Used Beverage production for sale (913)

Condition: used, Year of construction: 2010, Overview  The Octopus film winder was built in Finland in 2010. The machine was in use at a mineral water company until recently and is already dismantled and immediately available.   Technical details   Speed of the motion sequences  Ring up/down 0.15 m/s  Ring rotation 18 rpm  Film insertion 4.5 m/s  Film: LLDE pre-stretched  Hold-down device  Pallet dimensions   ¼ EURO,  ½ EURO,   EURO,   1200 × 1000,   Max. height 2400 mm,   Min. height approx. 50 cm depending on the system settings  Dimensions  Length 2850 mm   Width 2150 mm   Height 3140 mm   Weight 1050 kg   Voltage: 3 × 400 VAC 50 Hz +N+earth  Air pressure 6 bar, 9 l/operating cycle  Csb E Tb Esuca Amjgegt

Condition: used, Functionality: fully functional, total height: 5,500 mm, tank capacity: 21,500 l, warranty duration: 6 months, inner diameter: 2,500 mm, TECHNICAL DATA - Vertical cylindrical on closed feet - Make: CIDEC - Capacity: 215 HL - Material : 316 stainless steel ROOF - Eccentric chimney at the front - Lifting rings VIROLE - Rectangular door with external opening 300×420 mm - Level tube - Partial drain with DN 70 butterfly valve MÂCON - Taster tap Cgjb E Tb Eswamb Ioget BOTTOM - conical with centred drain + bent tube outlet at the front of the tank with DN 70 butterfly valve MÂCON - 4 feet 600 mm high DIMENSIONS - Diameter: 2500 mm - Height: 5500 mm

Condition: used, Year of construction: 2019, Overview    This filling line for returnable glass was installed in 2019 and essentially consists of a bottle washer, rinser/filler and capper block and a labeling system with laser printer. The bottling line is vacant as the previous owner is closing the brewery due to retirement. The bottling process ran smoothly until the end.  The equipment is still installed and connected and can be viewed in person at any time.   Technical details  Capacity: max. 1,500 bph (1,000 bph were actually run)  Bottled product: Beer   Included formats: 0.33l longneck, 0.5l NRW  Closure: Crown cap  Scope of delivery  Bottle washer | SEN | 1989 (overhauled and installed in 2020)  Isobaric filler block | Shandong Yuesheng | 2019   Rinsing positions: 14   Filling positions: 12   Capping positions: 5   With pre-evacuation   Counter-pressure filler incl. 2 formats 0.33 longneck 0.5 NRW  Dry tunnel | Shandong Yuesheng | 2019  Labeler incl. laser printer   Collecting table   Csb Esuch Tgj Tb Egogt

Condition: used, Year of construction: 1987, Functionality: fully functional, total height: 7,700 mm, tank capacity: 50,700 l, warranty duration: 6 months, inner diameter: 3,000 mm, TECHNICAL SPECIFICATIONS - Brand : LEJEUNE - Year : 1987 - Material : 304 stainless steel - Volume : 507 HL - Interior finish : 2B - Exterior finish : Brushed - 2.5 % flat bottom Ceb E Tbswal Uas Egogt ROOF - Central chimney - Ø 500 stainless steel hatch with clamping arm - Lifting rings VIROLE - Stainless steel door 410×520 with external opening - Oval autoclave door and ladder support - Stainless steel DN70 butterfly valve with sludge trap - Stainless steel taster - 1 level - Coil circuit BOTTOM - DN70 stainless steel butterfly valve - 4 fixing brackets for floor slab DIMENSIONS - Diameter: 3000 mm - Ferrule height: 7700 mm

Condition: used, Year of construction: 1998, Overview  This vacuum filler was built in 1998 by Italian manufacturer GAI. In 2024 the machine was fully refurbished and is available immediately.   Technical Details    Effective Capacity: approx. 4,500-5,000 bottles/hour  Machine equipped for the following bottle formats: Bordeaux 75cl (diameter 78mm) - Burgundy 75 - 37.5cl - Magnums  Rinser with 20 clamps, inspected  Filler with 20 taps and vacuum system (new turbine) - taps inspected, new gaskets. New seating springs.  AROL Saturno Capper with 4 heads and vacuum - semi-new jaws in perfect condition - new vacuum pump and circuit  New wine inlet solenoid valve  Plug for feed pump  Machine newly refurbished (solenoid valve, jaws, vacuum turbine, gaskets, vacuum pump)  Electrical supply: 400 Volts / 50 Hz, 3 phases  Dimensions:  Long 380cm x Wide 140cm x High 250cm  Weight: 3500 kg    Ceb E Tbsuch Tmj Egsgt

Condition: used, Year of construction: 2011, Functionality: fully functional, total height: 2,100 mm, total width: 1,600 mm, total length: 1,800 mm, warranty duration: 6 months, TECHNICAL SPECIFICATIONS - Model: GG80/2NPS/6 - Year : 2011 - Output : 3000 bottles/h max - 4 heads - 3 stations Cgeb E Tbowalyvs Egst - Bottle diameter : 40 min / 120 max - Stepper motor DIMENSIONS - Length : 1800 mm - Width : 1600 mm - Height : 2100 mm

Condition: used, Year of construction: 2005, Overview This grinder, type: Laska W 130 was built in 2005 in Austria. The machine will be fully refurbished. We will add new safety grid, outfeed saftey and new cutting tools. Technical Details 130 mm hole plate diameter 1 speed working worm 48 liters hopper capacity Width: 800 mm Depth: 1000 mm Height: 1550 mm Installed power: 7,5 kW Voltage: 380 V, 50 Hz Scope of delivery grinder | LASKA | W 130 | 2005 Cgjb E Tb Esugpxlsget

Condition: new, Functionality: fully functional, total height: 3,700 mm, overall weight: 340 kg, warranty duration: 12 months, inner diameter: 1,600 mm, TECHNICAL SPECIFICATIONS - Brand : ARSILAC - Model : SPAIPSER5000 - Material : 304 stainless steel - Total capacity : 4 880 litres - Bottom: flat sloping, 4% slope - Roof: floating cap - Interior finish : bright annealed - Exterior finish: brushed ROOF - 1 INOX 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) Cgebjwalnae E Tb Egjt VIROLE - Vacuum lifting rings - 1 gallows - 1 lifting winch - 1 ladder support - 1 rectangular door 420×530 mm at the bottom of the shell, opening outwards - 1 partial drain with 100×100 square flange, 40 MÂCON stainless steel ball valve, stainless steel plug - 1 DIN 15 tasting tap - 1 needle thermometer - 1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube) - 4 turns of coil with 2.15 m² heat exchange surface on the shell - 2 turns of coil with an exchange surface area of 0.75 m² around the door - Maximum pressure on coil circuit: 1.5 bar - 1 inlet and 1 outlet on the coil circuit, 1‘ 1/4’ male gas connection - 1 connection with immersion sleeve for control probe - 1 identification plate BOTTOM - 1 total drain with square 100x100 flange, stainless steel 40 MÂCON ball valve and stainless steel plug - 3 stainless steel feet, height 500 mm, adjustment screw and plate DIMENSIONS - Diameter: 1600 mm - Sleeve height: 2500 mm - Total height : 3700 mm - Weight : 340 kg - Shell thickness : 15/10ᵉ mm - Curved base thickness: 20/10ᵉ mm

Condition: used, Year of construction: 1998, Overview This grinder, type: K&G WW 200-MM was built in 1998 in Germany. This machine is in good condition. Technical Details Throat diameter: 200 mm Power supply voltage: 400 V Power 50 kW Efficiency approx. 12000 kg/h (depends on the hole plate) Height 178 cm Width 165cm Length 105cm Weight 2000 kg Scope of delivery Grinder | K&G | WW 200-MM | 1998 Cgob E Tbsumpr Te Egst

Condition: new, Functionality: fully functional, total height: 3,485 mm, overall weight: 565 kg, tank capacity: 8,117 l, warranty duration: 12 months, inner diameter: 2,100 mm, TECHNICAL SPECIFICATIONS Cgsbjwall Eo E Tb Egot - Brand : ARSILAC - Model : STOIPSER7500B - Material : 304 stainless steel - Total capacity : 8 117 litres - Bottom: flat sloping, 4% slope - Roof : centred conical - Interior finish : bright annealed - Exterior finish: brushed ROOF - 1 400 mm diameter lever-operated hatch - 1 tapping with PVC ball vent VIROLE - Lifting rings - 1 ladder support - 1 rectangular door 420×530 mm at the bottom of the shell, opening outwards - 1 partial drain with 100×100 square flange, 40 MÂCON stainless steel ball valve and stainless steel plug - 1 DIN 15 tasting tap - 1 needle thermometer - 1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube) - 5 turns of coil with an exchange surface of 4.38 m² on the shell - 2 turns of coil with an exchange surface area of 1.23 m² around the door - Maximum pressure on coil circuit: 1.5 bar - 1 inlet and 1 outlet on the coil circuit, 1‘ 1/4’ male gas connection - 1 connection with immersion sleeve for control probe - 1 identification plate BOTTOM - 1 total drain with square 100×100 flange, stainless steel 40 MÂCON ball valve and stainless steel plug - 5 stainless steel feet, 625 mm high, adjustment screw and plate DIMENSIONS - Diameter: 2100 mm - Ferrule height : 2250 mm - Total height : 3485 mm - Weight : 565 kg - Roof thickness : 20/10ᵉ mm - Shell thickness: 15/10ᵉ mm - Bottom thickness: 30/10ᵉ mm

Condition: used, Year of construction: 2016, Overview  This complete filling line for glass bottles was part of a brewery and consists of a filler and capper block, labeler and a carton capper. The entire equipment was built in 2016 and has already been dismantled and stored. Scope of delivery Isobaric Filler & capper | cimec | AM DPS 811G | 2016 Output: 1,200 bph (at 0.33l) Designed for 0.33l glass bottles Labeler | murcia codificacion | MC-220 | 2016 Output: 1,300 bottles/h Adaptable to 1.5L bottles Carton sealer | Siat | SK2 | 2016 Cgob E Tb Ejtt Um Asgst

Condition: used, Year of construction: 1997, Overview This fryer was built in 1997 by company Stein/ JBT in the US. The Stein 400/3000 fryer can be used for all kind of continuously frying applications like chicken nuggets, pork Schnitzel, chicken Schnitzel, etc.. The machines are on stock. Technical details Output: approx. 500 kg/h (depends on the product) Belt width: 400 mm (cooking area) Belt length: 3000 mm (cooking area) Scope of delivery Fryer 400/3000 | Stein/ JBT | 1997 Cgob E Tjtv S I Rob Egjt

Condition: used, Year of construction: 1999, Overview  The machine was built in 1999 by the German manufacturer Anker and is overhauled. The machine has run only a few hours a year and is therefore in good condition.  Technical data  Front label (belly+ chest wet glue), back label (wet glue) Running direction: right - left  Complete documentation  With a new bottle format and 2 new label formats  Freely selectable label dimensions Cgsb E Tbsm D Ukms Eget

Condition: used, Year of construction: 1992, Overview This blowmoulder was built in 1992 from French manufacturer Sidel. It can produce up to 4.000 bottles per hour. Techn. Details Capacity: 4.000 bph 4 cavities Scope of delivery Blowmoulding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two types of molds for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL Cgob E Tbjnpbhve Egot

Condition: used, Year of construction: 2019, Overview   The machine was manufactured in 2019 by the American manufacturer CODI. Most recently, it was used to can flavored and carbonated mineral water. The machine has already been disassembled.  Techn. details  Capacity: 3.000 cans/ h  Formats  0.33 l standard  0,44 l Standard 0,33l Sleek  Volume of the filling tank: 64,2 l Voltage: 400-500 VAC  Frequency: 50-60 Hz Load current: 13 A  Csb E Tepzk Ahsb Egsgt

Condition: used, Year of construction: 2012, Overview  The crate control was built in 2012 by the German manufacturer Syscona. The percentage of foreign bottles at which the crate is rejected can be set. Technical details Capacity: 3,800 crates/h  Longitudinal run  Previously used formats: 12x 1L PET bottles  Inspection via camera  Including pre-belt and line distributor 230V/ 50Hz  Cobjqc E I Rs E Tb Egogt

Condition: used, Year of construction: 2007, Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Running direction: counterclockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW Csb E Tboqqz Txo Egjgt

Condition: used, Year of construction: 2017, Overview  This brew house was built in 2017 by Spanish manufacturer INOX DUBRA and has a wort volume of 25 hectoliters. Various equipment is included in the offer, from the brewhouse to bottling. All the equipment is still installed and be viewed and inspected in person at any time.   Scope of delivery  Brewhouse | INOX DUBRA | 25 HL | Two-Vessel Brewhouse   Plate Heat Exchanger | CESPEDES | UFT34/1OO- UFT32/12 | 2015  Cold Water Tank | 2.500L   5x Isobaric Fermentation tanks | INOX | 2.500L | 2020  3x Atmospheric Fermentation tanks | INDUSTRIAS CESPEDES | 2014  Brite tank | INDUSTRIAS CESPEDES | 2017   Automatic, isobaric filler for glass | INOX | EMBONOX-6A | 2020  Carton labelling machine   Cooling equipment  Grinding mill  Water tank | 1.000L   Compressor   2x Helicoidal pump   Volumetric pump Cgeb E Tb Esty Ddrjget

Condition: used, Year of construction: 2003, Overview  This shrink packer SK 600F was built in 2003 by Italian manufacturer SMI. The machine is immediately available, currently dismantled and stored. There are no additional costs for removal.  Technical Details    Capacity: approx. 60 packs/minute (nominal)  Features:   Cans in shrink packs  With printed film  6x4 single-lane  4x3 single-lane  3x2 single-lane  Accessories: 2 roll holders with gluing device  Machine protection: Sliding doors  Shrink tunnel: ST 4000, with 1 fan in the outlet  A film roll trolley can be purchased as an option    Cob E Tjt Hzi Rob Egegt

Condition: used, Year of construction: 2012, Overview  The METE Double Line carry handle applicator was built by TwinPack in 2012 and is used to attach self-adhesive handles made of transparent tape and cardboard labels to packaging bundles of various products. Technical details Maximum speed: 140 packs/minute (70+70), depending on the configuration Packaging sizes processed: Maximum height: 400 mm Maximum width: 400 mm Compressed air consumption: 2.8 Nl/package (normal) 4.2 Nl/package (with bow handle unit) Electrical power: 5 kW Cgeb E Tbevmd Uts Eget

Condition: used, Year of construction: 2000, Overview  The crate washer was manufactured in 2000 by the German company Bohrer. It is located at a German brewery and was part of a plant that has been shut down as it was replaced by a completely new line. In autumn 2024 the line was stopped and the machine was dismantled and stored.  Technical Details  Capacity: up to 2,000 crates/hour (can be adjusted from 500 - 2,500 crates/hour) Formats: crate of 12 bottles 700ml 356 x 275 x 346 travel direction crosswise crate of 20 bottles 250ml 360 x 275 x 255 travel direction crosswise crate of 20 bottles 500ml 400 x 300 x 290 travel direction crosswise crate of 20 bottles 500ml 400 x 333 x 260 travel direction crosswise Horizontal and vertical spray nozzles Spraying with hot caustic and fresh water Caustic heater with temperature regulation is integrated in the machine Machine is heated by steam Dimensions: Length: 4800mm Width: 900mm Height: 1400mm Weight: 1800kg Sieves for removal of dirt Incl. documentation Incl. spare parts list Incl. Electrical diagram Cgobjvm D Umo E Tb Egot

Condition: used, Year of construction: 2002, Overview This universal smoke house, type: Bastra 1500 C was built in 2002 in Germany. Functions: reddening, drying, ripening, smoking, cooking, scalding, roasting, moistening, According to previous owners the machine was regularly serviced by Bastra customer service and was in operation until recently. Technical Details Electric heating (24 kW heating output) Width: 138 cm Height: approx. 255 cm Depth: 104 cm 1 trolley 100 x 85 x 168 cm (stock length 90 or 100 cm) Smoke generator: BASTRASMOKE (saw dust) Scope of delivery Smoke house| Bastra | Bastramat 1500 C| 2002 Cgeb E Tjvndpyjb Egot

Condition: used, Year of construction: 2019, Overview  This atmospheric semi-automatic can filler from the brand Cask, 2019, is for sale because the owner is closing the business. It is still operational and can be inspected in person. Technical Details  600 cans/hour 2 filling heads CO₂ pre-purge Canning table Formats Slim 163 mL 187 mL 250 mL Sleek 250 mL 355 mL Standard 250 mL 330 mL 355 mL 375 mL 440 mL 473 mL 500 mL Dimensions Length [mm]: 1530 Height [mm]: 2008 Depth [mm]: 646 Power supply: 240 VAC, 50 Hz Scope of delivery includes FIAC SUPER SILENT 59 air compressor (required for lid sealer), 8 bar Cjbsvtpg Us E Tb Egsgt

Condition: used, Year of construction: 2012, Overview This universal smoke house, type: REICH UK 1800 BE was built in 2012 in Germany. Functions: reddening, drying, ripening, smoking, cooking, scalding, roasting, moistening, According to previous owners the machine was regularly serviced and was in operation until recently. The unit is completly overhoult. Technical Details 1 trolley: 80 x 75 x 155 cm Electric heating (16,8 kW heating output) Width: 112 cm Height: approx. 228cm + engine 37cm cm Depth: 85 cm Smoke generator: NaturalSmoker G 200 S (saw dust) New control panel MIC 3000 Scope of delivery Smoke house| Reich| REICH UK 1800 BE| 2012 Cgjb E Tb Eevr Ebfjgst

Condition: used, Year of construction: 2003, Overview This Automatic Double-Clipper, type: Polyclip ICA 8700 was built 2003 in Germany. The ICA 8700 is the ideal machine for medium sized to large diameter products up to a calibre of 180 mm. Fibrous, collagen and plastic casings can be processed. Ideally for the production of large volumes like slicer products and moulded ham. Technical details Width: 2,200 mm Depth: 910 mm Height: 1,950-2,150 mm Weight: 800 kg Electrical connection: 200-230 VAC, 380-460 VAC, 50 or 60 Hz Power consumption: 2.8 kW Fuse connection: 16 A Compressed air: 6 bar / 0.6 MPa Air consumption: Without overspreading 0.6 NL/cycle With overspreading 20 NL/cycle With looper 1.0 NL/cycle Scope of delivery Automatic Double-Clipper | POLYCLIP | ICA 8700 | 2003 Ceb E Tb Eovtrvfegogt