Used Beverage production for sale (913)

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Cgebol Hx Ads Exiaaot

Condition: used, Year of construction: 2007, Overview The solo screw capper was manufactured and taken into action in 2007 by Adelski. So far the machine was used in a winery in Germany. The machine is becoming free, as the products which have been produced on that line have been shifted to another filling line. Besides the solo screw capper there is the cap feeding and orientating system, which belong to the scope of supply. The screw capping elements will be kept at the production facility as these will be used in another machine. On request we can offer suitable screw capping elements. Tech Specs: Capacity: up to 12,500 bph Number of capping places: 5 Working direction: counter clockwise Control: Siemens S7 Accessories: Pneumatic cap feeding system Cap orientation system for long caps   Csb Esl Hx Awsxiaaegt

Condition: used, Year of construction: 2007, Overview  The filling line for gable top packaging was manufactured in 2008 by the Norwegian company Elopak. It consists of a carton filler, cap applicator, and packer. The filling line is still installed, but no longer connected. However, it can be inspected in person. Technical Details  Capacity: 8,000 cartons/ h Formats: 0,5l 0,75l 1,0l Operating hours: 32,500 Scope of Delivery  Aseptic Carton Filler | Elopak | S-PS80HA | 2008 3x Cap Applicator | Elopak | PLA-S30 | 2009 Tray Packer | OYSTAR A+F | Traypacker TF | 2011 Cgsb Exiaoty Ddxeaet

Condition: used, Year of construction: 2016, Overview  This labeller and atmospheric filler with capper were both manufactured in 2016. The filler is from Italian manufacturer Alfatek and the labeller is from Spanish manufacturer ENOS. The machines are for sale because the owner has switched his production to KEGs and therefore no longer needs it. The machines are installed and operative in the owner's factory, as shown in the photos. It can be visited and tested in person. Technical details  Filler & Capper | Alfatek | MBC 7/1 LP | 2016 Capacity: 1,000 bph with 0,75l 7-valve filling at 1 bar Filling with inert gas (such as CO2 or N2) to eliminate oxygen Crown capper with single-head adapters for 26 mm and 29 mm Certified as atmospheric Formats used: 0.33l, 0.5l, and 0.75 liters Dimensions of the filling machine: 180cm long 120cm wide 220cm high Labeller | Enos | Compatta | 2016 Capacity: 1,800 bph with shrinking head 1,200 bph with rolling head Automatic lot and expiry date printer by ZANASSI 3 label stations (Front, Back, Neck) Dimensions of the labeling machine: 200cm long 130cm wide 180cm high Cgeb Exietzg Ihoaajt

Condition: used, Year of construction: 2021, Overview This meat grinder for fresh and frozen meat, type: Laska WW 200-H was built in 2021 in Austria. It is a demo-machine with less working hours (180 hours). The machine is equipped with column loader for 200l trolleys. Throat height: 750 mm Hopper capacity: 385 liters, geometry optimized for complete emptying, screw with high rotations for regular feeding of large pieces – hinged flap for removing the screw, Double sealing system on the drive shaft for better hygiene, Extendable step with protection for better access to the loading hopper, Automatic regulation of rotational speed for the feeding screw and working screw depending on the torque. Automatic stop of the grinding screw in case of product absence, protecting the machine and preventing premature wear of the cutting unit. Electric cabinet integrated with the machine with internal ventilation reducing the risk of condensation. Operator panel with control buttons (start/stop, emergency stop) for easy operation. Throat cover with safety sensor and lock. Technical Details Throat diameter: 200 mm Power supply voltage: 400 V Electric power of the working screw drive motor: 43 kW Capacity: Fresh meat +4 degrees Celsius: 6000 kg/h (final sieve 3 mm); 9500 kg/h (final sieve 5 mm); 11000 kg/h (final sieve 8 mm); Frozen meat -18 degrees Celsius (pre-shredded blocks): 2500 kg/h (final sieve 3 mm); 3100 kg/h (final sieve 5 mm); 3500 kg/h (final sieve 8 mm) Dimensions (length x width x height): 2200 x 2000 x 2400 mm Weight: approx. 2000 kg IP56 protection class (protection against water jets and dust) Scope of delivery Grinder | LASKA | WW 200-H | 2021 Cjb Exiet H T Apsaaegt

Condition: used, Year of construction: 1997, Overview   The filling line for cups was built by HAMBA in 1997, is still in operation until the end of 2024 and can be inspected at any time.   Technical data Output: 20 - 40 cycles/min   Products that can be packed:   Liquid yoghurt milk, 0.3 to 4% fat (20-45°C)   Stirred yoghurt with fruit, max. edge length of fruit pieces 15mm, 0.3 to 4% fat (3-10°C)  Cream, 25 to 35% fat (3-42°C)  Salad dressings with salt, herbs and vinegar  Pudding, sweet (2-70°C)  Cup formats:  Cup diameter: 75 mm   Max. Height 120 mm   Filling ranges:   50 ccm to 250 ccm filler with fruit dosing  30 ccm to 150 ccm filler with fruit dosing  Closure: sealing lid   Control Siemens S7   Scope of delivery  Filling machine | HAMBA | BK 8008 A | 1997  Tray erector | Schäfer and Flottmann | SFS 337 | 1997  Empty crate conveyor | Manex | - | 1997  Packer | AF | - | 1997  Integrated in SIG HAMBA BK 8008 P system  Good maintenance condition  Full crate conveyor | Manex | - | 1997  Layer palletizer | Manex | - | 1997 (revision 2004)  Csb Exot Uw E Doiaajgt

Condition: used, Year of construction: 2012, Overview The crater & decrater Linapac II was built in 2012 by German manufacturer Krones. The column was replaced by a new one in April 2021. Techn. Details Formats 3x4 (0,75 lt – 1,00 lt) 4x5 (0,5 lt) 6x12 picking heads Automatic format change Cgjb Eou Huykjxiaaet

Condition: used, Year of construction: 2019, Overview  The inspector “Linos S2” was manufactured in 2019 by the German manufacturer Loell. The machine was regularly maintained by OEM and is still in operation. As the brewery is stopping the production on this line, they are no longer in need of this machine. Tech. Details Running direction: left-right Detections: Bottom inspection camera Sealing surface inspection camera Sidewall inspection camera Residual liquid and residual caustic detection Thread inspection Formats: 0,33 l Longneck (brown/green/white) 0,5l NRW (brown with crown cork) 0,5l NRW (white with thread) 0,5l Euro (brown) 0,33l Euro (brown) 0,33l Vichy (brown) 0,33l Gourmet Scope of delivery  Ejector after machine Cob Exievlxfqoaasgt

Condition: used, Year of construction: 2008, Overview This cup filling machine was built in 2008 by the German manufacturer Ampack. The machine was last used by a dairy company, is in a well-maintained condition and is available immediately. Technical details Output: approx. 8,000 cups/hour Dosing units (servo-controlled): Pre-doser: 20 -250 ml Main doser: (80)100 -600 ml Cerialiser (tbd): 5-60 grams Free dosing space Current format sets 4 - corner ZKB, 8 - corner ZKB, round ZKB Control system: Siemens S7 Weight: approx. 25 tonnes Further information, pictures, and videos of the machine on request. Cjb Esvn Txqexiaaogt

Condition: used, Year of construction: 2012, Overview This labeling machine, type: Novexx Solutions ALS 206 was built in 2012 and ws used for carton-labeling. With this solution, labels with a width of from 10 – 156 mm (material width incl. carrier material max. 160 mm) on the side of products become. The surface of the product must be flat in order to ensure uniform label application. It Paper and rigid PE label materials can be used become. The maximum dispensing speed is 30 m/min. The tripod with the vertical and horizontal Adjustable spindle allows flexible integration into a Assembly line system. The product sensor must be connected to the M12 connector of the ALS. Top labeler and bottom labeler printing unit with infeed and outfeed belt. Upper unit model ALS 206, subunit ALX 924/5. Can be supplied with computer and label machine for cardboard labels. Incl. tripod. The subway labeller was new 2 years ago. It is an overhoult device. Technical Details Dispensing speed: Up to 30 m/min Material width incl. material carrier: 10 - 160 mm Label length: 5 - 600 mm Label roll diameter: up to 300 mm Data interfaces: RS 232C, Ethernet, USB Scope of delivery Top labeler | Novexx Solutions | ALS 206 | 2012 Bottom labeler | Novexx Solutions | ALX 924/5 | 2022 Cob Exsvrfh Esiaasgt

Condition: used, Year of construction: 1997, Overview  This cup filling machine was built in 1997 by the German manufacturer Ampack. The machine was in use until recently at a dairy company, is in a well-maintained condition and is available immediately. Please note that the machine is without control cabinets, tray erector and X-Ray. Technical details  Output: approx. 19,200 cups/hour (40 cycles/min on 8 lanes) 2 fillers: yoghurt + fruit/ rice pudding Control system: Siemens S5 Weight: approx. 11 tons Further information, pictures and videos of the machine on request Cobjvn Tyzs Exiaaegt

Condition: used, Year of construction: 2006, Overview This bread roll machine, type: Kemper Quadro Roll was built 2006 in Germany. The divider allows you to form dough of various shapes and sizes. The most important features of the device: Capacity: 6,000 pieces/h Number of rows: 5 Product: round or square Dough dividing range: 40 - 150 g (square rolls), 40 - 100 g (round rolls) working width 800mm Integration: Possibility of connecting the machine with the soaking and sprinkling station and the putting table. Technical Details 5 rows 400V/ 50Hz Scope of delivery Bread roll machine | Kemper | Quadro Round | 2006 Cgeb Esvq N Elexiaaot

Condition: used, Year of construction: 2005, Overview This automatic 14 needle injector, type: P14 was built in 2005 in Switzerland Smallest automatic units with 14 needles in 2 rows For better economic efficiency in small and medium-sized companies Repeatable accurancy on injecting with single neelde valve control Manual feed rate adjustment Construction: Completely stainless-steel, fully isolated. Technical Details Length/ width/ height: 1200 mm 450 mm 1800 mm Power: 0.75 kW Max product height: 180 mm Max product width: 280 mm Scope of delivery Automatic needle injector| Pökomat | P14| 2005 Cobsvttf Us Exiaasgt

Condition: used, Year of construction: 2012, Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling still water. The line has been regularly serviced and is in very good condition. All machines are from 2012 and have only about 20,000 operating hours. Output: 4,200 bph on 5,0l Formats: 2.5l and 5,0l Closure: 38mm plastic screw cap Label: hot glue List of machines Blow moulder | Sidel | SBO 3 Compact | 2012  Preform kipper || 2012  Preform hopper and feeder || 2012  Air conveyors | NTS || 2012  Rinser Filler Capper | Gallardo | 12-18-4 | 2012  Handle applicator | And & Or || 2012  Labeller | Makro | MHK23P UHM1L1 CE | 2012  Line distributor | Emebe || 2012  Shrink packer | KHS | Innopack Kisters SP | 2012  Handle applicator | Project AE | Progrip 550 | 2012  Cob Ejtr R Tkexiaaegt

Condition: used, Year of construction: 2010, Overview This bowl cutter made by the German manufacturer MBK Ellich was built in 2010. The machine is maintained and will be equipped with a new front cover. With touch panel for temperature check and speed control. Technical Details Volume: 40 liter Knife shaft 50–4000 min-1 Operating voltage 400V/ 50Hz Rated power 18,5 kW Scope of delivery Bowl cutter | MBK Ellrich | SC 40/CTL | 2010   Ceb Exiaougb Tuoaegt

Condition: used, Year of construction: 2003, Overview This grinder, type: KOLBE AWE 130 was built in 2003 in Germany. The machine is in good condition. Technical Details 130mm hole plate diameter 1 speed working worm 1 speed feeding worm 130 liters hopper capacity Width: 1250 mm Depth: 1000 mm Height: 1550 mm Installed power: 11,0 kW, 23 A Voltage: 380 V, 50 Hz Scope of delivery grinder | KOLBE | AWE 130 | 2003 Cgsb Exjugb Tzjiaajt

Condition: used, Year of construction: 2013, Overview This swing loader, type: ITEC 27200 was built in 2013 in Germany. Perfect for BigBox -tipping. In very good condition. Technical Details Length: 2350 mm Width: 2000 mm Height H1: 1900 mm Height H2: 3300 mm Tip-height: 1200 mm Transfer-height: 1040 mm Box measurements: 1200 * 1000 * 800 mm Max. box-weight: 1000 kg Weight: 650 kg Scope of delivery Swing loader for BigBOX | ITEC | 27200 | 2013 Cjb Esugpxrexiaajgt

Condition: used, Year of construction: 2009, Overview This continously crate washer, type: Kitzinger Contino 250 was built in 2009 in Germany. The crate wahser ensures that all the dirt on the crate, such as proteins, blood residues, fasts and dried-on dirt, is removed in a single wash cycle. Technical Details Capacity: 160 crates/ hour Total electricity connection: 24 kW Heating Main Washing: 10 kW heating rinsing zone clear water: 10 kW power for pump and transport drive: 4 kW Water tank: 360 litres Connection fresh water: 1/2 inch Drain: DN 40 mm belt width: 420 mm, clearance: 420 mm x 350 mm, total dimensions: 4000 mm x 1300 mm x 1900 mm Scope of delivery continously crate washer | Kitzinger | Contino 250 | 2009 Cgob Exiasuimbijajt

Condition: used, Year of construction: 2001, Overview This mixer-grinder, type: K&G Wetter MWW 130 was built in 2001 in Germany. This machine is in good condition. Technical Details Throat diameter: 130 mm Motor power 19 Kw.50A.400V. With hopper Capacity approx. 3500 kg/h (depends on the hole plate) Speed working screw:180/360 rpm Speed feeder screw:19/38 rpm Speed mixing shaft:9.5/19 rpm Weight 2000 kg Scope of delivery Mixer-Grinder | K&G | MWW 130| 2001 Csb Eoumptkjxiaaegt

Condition: used, Year of construction: 2019, Overview  This filler and capper for products such as hand sanitizers, liquids, lotions and creams was built in 2019 by the Chinese manufacturer Terry. The machine is in its original, unused condition and is still in its original packaging. The machine has never been put into operation and is immediately available.   Technical details  Filling volume range: 20-300 ml  Bottle shape adaptation range: ø25-70 mm (For diameters of 10-25 mm, an inverse shape can be used if required. Products with a diameter over ø70 mm can use customized moulds for automated production)  Filling accuracy: 20-100 ml, ±0.5 g; 101-300 ml, ±0.5 %  Production speeds:   Products with 300 ml content ≥15 bottles/minute,   Products with 200 ml content ≥20 bottles/minute,   Products with 100 ml content ≥35 bottles/minute,   Products containing 50 ml ≥40 bottles/minute. (All figures are based on the use of water as a medium.)   Products with 150 ml content ≥20 bottles/minute. (All figures are based on the use of cream as a medium.)  Air pressure source: 0.6-0.8 MPa  Air consumption: 200 L/min  Cgob Exiaounn Troaet

Condition: used, Year of construction: 2020, Overview  This filling line for tetra packs was installed in 2021 and consists of an A3 Flex filler, Helix accumulator, Domino printer, capper, and cardboard packer. The line currently fills water into carton packs. The machines can be viewed in person at any time.  Technical details  Output: 9,000 containers/ hour  Cap: Helicap 23   Several products can be filled such as dairy products, juices, flavored water    Last filled product: Unflavored drinking water   Packaging: 2x5 containers per cardboard  Layout and technical documentation available upon request   Machine list  Filler | Tetra Pak | A3/Flex TBA | 2020  Printer | Domino | A520i | 2020  Accumulator | Tetra Pak | Helix 30 | 2020  Cap applicator | Tetra Pak | CAP30Flex | 2020  Cardboard packer | Tetra Pak | CBP32 | 2020 Cgob Exioupppkoaaot

Condition: used, Year of construction: 2014, Overview This MONO-BLOCK bottle filling line was constructed by KOHEM (now CIMEC) in 2014. It operates perfectly and has been well-maintained. Currently, it is dismanteld and stored. The bottle-formats are 33 cl long neck, 75 cl ”champagne-style” and 375 cl champagne style. The capacity is 1000-1300 bph when doing 33 cl long necks. Equipped with pneumatic offloading solution. Machine list Labeling Machine (2014) Manufacturer: CDA Model: R1000 Filler Capper (2014) Manufacturer: Kohem (now Cimec) Model: RIS 8/1 - DPS Cgjb Exett Um Hjiaajt

Condition: used, Year of construction: 2016, Overview This complete filling line for glass bottles is part of a brewery and used for filling beer in 330 ml glass bottles with crown caps. It consists of an automatic glass depalletizer, self-adhesive labeller, filling triblock and a carton packer. The entire equipment was installed in 2017 by Italian manufacturer Framax. All the equipment is still installed and can be viewed in person during production. Technical details  Production capacity: 2,400 bph (at 0,33l) Formats recently used: 0,33l Bottle diameter: 60mm, height is adjustable 26mm crown cap Packaging: 6x4 carton box Scope of delivery Automatic depalletizer | Framax | DEPAL SS-3000 | 2017 Automatic sheet removal Photocells for depalletizer Selfadhesive labeller | Framax | RLA-H06-S3-L3-D480 | 2016 3 stations for 3 labels (front, back, neck) Date/ batch printer Isobaric filler | Framax | Modulblock RFCI-16/16/1-DPS/C | 2016 Nominal capacity: 3.000 bph 16 Rinsing positions 16 Filling positions Single head capping unit for crown caps with cap feeding unit Double air pre-evacuation with CO2 Water spray device before capping, for reducing the amount of residual oxygen Automatic carton packer | Framax | CP-0700-1T | 2017 Box erecting and inserting machine With taping machine Accessories such as conveyors, cooling, pumps Cgeb Eett Um Rsxiaaet

Condition: used, Year of construction: 2018, Overview These 2 cooking-kettles  were built in 2018 by company MKN in Germany. One pressure cooking-kettle and one standard cooking-kettle. They can be used for all kind of batch-cooking  - applications like cooking, blanchering, braising etc. Both machines are on stock. Technical details 1. Pressure cooking braisiére Elektro 2/1 GN External dimensions: 1100 x 850 mm x 700 mm Internal dimensions: 700 x 540 x 300 mm Nominal capacity: 111 litres Usable capacity: 96 litres Electrical connection: 14.4 kW 3 NPE 2. Electric Braisiere Magnum External dimensions: 1000 x 850 x 700 mm Internal dimensions: 700 x 540 x 250 mm Nominal capacity: 92 litres Electrical connection: 14.4 kW 3 NPE Scope of delivery Pressure cooking braisiére | MKN | 2018 Electrical braisiére Magnum | MKN | 2018   Cjb Exjtv S I Djiaaogt

Condition: used, Year of construction: 2008, Overview This wrap-around cardboard packer was built in 2008 by Italian manufacturer SMI. The machine is still installed and can be viewed in person. Techn. Details Capacity: up to 45 packs per minute Recently packed: 3x4 cardboard, 0,75L glass bottles Other formats possible Working hours: 1,752 POSYC 3000 Touch panel Cgebormfpvs Exiaast