l party KEG) Output varies depending on CO2 content and beer temperature (in practice, 1,000 bph could be achieved at 0.33l) Long tube filler with 6 filling points Fully automated filling process Single or double CO2 flushing Siemens S7 control system with touch panel Operating hours: 725 hours Dob Hl Rou I Hr Uemtscg

Condition: used, Year of construction: 2014, Overview  This 20HL brewhouse was built in 2014 by Spanish manufacturer INOX DUBRA. It can be visited at any time.    Technical Details Rash wort: 20 HL  Steam heated   Electric panel to control both pumps and heating temperature  Opening of valves done manually   Scope 2 vessel brewhouse   1x water tank 3300L with cooler   Heat exchanger  Accessories as different hoses, two pumps, etc.   Djbeukafxs Hl Rmtecg

Condition: used, Year of construction: 2008, Overview  The machine was built in 2008 by the former manufacturer SIG Corpoplast (now KHS). The machine is still in operation and can be inspected at any time. Technical data Capacity: last 21.115 bph (at 1,5l)  Formats: 500ml, 750ml, 1.000ml, 1.500ml  PCO 1881  Operating voltage: 400V/ 50 Hz   Control voltage: 24 VDC  Scope of delivery  Blow molding machine | SIG Corpoplast | BLOMAX 12 | 2008  Preform feeder | Transver AG | - | 2008 Silo  Elevator  Sorting Chute Dcobsplgmbo Hl Rmtjg

Condition: used, Year of construction: 2013, Overview  The labeler was manufactured in 2013 by the German manufacturer Gernep. The machine was regularly maintained by OEM and had a full renovation in the end of 2019. The labeler is already dismantled. Technical details  Output: approx. 8,500 bottles/h   Formats 33 cl Vichy – Longneck – 30 cl BNR ; Neck, front and back label. 2 different front label format parts 33 cl longneck; 75 cl Bierre Belge bottle Corked; Neck, front and back label. Stainless steel bottom frame Rotation: clockwise Right to left bottle transport 5912 running hours Air driven glue pumps replaced by electrical driven glue pumps. Dcjb Herb Stmol Rmtsg

Condition: used, Year of construction: 2015, Overview The tray packer was built in 2015 by Italian manufacturer Atlanta. The machine is in a good condition, already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 15 trays per minute Specifications: Currently entry on single lane Full set of new parts for entry on double lane included in supply For carton thickness: 2 to 5 mm Flap closes from the bottom Current configuration:             for bottles PET 0.25L & 0.50L 4 packs/tray in 3x4 for 0.25L bottles 4 packs/tray in 2x3 for 0.50L bottles in carton neutral or printed Machine control: Siemens S7 touch screen Machine equipped with entry & exit conveyors Dcob Hlsrkgzke Rmtjg

Condition: used, Year of construction: 2019, Overview  This 40-foot refrigerated container was manufactured in January 2019 and is in very good condition. It has a refrigeration system that allows temperatures from -30°C to +30°C and is equipped with a 32 A power connection. The container shows minimal damage and was last serviced in December 2021. The unit works perfectly and the interior is illuminated. The container is easy to clean thanks to the Easy Clean Paint. Technical details  Year of construction: 01/2019 Maximum load capacity: 29,560 kg Tare weight: 4,440 kg Cooling range: -30°C to +30°C Coolant: R 134a Power connection: 32 A heavy current Last maintenance of the cooling system: 12/2021 Interior lighting  Easy cleaning with Easy Clean Paint  Dceb Hl Rouwz Hrsmtjg

Condition: used, Year of construction: 2014, Overview  This complete isobaric filling line was produced in 2014 by the Italian manufacturer Eurostar and is located in Mexico. The line consists of a triblock (rinser, filler and capper), self-adhesive labeler and conveyor belts. It is being sold because a new line with a higher capacity has been purchased. It has already been dismantled. Technical Details  Capacity: Max 6,000 b/h Formats: 0.210L, 0.355L, 0.500L glass bottles 26mm metal crown caps Dimensions: Width: 5,300 mm Depth: 2,630 mm Height: 2,860 mm Weight: 8,000 kg POWER SUPPLY: Main: 460V – 60Hz – 3F+N+T Auxiliary: 24V DC Machine main motor: 4 kW Installed power: 9 kW Scope of Delivery  Triblock (rinser, filler, and capper) Selfadhesive Labeller with 2 stations Conveyors Dceb Hl Rsvm U Dljmtjg

Condition: used, Year of construction: 2022, Overview This continously crate washer, type: Nowicki MPP-150P was built in 2022 in EU.  for washing E1, E2, E3 crates with a maximum size of 600 x 460 x 420 (length x width x height). Water heating system: steam Also suitable for the bowls and GN 1/1 containers. Stainless steel construction Width (adjustable) min. : 200 mm / min. height: 50 mm Closed water circulation with filter Automatic dosing pump High-pressure nozzles adjustable in angle Display Regulation and control of temperature up to +65 C  On/Off Pump Automatic/ Manual mode Setting time and date Nozzle pressure adjustment: up to 4.5 bar Service Mode Water-resistant, IP 67 Technical Details Capacity: max.150 crates/ hour Height: 1820mm Width: 1057mm Length: 2629mm Scope of delivery continously crate washer | Nowicki | MPP-150P | 2022 Dceb Hl Revnl T Homtog

Condition: used, Year of construction: 2005, Overview This electric heated cooking kettle, type: Reich K300E was built in 2005 in Germany. Construction: Completely stainless-steel, fully isolated. Technical Details Heating: Electric 24 KW Simple Control Outside dimensions: Width: 125 cm, Depth: 117 cm, Height: 92cm Bottom design Condensation cover Scope of delivery Cooking kettle| Reich | K 300E | 2005 Dsb Hl Rmjvtrubjtecg

Condition: used, Year of construction: 2008, Overview  The filler and capper block was manufactured in 2008 by the Italian company CFT. This machine can be used to fill edible oil into various containers (PET bottles or aluminum canisters).  Techn. details  Filler | CFT | RVAR 6/10 | 2008  Filling temperature: 10-30°C  Number of filling stations: 6  Processable formats:  Tinplate canisters: 1l, 3l, 5l PET bottles: 1l, 2l, 3l, 5l, 10l  Output:  3,500 bph - 1L PET Filling opening. 20 mm 3.000 bph - 2L PET with filling opening 28 mm 2,500 bph - 3L PET with filling opening 32 mm 2.500 bph - 5 L PET filling opening 40 mm 2,200 bph - 5 L perforation 32 mm 1,100 revolutions per hour - 10 L PET hole 40 mm Filling accuracy 1 σ = 0.6 g Machine pitch diameter 720 mm Machine pitch 377 mm Max. diagonal treatable container 220 mm Max. height of treatable container 460 mm Capper | CFT | TA / 3 | 2008  Application of plastic caps  Machine pitch 377 mm Diameter 360 mm Number of capping heads 3 Including feeder for the capping heads Djb Hlomrpv Dj Rmtocg

Condition: used, Year of construction: 2005, Overview This blowmoulder was manufactured in 2005 by Italian manufacturer SMI. Techn. Data 14 cavities Formats: 0,5 – 2,0 l, round, squared Scope of delivery Blowmoulding machine SMI SR14 Chiller ASKI year 2005 Preform tipper Preform feeder Dcjbom U R Dho Hl Rmteg

Condition: used, Year of construction: 2000, Overview  The rinser cleans and sterilizes containers and was built in 2000 by the German manufacturer Krones. The machine has already been disassembled and put into storage.  Technical details  Capacity: up to 32.000 containers/ h  Number of rinsing stations: 50 (some of them are missing)  Running direction: counterclockwise Container: glass + plastic  Wetted parts in V2A  Central lubrication Extensive documentation available Electropneumatic valve control Siemens S7 control Voltage: 400 / 230 V Frequency: 50 Hz Control voltage: 24 V DC Deb Hl Rmsn S A R Sstjcg

Condition: used, Year of construction: 2007, Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Direction of flow: clockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW Dcjb Hleqqz T Hs Rmtsg