Used Beverage production for sale (935)

Condition: used, Year of construction: 2019, Overview  This filler and capper for products such as hand sanitizers, liquids, lotions and creams was built in 2019 by the Chinese manufacturer Terry. The machine is in its original, unused condition and is still in its original packaging. The machine has never been put into operation and is immediately available.   Technical details  Filling volume range: 20-300 ml  Bottle shape adaptation range: ø25-70 mm (For diameters of 10-25 mm, an inverse shape can be used if required. Products with a diameter over ø70 mm can use customized moulds for automated production)  Filling accuracy: 20-100 ml, ±0.5 g; 101-300 ml, ±0.5 %  Production speeds:   Products with 300 ml content ≥15 bottles/minute,   Products with 200 ml content ≥20 bottles/minute,   Products with 100 ml content ≥35 bottles/minute,   Products containing 50 ml ≥40 bottles/minute. (All figures are based on the use of water as a medium.)   Products with 150 ml content ≥20 bottles/minute. (All figures are based on the use of cream as a medium.)  Air pressure source: 0.6-0.8 MPa  Air consumption: 200 L/min  Foljunn Trsikh Ugegb

Condition: used, Year of construction: 2001, Overview This mixer-grinder, type: K&G Wetter MWW 130 was built in 2001 in Germany. This machine is in good condition. Technical Details Throat diameter: 130 mm Motor power 19 Kw.50A.400V. With hopper Capacity approx. 3500 kg/h (depends on the hole plate) Speed working screw:180/360 rpm Speed feeder screw:19/38 rpm Speed mixing shaft:9.5/19 rpm Weight 2000 kg Scope of delivery Mixer-Grinder | K&G | MWW 130| 2001 Fgslsumptkoikh Ugob

Condition: used, Year of construction: 2008, Overview This cup filling machine was built in 2008 by the German manufacturer Ampack. The machine was last used by a dairy company, is in a well-maintained condition and is available immediately. Technical details Output: approx. 8,000 cups/hour Dosing units (servo-controlled): Pre-doser: 20 -250 ml Main doser: (80)100 -600 ml Cerialiser (tbd): 5-60 grams Free dosing space Current format sets 4 - corner ZKB, 8 - corner ZKB, round ZKB Control system: Siemens S7 Weight: approx. 25 tonnes Further information, pictures, and videos of the machine on request. Fgjlijvn Txqjkh Ugob

Condition: used, Year of construction: 1997, Overview  This cup filling machine was built in 1997 by the German manufacturer Ampack. The machine was in use until recently at a dairy company, is in a well-maintained condition and is available immediately. Please note that the machine is without control cabinets, tray erector and X-Ray. Technical details  Output: approx. 19,200 cups/hour (40 cycles/min on 8 lanes) 2 fillers: yoghurt + fruit/ rice pudding Control system: Siemens S5 Weight: approx. 11 tons Further information, pictures and videos of the machine on request Fgelikh Usvn Tyzsgsb

Condition: used, Year of construction: 2006, Overview This bread roll machine, type: Kemper Quadro Roll was built 2006 in Germany. The divider allows you to form dough of various shapes and sizes. The most important features of the device: Capacity: 6,000 pieces/h Number of rows: 5 Product: round or square Dough dividing range: 40 - 150 g (square rolls), 40 - 100 g (round rolls) working width 800mm Integration: Possibility of connecting the machine with the soaking and sprinkling station and the putting table. Technical Details 5 rows 400V/ 50Hz Scope of delivery Bread roll machine | Kemper | Quadro Round | 2006 Fgelikh Ujvq N Elsgsb

Condition: used, Year of construction: 2019, Overview  The inspector “Linos S2” was manufactured in 2019 by the German manufacturer Loell. The machine was regularly maintained by OEM and is still in operation. As the brewery is stopping the production on this line, they are no longer in need of this machine. Tech. Details Running direction: left-right Detections: Bottom inspection camera Sealing surface inspection camera Sidewall inspection camera Residual liquid and residual caustic detection Thread inspection Formats: 0,33 l Longneck (brown/green/white) 0,5l NRW (brown with crown cork) 0,5l NRW (white with thread) 0,5l Euro (brown) 0,33l Euro (brown) 0,33l Vichy (brown) 0,33l Gourmet Scope of delivery  Ejector after machine Foliovlxfqjkh Ugegb

Condition: used, Year of construction: 1999, Overview  The machine was built in 1999 by the German manufacturer Anker and is overhauled. The machine has run only a few hours a year and is therefore in good condition.  Technical data  Front label (belly+ chest wet glue), back label (wet glue) Running direction: right - left  Complete documentation  With a new bottle format and 2 new label formats  Freely selectable label dimensions Fgjlikhem D Ukms Ugjb

Condition: used, Year of construction: 1992, Overview This blowmoulder was built in 1992 from French manufacturer Sidel. It can produce up to 4.000 bottles per hour. Techn. Details Capacity: 4.000 bph 4 cavities Scope of delivery Blowmoulding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two types of molds for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL Fgsljnpbhvsikh Ugjb

Condition: used, Year of construction: 2017, Overview The CIP system from Diversey is used for stationary cleaning of filling machines and processing equipment in the beverage industry. This unit was developed between 2015 and 2017 and is now for sale as the customer quit the purchasing contract. Therefore it was not in use. It is properly stored and can be installed and implemented into an existing circuit by Diversey technicians. Furthermore there is the possibility to adapt the P&ID to the customer's needs. The CIP unit itself has no operator panel, as it will be implemented as slave system into the controle of a filling machine or other machine to be cleaned. It can be connected to an  Allen Bradley control system. It is installed in a stainless steel base frame and has a 500l tank. There are four pumps for the dosing of cleaning and disinfection media. Furthermore there is a heat exchanger heated by steam. In addition there are several measurement devices for temperature, flow rate, filling level and conductivity Tech Specs: Base frame stainless steel Control: can be connected to Allen Bradley control CIP pumpcapacity: 20 m^3/h Tank volume: 500l Number of dosing pumps: four Measurement devices: Temperature Flow rate Filling level Conductivity Features: Suitable for the cleaning of fillers, flash pasteurisers, mixers, syrup rooms as well as piping systems and tanks P&ID can be modified Dosing pumps from Prominent CIP Pump: Hilge Hygia 50/50/5,5/2 Fgelikhjl Hxlyo Ugob

Condition: used, Year of construction: 1990, Overview The filler was manufactured in 1990 by the German manufacturer Nagema. It was completely overhauled/modernised and also equipped with a new control system in 2022. With the double pre evacuation system it is suitable for beer also besides other carbonated drinks. After the overhauling of the machine, it has not yet been used again. It was planned for a brewery project, where the owner now decided to shift his production to a contract bottler. Therefore the machine is now available for sale. It is properly stored in a warehouse. Technical Specification: Capacity: 9000 bph on 330 ml Number of filling valves: 40 Number of capping elements: 10 Formats: 330 ml and 500 ml Products: beer and CSD Control: Siemens S7 with touch panel Fjlol Hxmhsikh Ugogb

Condition: used, Year of construction: 2006, Overview The BLOMAX 4 blow molder was manufactured by the German company SIG Corpoplast (now KHS) in 2006. It has been overhauled by a machine builder and can be inspected in dry operation. Blow molds are not included, but can be obtained.  Technical details  Output: up to 7,200 bph 4 cavities Dimensions: 4960 mm x 3900 mm x 3000 mm  Weight: 15 t  Operating hours: 44.736  Bottles Volume: 200 ml - 2000 ml   Max. Diameter: 115 mm  Max. Length: 350 mm Preforms  Length: 60 - 200 mm Max. Support ring diameter: 35 mm  Scope of delivery  Blow molder is completely equipped with the system for preform feeding (silo, elevator, sorting, chute) Fgjlikh Uel Hxpksgob

Condition: used, Year of construction: 2001, Overview The KSB3000 blowing machine was manufactured in 2001 by the Austrian machine builder KOSME. It is located at a machine builder and can be visited in dry run to see the functionality of the machine.  Technical details  Capacity: 3.600 bph  3 cavities Dimensions (LxWxH): 6830 mm x 2860 mm x 2450 mm  space requirement approx. 9x5 m²  weight: 4,5 t  Operating hours: 19.935   Bottles Volume: 250 ml - 2500 ml   Max. Diameter: 110 mm  Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed). Fgjlel Hxproikh Ugsb

Condition: used, Year of construction: 2013, Overview The bottle washer was manufactured by the German company Krones in 2013 and put into operation in 2014. It has been serviced annually. In addition, tenside lye cleaning and spare parts can still be purchased. DISMANTLING INCLUDED. Technical data  Capacity: 66,000 bph Maximum bottle diameter 69 mm Set up for the following formats:  Vichy 0,33l Long-Neck 0,33l Long-Neck 0,5l NRW 0,5l  Steinie 0,33l Fslikh Uol Hx Ensgsgb

Condition: used, Year of construction: 2016, Overview  The packer was manufactured in 2016 by the former German company Federspiel. It is located at a large German mineral well and is no longer in operation. The packer was removed at that time because it no longer met the performance requirements. Technical details Capacity: 3800 crates/h (at 0,7l)  Formats: 0,25l; 0,5l; 0,7l; 1,0l  Control Siemens S7 Multi gripper head with 2x12x8 grippers Bottle table  Bottle line-up block Fjlikh Ujl Hx E Ssgsgb

Condition: used, Year of construction: 2021, Overview The packaging machine was manufactured in 2021 by the Italian manufacturer V-Shapes. This compact machine dispenses various products into single sachets between 0.5ml and 25ml. The scope of delivery also includes the printer, which allows the sachets to be produced in-house. The machine can be visited in operation at any time. Technical Data Packaging machine | V-Shapes | PRIME | 2021 Production capacity: Up to 45 units/minute Time for packet size change: 15 minutes Number of packaging lines: 1 Maximum dimensions of film reels: Width 110mm/ 4.33 ” Diameter 250 mm Weight of film reels: 20 kg / 44.09 lb Film reel consumption: Up to 2625 mm /min Standard weld dimensions: 5 mm(± 1 mm) Machine colour: Steel Electronic parts: Standard IP55, IP67 on request Standard electronics: PLC 6 brushless motors                                               *Pneumatic dosage system: volumetric to measure Dimensions of V-Shapes packets: Height from 50 to 100mm/1.969” to 3.937” Width: from 40 to 100mm/1.575” to 3.937” Air Pressure: 7 bar Electric power: 20 Kwh Weight (maximum): 1000 kg / 6612lb Machine Footprint: 1500mm x 1000mm x 1000mm (H) Printer | AstroNova | T2-C | 2022 Print quality: 1600 x 1600 dpi or Print speed: 6 ips (152mm/sec) or 12 ips (300mm/sec) 4 external ink tanks á 2l Dimensions: 606mm x 580mm x 795mm Weight: 60 kg (without material) Folikh Uol Hx Rdsgogb

Condition: used, Year of construction: 2019, Overview   The machine was manufactured in 2019 by the American manufacturer CODI. Most recently, it was used to can flavored and carbonated mineral water. The machine has already been disassembled.  Techn. details  Capacity: 3.000 cans/ h  Formats  0.33 l standard  0,44 l Standard 0,33l Sleek  Volume of the filling tank: 64,2 l Voltage: 400-500 VAC  Frequency: 50-60 Hz Load current: 13 A  Felikjpzk Ahjh Ugogb

Condition: used, Year of construction: 2007, Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Running direction: counterclockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW Felikjqqz Txjh Ugsgb

Condition: used, Year of construction: 1998, Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 7.200 bph in 1,5L Number of moulds:  6 (molds not included) Equipped with quick change for shell molds Number of heating modules: 10 modules Neck personalization: 29/25      Working hours: 47.000 only         Machine was regularily maintained       Machine equipped with:            Sidel preforms elevator to unscrambler Sidel preforms unscrambler & feeder Sidel oven & blowing wheel for 6 molds Sidel electrical cabinet Sidel PCC drive & control panel Big set of spare parts list upon request Fslikhjrkgy Uj Ugogb

Condition: used, Year of construction: 1993, Overview  The following 6 component mixer was built in 1993 by the German manufacturer Famix. The mixer can be offered completely overhauled and with warranty. The machine is available immediately in its current condition.  Technical details  Capacity: max. 30,000 l/h beverage   6-component mixer  Dimensions (LxWxH): 3,200mm x 1750mm x 2800mm   Flow meter  Dosing pump  Vacuum degassing  Brix measurement  CO2 measurement  CO2 pressure control  Conductivity measurement   Electrical data  Operating voltage 400V/230 V 50 Hz  Control voltage 42V AC  Fslisvcp U Rekh Ugjgb

Condition: used, Year of construction: 2019, Overview  This complete filling line for cans from Canadian manufacturer Cask was built in 2019. It has been well maintained with regular servicing and is in great condition. Tech. Details  Capacity: 40 cans per minute, 2400 cans per hour. Can formats 330ml 440ml Can end spec: 202 end spec Dimensions (Floor):  6m x 2m Inline scale and auto-reject Post Rinse and can blow off Can height spacer set Conveyor extension Rotary collection table Packleader ELF-50 labeller with stand Domino AX 150i Inkjet Printer Cask Automated Can Depaletiser  2 x Twist Rinser Electronic Manual Fslikhou U D A Ie Ugjgb

Condition: used, Year of construction: 2000, Overview  The crate washer was manufactured in 2000 by the German company Bohrer. It is located at a German brewery and was part of a plant that has been shut down as it was replaced by a completely new line. In autumn 2024 the line was stopped and the machine was dismantled and stored.  Technical Details  Capacity: up to 2,000 crates/hour (can be adjusted from 500 - 2,500 crates/hour) Formats: crate of 12 bottles 700ml 356 x 275 x 346 travel direction crosswise crate of 20 bottles 250ml 360 x 275 x 255 travel direction crosswise crate of 20 bottles 500ml 400 x 300 x 290 travel direction crosswise crate of 20 bottles 500ml 400 x 333 x 260 travel direction crosswise Horizontal and vertical spray nozzles Spraying with hot caustic and fresh water Caustic heater with temperature regulation is integrated in the machine Machine is heated by steam Dimensions: Length: 4800mm Width: 900mm Height: 1400mm Weight: 1800kg Sieves for removal of dirt Incl. documentation Incl. spare parts list Incl. Electrical diagram Fgolikhjvm D Ume Ugob

Condition: used, Year of construction: 2002, Overview This universal smoke house, type: Bastra 1500 C was built in 2002 in Germany. Functions: reddening, drying, ripening, smoking, cooking, scalding, roasting, moistening, According to previous owners the machine was regularly serviced by Bastra customer service and was in operation until recently. Technical Details Electric heating (24 kW heating output) Width: 138 cm Height: approx. 255 cm Depth: 104 cm 1 trolley 100 x 85 x 168 cm (stock length 90 or 100 cm) Smoke generator: BASTRASMOKE (saw dust) Scope of delivery Smoke house| Bastra | Bastramat 1500 C| 2002 Fgjlikh Usvndpyegob

Condition: used, Year of construction: 2019, Overview  This atmospheric semi-automatic can filler from the brand Cask, 2019, is for sale because the owner is closing the business. It is still operational and can be inspected in person. Technical Details  600 cans/hour 2 filling heads CO₂ pre-purge Canning table Formats Slim 163 mL 187 mL 250 mL Sleek 250 mL 355 mL Standard 250 mL 330 mL 355 mL 375 mL 440 mL 473 mL 500 mL Dimensions Length [mm]: 1530 Height [mm]: 2008 Depth [mm]: 646 Power supply: 240 VAC, 50 Hz Scope of delivery includes FIAC SUPER SILENT 59 air compressor (required for lid sealer), 8 bar Fgelikjvtpg Uoh Ugeb

Condition: used, Year of construction: 2003, Overview This Automatic Double-Clipper, type: Polyclip ICA 8700 was built 2003 in Germany. The ICA 8700 is the ideal machine for medium sized to large diameter products up to a calibre of 180 mm. Fibrous, collagen and plastic casings can be processed. Ideally for the production of large volumes like slicer products and moulded ham. Technical details Width: 2,200 mm Depth: 910 mm Height: 1,950-2,150 mm Weight: 800 kg Electrical connection: 200-230 VAC, 380-460 VAC, 50 or 60 Hz Power consumption: 2.8 kW Fuse connection: 16 A Compressed air: 6 bar / 0.6 MPa Air consumption: Without overspreading 0.6 NL/cycle With overspreading 20 NL/cycle With looper 1.0 NL/cycle Scope of delivery Automatic Double-Clipper | POLYCLIP | ICA 8700 | 2003 Felikh Uevtrvfsgegb

Condition: used, Year of construction: 2002, Overview The blow molder was built in 2002 by the former manufacturer SIG Corpoplast (now KHS). The machine is still in operation and can be visited. Technical data Nominal capacity: 30,000 bottles/h Last used formats: 1.0L (27,000 bph) 1.25L (27,000 bph) 2.0L (22,500 bph) Bottle Volume: 200 - 3,000 ml Max. Diameter: 126 mm Length: 107 - 350 mm Preform Length: 60 - 200 mm Max. Diameter: 48 mm Dimensions (LxWxH): 9,920 mm x 6,279 mm x 3,357 mm Required space: 11,500 mm x 11,300 mm  Weight: 31.15 t Scope of delivery Blomax 20 Preform feeder Air transport Blomax 18 as spare parts dispenser Additional costs for spare parts, dismantling, packing and loading: EUR 45,000 Fgolory Iiwsikh Ugsb