Used Beverage production for sale (932)

Condition: used, Year of construction: 1997, Overview  This cup filling machine was built in 1997 by the German manufacturer Ampack. The machine was in use until recently at a dairy company, is in a well-maintained condition and is available immediately. Please note that the machine is without control cabinets, tray erector and X-Ray. Technical details  Output: approx. 19,200 cups/hour (40 cycles/min on 8 lanes) 2 fillers: yoghurt + fruit/ rice pudding Control system: Siemens S5 Weight: approx. 11 tons Further information, pictures and videos of the machine on request Dolq R Etevn Tyzoxout

Condition: used, Year of construction: 1992, Overview This blowmoulder was built in 1992 from French manufacturer Sidel. It can produce up to 4.000 bottles per hour. Techn. Details Capacity: 4.000 bph 4 cavities Scope of delivery Blowmoulding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two types of molds for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL Dujlq R Etsnpbhvsxjt

Condition: used, Year of construction: 1999, Overview  The machine was built in 1999 by the German manufacturer Anker and is overhauled. The machine has run only a few hours a year and is therefore in good condition.  Technical data  Front label (belly+ chest wet glue), back label (wet glue) Running direction: right - left  Complete documentation  With a new bottle format and 2 new label formats  Freely selectable label dimensions Dslem D Ukmjq R Etxeut

Condition: used, Year of construction: 2017, Overview The CIP system from Diversey is used for stationary cleaning of filling machines and processing equipment in the beverage industry. This unit was developed between 2015 and 2017 and is now for sale as the customer quit the purchasing contract. Therefore it was not in use. It is properly stored and can be installed and implemented into an existing circuit by Diversey technicians. Furthermore there is the possibility to adapt the P&ID to the customer's needs. The CIP unit itself has no operator panel, as it will be implemented as slave system into the controle of a filling machine or other machine to be cleaned. It can be connected to an  Allen Bradley control system. It is installed in a stainless steel base frame and has a 500l tank. There are four pumps for the dosing of cleaning and disinfection media. Furthermore there is a heat exchanger heated by steam. In addition there are several measurement devices for temperature, flow rate, filling level and conductivity Tech Specs: Base frame stainless steel Control: can be connected to Allen Bradley control CIP pumpcapacity: 20 m^3/h Tank volume: 500l Number of dosing pumps: four Measurement devices: Temperature Flow rate Filling level Conductivity Features: Suitable for the cleaning of fillers, flash pasteurisers, mixers, syrup rooms as well as piping systems and tanks P&ID can be modified Dosing pumps from Prominent CIP Pump: Hilge Hygia 50/50/5,5/2 Duelqol Hxlye R Etxet

Condition: used, Year of construction: 1990, Overview The filler was manufactured in 1990 by the German manufacturer Nagema. It was completely overhauled/modernised and also equipped with a new control system in 2022. With the double pre evacuation system it is suitable for beer also besides other carbonated drinks. After the overhauling of the machine, it has not yet been used again. It was planned for a brewery project, where the owner now decided to shift his production to a contract bottler. Therefore the machine is now available for sale. It is properly stored in a warehouse. Technical Specification: Capacity: 9000 bph on 330 ml Number of filling valves: 40 Number of capping elements: 10 Formats: 330 ml and 500 ml Products: beer and CSD Control: Siemens S7 with touch panel Djlq R Etel Hxmhexsut

Condition: used, Year of construction: 2006, Overview The BLOMAX 4 blow molder was manufactured by the German company SIG Corpoplast (now KHS) in 2006. It has been overhauled by a machine builder and can be inspected in dry operation. Blow molds are not included, but can be obtained.  Technical details  Output: up to 7,200 bph 4 cavities Dimensions: 4960 mm x 3900 mm x 3000 mm  Weight: 15 t  Operating hours: 44.736  Bottles Volume: 200 ml - 2000 ml   Max. Diameter: 115 mm  Max. Length: 350 mm Preforms  Length: 60 - 200 mm Max. Support ring diameter: 35 mm  Scope of delivery  Blow molder is completely equipped with the system for preform feeding (silo, elevator, sorting, chute) Dolq R Ejl Hxpkstxjut

Condition: used, Year of construction: 2001, Overview The KSB3000 blowing machine was manufactured in 2001 by the Austrian machine builder KOSME. It is located at a machine builder and can be visited in dry run to see the functionality of the machine.  Technical details  Capacity: 3.600 bph  3 cavities Dimensions (LxWxH): 6830 mm x 2860 mm x 2450 mm  space requirement approx. 9x5 m²  weight: 4,5 t  Operating hours: 19.935   Bottles Volume: 250 ml - 2500 ml   Max. Diameter: 110 mm  Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed). Duslq R Esl Hxprjtxot

Condition: used, Year of construction: 2013, Overview The bottle washer was manufactured by the German company Krones in 2013 and put into operation in 2014. It has been serviced annually. In addition, tenside lye cleaning and spare parts can still be purchased. DISMANTLING INCLUDED. Technical data  Capacity: 66,000 bph Maximum bottle diameter 69 mm Set up for the following formats:  Vichy 0,33l Long-Neck 0,33l Long-Neck 0,5l NRW 0,5l  Steinie 0,33l Delq Rsl Hx Ene Etxeut

Condition: used, Year of construction: 2016, Overview  The packer was manufactured in 2016 by the former German company Federspiel. It is located at a large German mineral well and is no longer in operation. The packer was removed at that time because it no longer met the performance requirements. Technical details Capacity: 3800 crates/h (at 0,7l)  Formats: 0,25l; 0,5l; 0,7l; 1,0l  Control Siemens S7 Multi gripper head with 2x12x8 grippers Bottle table  Bottle line-up block Dujljl Hx E Seq R Etxet

Condition: used, Year of construction: 2021, Overview The packaging machine was manufactured in 2021 by the Italian manufacturer V-Shapes. This compact machine dispenses various products into single sachets between 0.5ml and 25ml. The scope of delivery also includes the printer, which allows the sachets to be produced in-house. The machine can be visited in operation at any time. Technical Data Packaging machine | V-Shapes | PRIME | 2021 Production capacity: Up to 45 units/minute Time for packet size change: 15 minutes Number of packaging lines: 1 Maximum dimensions of film reels: Width 110mm/ 4.33 ” Diameter 250 mm Weight of film reels: 20 kg / 44.09 lb Film reel consumption: Up to 2625 mm /min Standard weld dimensions: 5 mm(± 1 mm) Machine colour: Steel Electronic parts: Standard IP55, IP67 on request Standard electronics: PLC 6 brushless motors                                               *Pneumatic dosage system: volumetric to measure Dimensions of V-Shapes packets: Height from 50 to 100mm/1.969” to 3.937” Width: from 40 to 100mm/1.575” to 3.937” Air Pressure: 7 bar Electric power: 20 Kwh Weight (maximum): 1000 kg / 6612lb Machine Footprint: 1500mm x 1000mm x 1000mm (H) Printer | AstroNova | T2-C | 2022 Print quality: 1600 x 1600 dpi or Print speed: 6 ips (152mm/sec) or 12 ips (300mm/sec) 4 external ink tanks á 2l Dimensions: 606mm x 580mm x 795mm Weight: 60 kg (without material) Djlq Rsl Hx Rde Etxout

Condition: used, Year of construction: 2019, Overview   The machine was manufactured in 2019 by the American manufacturer CODI. Most recently, it was used to can flavored and carbonated mineral water. The machine has already been disassembled.  Techn. details  Capacity: 3.000 cans/ h  Formats  0.33 l standard  0,44 l Standard 0,33l Sleek  Volume of the filling tank: 64,2 l Voltage: 400-500 VAC  Frequency: 50-60 Hz Load current: 13 A  Djlq Rjpzk Ahe Etxsut

Condition: used, Year of construction: 2012, Overview  The crate control was built in 2012 by the German manufacturer Syscona. The percentage of foreign bottles at which the crate is rejected can be set. Technical details Capacity: 3,800 crates/h  Longitudinal run  Previously used formats: 12x 1L PET bottles  Inspection via camera  Including pre-belt and line distributor 230V/ 50Hz  Dujlqoqc E I Re R Etxjt

Condition: used, Year of construction: 2007, Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Running direction: counterclockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW Djlq R Etjqqz Txoxjut

Condition: used, Year of construction: 1998, Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 7.200 bph in 1,5L Number of moulds:  6 (molds not included) Equipped with quick change for shell molds Number of heating modules: 10 modules Neck personalization: 29/25      Working hours: 47.000 only         Machine was regularily maintained       Machine equipped with:            Sidel preforms elevator to unscrambler Sidel preforms unscrambler & feeder Sidel oven & blowing wheel for 6 molds Sidel electrical cabinet Sidel PCC drive & control panel Big set of spare parts list upon request Duelerkgy Ueq R Etxet

Condition: used, Year of construction: 2002, Overview The blow molder was built in 2002 by the former manufacturer SIG Corpoplast (now KHS). The machine is still in operation and can be visited. Technical data Nominal capacity: 30,000 bottles/h Last used formats: 1.0L (27,000 bph) 1.25L (27,000 bph) 2.0L (22,500 bph) Bottle Volume: 200 - 3,000 ml Max. Diameter: 126 mm Length: 107 - 350 mm Preform Length: 60 - 200 mm Max. Diameter: 48 mm Dimensions (LxWxH): 9,920 mm x 6,279 mm x 3,357 mm Required space: 11,500 mm x 11,300 mm  Weight: 31.15 t Scope of delivery Blomax 20 Preform feeder Air transport Blomax 18 as spare parts dispenser Additional costs for spare parts, dismantling, packing and loading: EUR 45,000 Dolqery Iiwe R Etxsut

Condition: used, Year of construction: 2015, Overview This can filling line was in operation in a brewery in UK until last. The canning line is still assembled and ready for use. It is no longer in use as investments are being made in a new line.  Technical data  Capacity: 24,000 cph (Filler can do more) Formats:   330 ml 440 ml  40 filling valves Single machines  Can Depalletizer | FIPAL | MINIDEPAL 20 LA | 2015 Infeed at the bottom Discharge on top Includes safety fences, can conveyors 2 Lane Empty Can Rinser | 2015 Can Filler | KHS | Innofill Can DVD 40 | 2015 Can Seamer | Ferrum | F6 | 2014 Can Lid Alimentation | CSW Deventer Holland | Mini-Multifeeder / 54 -MMF-01 | 2015 Can Inspection | Heuft | Spectrum TX | 2015 Can Dryer | Euro Sistemi | TF 01 | 2015 Can Dryer | Euro Sistemi | TF 02 | 2015 Wrap Around Case Packer | Robopac | Prasmatic TC400 compact  | 2022 can be converted to use tray & film Check Weigher | FT System | CP600 TP TUR300 Z200 RAS001 | 2017 Multi Packer | GPI | PQuikflex 300  | 2018 Date Coder | Hitachi | UX | - Ink jet coder Palletiser | FIPAL | Pal 80 F | 2015 Stretch Wrapper | Atlanta | Revolution LS | 2015   Dslq Rotpv Twe Etxsut

Condition: used, Year of construction: 1997, Overview The fully automatic KEG plant was manufactured in 1997 by the German manufacturer BTB. The plant cleans the inside and outside of the KEGs and fills them with a capacity of approx. 60 KEGs/h. Technical details Capacity: 60 KEG/ h for 30l DIN KEGs Formats: 10l, 20l, 30l, 50l, DIN or Euro KEGs Fittings: Micromatic flat fitting and Keggyfittng Scope of delivery Cleanomat CL5 with 4 active cleaning stations with 1 filling station Medium pressure external washer 3x supply units á 300l for mixed water, acid & lye Conveyor belts Volumetric filling system Automatic filling via volumeter Automatic filling via pressure transducer CIP cleaning of the CO2 line   Duslqetqa Iqe R Etxot

Condition: used, Year of construction: 2016, Overview  This complete filling line for glass bottles was part of a brewery and consists of a filler and capper block, labeler and a carton capper. The entire equipment was built in 2016 and has already been dismantled and stored. Scope of delivery Isobaric Filler & capper | cimec | AM DPS 811G | 2016 Output: 1,200 bph (at 0.33l) Designed for 0.33l glass bottles Labeler | murcia codificacion | MC-220 | 2016 Output: 1,300 bottles/h Adaptable to 1.5L bottles Carton sealer | Siat | SK2 | 2016 Dujlq R Etott Um Aoxst

Condition: used, Year of construction: 2010, Overview    The brewhouse was built in 2010 by German manufacturer Kaspar Schulz and then expanded in 2014 with additional new equipment. The brewhouse has already been professionally dismantled and is immediately available. The full documentation and layouts are available upon request.   Technical details  Rash wort: 30 hl   Production capacity: Maximum 8 brews in 24 hours  Fully automatized (despite hop dosage)   Steam heated  Gentle-Boil method (SchoKo)   Scope of delivery  2 malt silos   4 roller mill | 800 kg/h   Brewhouse BRAUBLOCK 30 hl   Mash tun  Pre-flow vessel/ lauter tun  Wort kettle/ whirlpool  Hot water tank (HWT) 90 HL   Plate cooler  Wort aeration,   Spent grains pump  Duolq R Esuzbb Rstxot

Condition: used, Year of construction: 2022, Overview This brewhouse was manufactured in 2022 by Italian company Spadoni. The owner had purchased all the equipment to set up a microbrewery but then decided to shift the production of his beer to a bigger brewery, producing for him. Therefore, the brewhouse has not been used so far. Techn. Details Output: 25-30 hl in one brewing process Dimensions: 4.722mm x 4.401mm x 3.784mm  Brewhouse mounted on stainless steel frame 3 vessels  Mash tun Leuter tun Wort kettle + whirlpool Plate heat exchanger Scope of delivery Grist mill | Bühler AG | Smartgrist | 2022 Steam generator | ABC Perello | PMY - 12 | 2022 | 1900 m³, pressure: 7.8 bar  Water tank | Isma S.A. | 2022 | 50,000l | diameter: 3,000 mm, height: 7,400 mm  Hot water tank | agrovin | 2021 | 15.000 l   Cold water tank | agrovin | 2021 | 15.000 l  10 fermentation tanks | agrovin | 2021  7x 12.500l 3x 15.000l Water softener | 2022 Refrigeration pump | Taeevo Tech | TAE-381-P3 | 2022 Liquid dosing unit | Agrovin | Agatha PRO | 2021 Various pumps, gangway, stairs | 2022 Dslq Rjuzphro Etxjut

Condition: used, Year of construction: 2017, Overview The brewhouse was manufactured in 2017 by the Czech company HANSTEEL s.r.o.. With it, 5 hl can be produced. Technical details Two-chamber brewhouse with electric heating system. Nominal volume: 500l Total volume: 550l Brewhouse is mounted on separate frame with stainless steel stairs and platform Incl. cooler from Alfa-Laval: cooling of 500l in 1h from 99°C to 12°C Butterfly valves on the chimneys Agitators in both vessels with frequency converter to change the speed Strainer bucket with level sensor for automatic water refilling control of the brewhouse via a touch screen display accessible from the working platform the app needed to control the brewhouse can be installed on a portable device (e.g. tablet) and the operation of the brewhouse can be controlled remotely There is also a possibility to offer for sale open fermenting vats with a nominal volume of 1000 l (total volume 1200 l). Dujlqjuzpiie R Etxet

Condition: used, Year of construction: 2017, Overview  This brew house was built in 2017 by Spanish manufacturer INOX DUBRA and has a wort volume of 25 hectoliters. Various equipment is included in the offer, from the brewhouse to bottling. All the equipment is still installed and be viewed and inspected in person at any time.   Scope of delivery  Brewhouse | INOX DUBRA | 25 HL | Two-Vessel Brewhouse   Plate Heat Exchanger | CESPEDES | UFT34/1OO- UFT32/12 | 2015  Cold Water Tank | 2.500L   5x Isobaric Fermentation tanks | INOX | 2.500L | 2020  3x Atmospheric Fermentation tanks | INDUSTRIAS CESPEDES | 2014  Brite tank | INDUSTRIAS CESPEDES | 2017   Automatic, isobaric filler for glass | INOX | EMBONOX-6A | 2020  Carton labelling machine   Cooling equipment  Grinding mill  Water tank | 1.000L   Compressor   2x Helicoidal pump   Volumetric pump Duelq Rjty Ddre Etxjt

Condition: used, Year of construction: 2003, Overview  This shrink packer SK 600F was built in 2003 by Italian manufacturer SMI. The machine is immediately available, currently dismantled and stored. There are no additional costs for removal.  Technical Details    Capacity: approx. 60 packs/minute (nominal)  Features:   Cans in shrink packs  With printed film  6x4 single-lane  4x3 single-lane  3x2 single-lane  Accessories: 2 roll holders with gluing device  Machine protection: Sliding doors  Shrink tunnel: ST 4000, with 1 fan in the outlet  A film roll trolley can be purchased as an option    Dujlqot Hzi Re R Etxet

Condition: used, Year of construction: 2010, Overview  The Octopus film winder was built in Finland in 2010. The machine was in use at a mineral water company until recently and is already dismantled and immediately available.   Technical details   Speed of the motion sequences  Ring up/down 0.15 m/s  Ring rotation 18 rpm  Film insertion 4.5 m/s  Film: LLDE pre-stretched  Hold-down device  Pallet dimensions   ¼ EURO,  ½ EURO,   EURO,   1200 × 1000,   Max. height 2400 mm,   Min. height approx. 50 cm depending on the system settings  Dimensions  Length 2850 mm   Width 2150 mm   Height 3140 mm   Weight 1050 kg   Voltage: 3 × 400 VAC 50 Hz +N+earth  Air pressure 6 bar, 9 l/operating cycle  Duslqeuca Amo R Etxst

Condition: used, Year of construction: 2019, Overview    This filling line for returnable glass was installed in 2019 and essentially consists of a bottle washer, rinser/filler and capper block and a labeling system with laser printer. The bottling line is vacant as the previous owner is closing the brewery due to retirement. The bottling process ran smoothly until the end.  The equipment is still installed and connected and can be viewed in person at any time.   Technical details  Capacity: max. 1,500 bph (1,000 bph were actually run)  Bottled product: Beer   Included formats: 0.33l longneck, 0.5l NRW  Closure: Crown cap  Scope of delivery  Bottle washer | SEN | 1989 (overhauled and installed in 2020)  Isobaric filler block | Shandong Yuesheng | 2019   Rinsing positions: 14   Filling positions: 12   Capping positions: 5   With pre-evacuation   Counter-pressure filler incl. 2 formats 0.33 longneck 0.5 NRW  Dry tunnel | Shandong Yuesheng | 2019  Labeler incl. laser printer   Collecting table   Dujlq R Esuch Tgstxjt