Used machining centers (horizontal) X-axis travel over 1200mm for sale (65)

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Ibedpjxm Sxvjfx Ah Uof Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: used, Year of construction: 2007, x-travel 4000 mm y-travel 3000 mm z-travel 2200 mm control Siemens Sinumerik 840 D quill stroke 800 mm max. workpiece weight 20000 kg tool taper ISO 50 BIG PLUS DIN 69871 max. torque at the spindle 2346 Nm spindle diameter 160 mm total power requirement 65 kW weight of the machine ca. 50000 t dimensions of the machine ca. 12,8 x 11,8 x 5,7 m Work table - Clamping surface 2500 x 2000 mm - Table height above floor 800 mm Feed speed - x-axis 0.5 to 10000 mm/min - y-axis 0.5 to 10000 mm/min - Z-axis 0.5 to 10,000 mm/min - Rapid traverse (X/Y/Z) 25 / 25 / 25 m/min - Max. feed force (X/Y/Z) 28,000 / 27,000 / 28,000 N Spindle speeds in 1/min - Gear stage 1: 6 to 848 rpm - Gear stage 2: 850 to 3000 rpm Tool magazine: - 306 slots divided as follows: Number of slots max. length 700 mm: 54 Number of slots max. length 450 mm: 54 Number of slots max. length 300 mm: 63 Number of slots max. length 200 mm: 135 - Tool weight max. 35 kg - Tool diameter with free auxiliary slots max. 325 mm - Tool diameter without free secondary spaces max. 105 mm Accessories - Approx. 30 nos. SK 50 tool holders - 1 measuring probe - Coolant system/paper belt filter & chip conveyor - Cooler Ibodpfx Ajw Sfkkeh Usf - Oil mist extraction - Fixators - Documentation

Condition: used, Year of construction: 2008, operating hours: 792 h, total height: 2,800 mm, total length: 4,700 mm, total width: 2,900 mm, Empty weight: 10.000 kg Price: On request - Year: 2008 - Documentation available: Yes Iedpjxpvv Dsfx Ah Usbf - CE marking present: Yes - CE certificate present: No - Operating hours: 792 - Drive system: CNC - Horizontal/vertical: Horizontal - Control system brand: Fanuc - Control system type: 18i-MB - Power [kW]: 15.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 1400 - Y-axis travel [mm]: 800 - Z-axis travel [mm]: 700 - Table length [mm]: 1500 - Table width [mm]: 800 - Tool holder: ISO50 - Max. spindle speed [rpm]: 12000 - Options: Chip conveyor, Tool magazine - └ Tool magazine [pcs.]: 32 - Transport dimensions: 4700mm x 2900mm x 2800mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2014, Ref. -No.: 10553 Manufacturer: HANDTMANN / BAVIUS Type: HBZ Trunnion 120 Year of construction: 2014 Type of control: CNC Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany Machine-No.: 200XXXXX X-Travel: 1270 mm Y-Travel: 1100 mm Z-Travel: 900 mm Table Height: Ø 1200 mm Table Load: 2000 kg Max. Tool Weight: 20 kg Max. Tool Length: 90 x 200 / 24 x 400 mm Max. Tool Diameter: Ø 130 mm Tool Taper: HSK 100 Numbers Of Tools In Magazin: 40 Tool Piece Magazine With: 140 Pcs./pcs. Spindle Turning Speed - Stepless: 14.000 RPM Max. Torque: 15000 Nm Rapid Traverse X-Axis: max. 60 m / min Rapid Travel Y-Axis: max. 60 m / min Rapid Traverse Z-Axis: max. 60 m / min Machine length: 7500 mm Machine width: 5500 mm Machine Height: 3500 mm Weight Of The Machine Ca.: 26 t Rapid traverse C-axis: max. 25 RPM Rapid traverse A-axis: max. 20 RPM A-axis (swivel axis): - 30 / + 120 ° C-axis (rotary table axis): 360 ° Further information: - Horizontal machine, Y-axis arranged vertically - Machine stand designed as a welded construction - set up on height-adjustable precision wedge shoes, chip tray with cooling lubricant device, for external splash water cooling capacity: approx. 400 liters, with clean water pump, LP circuit, approx. 40 1/min at approx. 5 bar and rinsing nozzles on the Z-axis and/or the spindle Ijdsx Hn A Tspfx Ah Uobf - Complete safety housing - Stainless steel interior lining - Work area lighting - Manual loading door to the work area with polycarbonate safety window with glass front panel - Side viewing window to the work area with polycarbonate safety pane with glass front pane - Maintenance area freely accessible - HSK 100 hollow shank taper - Tool clamping via springs, tool release hydraulically - Tool clamping control - Cone cleaning - incl. spindle orientation

Condition: excellent (used), Year of construction: 2018, operating hours: 12,805 h, functionality: fully functional, travel distance X-axis: 2,900 mm, travel distance Y-axis: 1,900 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 45 m/min, controller manufacturer: Siemens, controller model: 840D SL, workpiece length (max.): 2,000 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 600 mm, total height: 3,700 mm, total length: 6,700 mm, total width: 3,000 mm, table width: 1,500 mm, table length: 2,000 mm, table load: 500 kg, overall weight: 8,000 kg, spindle speed (max.): 24,000 rpm, operating hours of spindle: 4,314 h, spindle motor power: 16 W, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a high-precision 5/6-axis CNC machining center, MAKA MK 7s, from MAKA Systems GmbH, equipped with Siemens SINUMERIK 840D SL control and OP15 PCU operating unit. The machine comes directly from production, is powered up, and can be inspected or demonstrated in operation at any time. It is in very well-maintained technical condition and has been serviced regularly. TECHNICAL HIGHLIGHTS: - 5-axis milling technology with retrofitted 6th axis (B-axis / Lehmann rotoFIX EA-530) - Spindle completely overhauled (2025, €18,000 investment) - Tool magazine with 20 positions (rotary table) - Tool holder: HSK A63, max. speed 24,000 rpm, output 16 kW - Rapid traverse: X/Y = 60 m/min, Z = 45 m/min - Positioning accuracy per axis: ± 0.1 mm/m, repeat accuracy: ± 0.05 mm/m - 3D wireless measuring probe, tool breakage detection, spray cooling unit - Rectangular frame table with zero-point clamping system and chip management (brushes, guide plates, conveyor belt) - Pneumatic/hydraulic workpiece clamping incl. hydraulic unit - Hydraulic system up to 210 bar (3 clamping circuits) - CAD data, technical documentation, and layout plan available WORKING RANGE & DIMENSIONS: - Travel (X/Y/Z): 2,900 / 1,900 / 1,000 mm - A-axis: 196° C-axis: 540° - B-axis (Lehmann rotary table): retrofitted, integrated with the control system Iodpsx Hv I Defx Ah Usbf - Working area: 2,000 × 1,000 × 600 mm - Machine weight: approx. 8 t - Dimensions (L × W × H): approx. 6.7 × 3.0 × 3.7 m FURTHER EQUIPMENT: - Saw blade pick-up station (Ø 450 mm) - Reinforced front doors, sheet metal safety enclosure with noise-reducing roof - Automatic safety sliding doors - Blowing nozzle in tool magazine (spindle cleaning) - Electrical connection: 400 V / 50 Hz – 19 kW – 43 A - Pneumatic connection: 6 bar / ½″ – air consumption approx. 800 l/h OPERATING HOURS / RUN TIMES: - Main power-on hours approx. 12,805 h (as of Oct 2025) The meter runs whenever the machine is powered—during setup, maintenance, or idle time as well. - Spindle run time: 4,314 h total The current spindle was fully renewed and overhauled in 2025 SPECIAL FEATURES: - Powered up – demonstration available at any time - Direct from production – not a dealer sale - Complete technical documentation available - Support with dismantling, loading, and transport available (for a fee) Price: €174,900 net – optionally incl. 6th axis (Lehmann) €199,000 Price is net, negotiable with quick turnaround. All details have been provided to the best of our knowledge and belief. Subject to change, error, and prior sale.

Condition: used, Year of construction: 2009, Offered here is a used machining center from the manufacturer Deckel Maho DMG. The machine is powered up and can be inspected at our facility. Free loaded on truck Manufacturer: DMG Deckel Maho Model: DMC 125 H duoBlock Year of manufacture: 2009 Control: Siemens 840 D Solutionline (PCU 50) Technical data: Travel distances X-, Y-, Z-axis: 1250 x 1000 x 1000 mm Feed rate X-, Y-, Z-axis: 20 - 60,000 mm/min Rapid traverse X-, Y-, Z-axis: 60 m/min B-axis travel: 360 x 0.001° B-axis feed rate: 10,800 °/min Max. rotation of table plate: 30 rpm Spindle speed: 20 - 8,000 rpm Gear stages: 2 Max. workpiece diameter: 1250 mm Max. workpiece height: 1580 mm Clamping surface: 800 x 800 mm Max. workpiece weight: 1,500 kg Weight of pallet: 570 kg Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Isdpfx Ajw Ew T Sjh Usbf Max. tool length: 650 mm Tool magazine: 120 positions Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of machine (without magazine or other accessories): approx. 20,000 kg Space requirement: approx. 7,000 x 6,000 mm Total machine weight: 24,000 kg Accessories: Chip conveyor with coolant tank Coolant system 4x machine pallets Tool magazine Oil mist extraction Various new spare parts: 1x Length measuring system Y-axis (new) 1x Lubrication unit 230V 0.12 30 bar (new) 1x ZAHNRADP-AGG*MKF1-KW2-20036 (new) 1x Cyclo gearbox *F1C-A25 (new) 1x Conversion kit power module (new) 1x Lifting devices for the machine

Condition: ready for operation (used), Year of construction: 2002, operating hours: 28,000 h, functionality: fully functional, travel distance X-axis: 1,850 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,525 mm, controller model: Fanuc 16 i- M , rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel path X: 1,850 mm Travel path Y: 1,250 mm Travel path Z: 1,525 mm Pallet changer type: double (2-station) Pallet size: 1,250 x 1,000 mm Tool changer: 80-station Tool holder: ISO 50 Drive power: 30 kW Spindle speed: 20–6,000 rpm Maximum workpiece weight: 5,000 kg Rotary table: 360 x 1° Feed rates – automatic programming: 0–15,000 mm/min Rapid traverse: 30 m/min MACHINE DETAILS Control unit: Fanuc 16i-M Total power requirement: 60 kW Dimensions & Weight Required installation space: approx. 8.3 x 7.3 x 4 m Ibodpfsx Dcb Njx Ah Usf Machine weight: approx. 27 t Operating Hours Total operating hours: 84,857 h Automatic mode hours: 31,451 h Spindle hours: 28,149 h EQUIPMENT Chip conveyor High-pressure cooling Internal coolant supply Approx. 300 SK 50 tool holders Renishaw measuring probe Filter belt system with internal cooling (IKZ) Extraction system

Condition: ready for operation (used), Year of construction: 2009, operating hours: 15,716 h, Control Unit Brand SIEMENS Model 840 D Main Drive Spindle motor power 37 kW Number of axis 4 Movement X-Axis Movement 1200 mm Y-Axis Movement 1000 mm Z-Axis Movement 1200 mm Tools Ibodpfx Asx D Rn Rsh Uof Number of index 320 Type of tool holder SK50 Additional Equipment Magazine Capacity: 32 Euro pallet spaces for raw material Pallet Size: 630x800 mm Pallet Spaces: 32 This 4-axis HULLER HILLE NBH 230 horizontal machining center was manufactured in 2009. Ideal for precision engineering, it offers robust construction and reliable performance. Consider the opportunity to buy this HULLER HILLE NBH 230 horizontal machining center. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2012, operating hours: 44,900 h, functionality: fully functional, machine/vehicle number: 16504, Equipment: chip conveyor, Pallet changer: -> included Spindle: -> HSK63 tool holder -> Speed 20,000 rpm Linear axes: -> X-axis 750 mm -> Y-axis 750 mm -> Z-axis 725 mm Tool changer: -> 60 stations This machine used a single cooling unit together with another machine (lot 2770012). The cooling unit (lot 2770249) is offered separately. This machine does NOT include a cooling unit. The machine/plant does not include any product-related tools, fixtures, or grippers (robots). Iodjx Him Hspfx Ah Uebf Spindle hours approx. 25,600 Operating hours approx. 44,900

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Ibjdpfx Aju Dahnsh Uof Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: used, Year of construction: 2014, Make: HANDTMANN, Model: HBZ Trunnion 80, Year of manufacture: 2014, Serial No. 200793, Control unit by Heidenhain, Type TNC640, Travel distances X/Y/Z: 850 x 850 x 700 mm, A-axis max. -30/+120°, C-axis 360°, Tool holder: HSK 63A, Max. workpiece size: Ø 850 x 630 mm, Max. workpiece weight: 1,200 kg, 40-position tool changer, NC rotary/swivel table, Table diameter: 800 mm, Maximum spindle speed: 30,000 rpm, Chip conveyor by Knoll, Model 600K-3, Band filter system by Knoll, Electrical cabinet by Knoll, Control defective, Travel paths: 850 x 850 x 700 mm Ibjdpfx Ahex A U Ulj Ujf This machine is part of an online auction. Images will be provided later.

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, Kao Ming Radial drilling machine. Technically in very good condition. Incl. drill cube and various tools Load 100mm. Ibodpfowhcnajx Ah Uef Capacity Ø50mm.

Condition: repair required (used), Year of construction: 2009, functionality: not functional, travel distance X-axis: 7,400 mm, travel distance Y-axis: 1,460 mm, travel distance Z-axis: 620 mm, 7.4 Mtr 4-Axis machining centre for sale as spares or repair. X-Axis travel 7400mm, Y-Axis travel 1460mm, Z-Axis travel 620mm, A-Axis +/- 90 deg, Electrospindle power 5.5kw. Ibodpfxjw Nwrue Ah Uef Pros: New spindle in head in last 5 years, new clipper unit in last 5 years, many new cables in last 12 months. Cons: Head doesn't move and we've been told it could be the motor but this isn't 100% guaranteed. This will be sold as seen with no guarantee. Any inspection is welcome. The perimeter soundproof cabinet IS NOT included in the sale. The buyer will be responsible for the removal and transportation from our premises. Please note: Price advertised is + VAT.

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 3500 mm Measurements depth 6000 mm Measurements height 3400 mm Machine weight 7000 kg Main Drive Spindle speed range 24000 rpm Spindle motor power 10 kW Tool taper HSK 63F Ibedjx D Dlcopfx Ah Uef Number of axis 5 Movement X-Axis Movement 2900 mm Y-Axis Movement 1740 mm Z-Axis Movement 1050 mm Tools Max weight 3 kg Additional Equipment Maka protective enclosure, open at the top and with two manually opening doors at the front This 5-axis MAKA MK 7s was manufactured in 2007. It features a robust 7000 kg frame, operates on 400V/50Hz, and has a rated power of 18.5 kW. The machine includes a BWO 910 RC control system and a versatile HSK 63F milling spindle. Its linear tool magazine holds tools and saw blades, complemented by an aluminum surface table measuring 2000 x 1000 mm. Consider the opportunity to buy this MAKA MK 7s horizontal machining centre. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2011, operating hours: 50,500 h, functionality: fully functional, machine/vehicle number: 16520, Equipment: chip conveyor, Pallet changer: -> included Spindle: -> HSK63 tool holder -> Speed 20,000 rpm Linear axes: Ijdpsx Himtsfx Ah Ujbf -> X-axis 750 mm -> Y-axis 750 mm -> Z-axis 725 mm Tool changer: -> 60 stations This unit shared a single cooling unit with another device (lot 2770012). This unit does NOT include a cooling unit. The machine/system does not include product-specific tools/fixtures or grippers (robot).

Condition: as good as new (ex-display), Year of construction: 2023, travel distance X-axis: 1,450 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,035 mm, Highlights: - fastest chip-to-chip time in this workspace dimension - Optimum footprint - Automation “ready” _____ G720F machining center X-axis travel = 1450 mm Y-axis travel = 1200 mm Z-axis travel = 1035 mm Interference diameter 1,500 mm (2x) table load 2x 750 kg Work area lighting Machine control Siemens Sinumerik ONE HT10 handheld control unit Motorized spindle 17,000 min-1, 64 Nm GROB spindle diagnosis (GSD) for twin-spindle machines Tool magazine, HSK-A-63 with 80 (2x40) tool pockets Tool loading lift for parallel loading and unloading of tools during machining time mechanic-tactile tool breakage check HSK taper shaft cleaning Air blow-off gun Inspection window for viewing the tool change area/tool robot Lighting in the tool change area/tool robot Minimum quantity lubrication unit for two spindles as single-channel Minimum quantity lubrication unit pressure booster Decentralized exhaust system MQL Scraper conveyor with wear plate Isdpfx Ahotiyzds Uebf Basic installation Clamping functionality Evaluation unit for monitoring support evaluation unit for clamping monitoring - volume flow Preparation for process-related measurement (Renishaw) Renishaw RMP400 extra long measuring probe Loading, directly into the machine by the operator Two-hand operation, incl. automatic opening at the end of the cycle HVO console Preparation for direct loading into the machine by robot Machine status light

Condition: good (used), Year of construction: 2012, Ref. -No.: 10558 Manufacturer: YOU JI Type: HMC 1200 BP Year of construction: 2012 Type of control: CNC Control: FANUC Series 18i-MB Storage location: Halberstadt Ibedpfjxxpbxex Ah Usf Country of origin: Taiwan X-Travel: 1800 mm Y-Travel: 1500 mm Z-Travel: 1360 + 990 mm B-Axis: 360 ° W-Axis: 700 mm Table Dimensions (Lengthxwidth): 1200 x 1400 mm Table Load: 5.000 kg Max. Tool Weight: 25 kg Max. Tool Length: 400 mm Max. Tool Diameter: 125 mm Spindle Speed: 30 - 3.500 RPM Numbers Of Pallets: 2 Further information: 4-axis simultaneous machining IKZ (internal spindle cooling) AKZ (external spindle cooling) Synchronized walking (rigid thread cutting) Renishaw RMP60 workpiece probe (radio) Number of pallet changers for automatic pallet change: 2 Size: 1200 x 1400 mm Tool magazine, number of tools: 60 The machine is currently in production and can be viewed by appointment.

Condition: used, Year of construction: 2005, Technical details: x-travel: 2200 mm y-travel: 2200 mm z-travel: 1400 mm spindle taper ISO: 50 spindle diameter in front bearing: 110 mm spindle turning speed range: 45 - 6000 U/min pallet table size: 1000 x 1250 mm pallet worktable capacity: 6000 kg feed range: 1 - 60000 rapid traverse: 60 m/min spindle drive motor: 27 kW Ijdpfovgmitjx Ah Ujbf dimensions of the machine ca.: 15 x 8,5 x 5,7 m total power requirement: 133 kVA weight of the machine ca.: 50 t Machine with SIEMENS 840 D control - full B-axis - palette changer for 3 palettes - tool changer for 244 tools - coolant through spindle - max. workpiece swing 2200 mm *

Condition: good (used), Year of construction: 2008, operating hours: 29,000 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,800 mm, 4-axis machining centre in heavy-duty design with multi-pallet changer Travels / Axes Axes travels: X 2,600 mm, Y 1,500 mm, Z 1,800 mm B-axis: 360,000 positions (continuous) Rapid traverse linear axes: 35 m/min B-axis speed: 8 rpm Linear axis accuracy (VDI 3441) Positioning accuracy P: 10 µm Repeatability Ps: 5 µm “U” head (horizontal / vertical) Interface: ISO SK 50 Ibodpfx Ahjxwztde Usf Main spindle speed range: 37–6,000 rpm Spindle power: 44 kW Max. torque: 706 Nm Tool magazine 208 tool stations, vertical rack magazine Max. tool length: 600 mm Max. tool diameter: 450 mm Max. tool weight: 35 kg Front transpallet / pallet changer APC: 360,000 positions 4 fixed stations Rotary unit for loading and unloading of workpieces 6 pallets 1,000 x 1,250 mm Plant supervisor: CswWin CNC control CNC control: Siemens 840D Option: SL 1B Operate Remote operator panel for tool data input The machine is in excellent condition and ready for immediate operation. Includes high-grade filtration system, hydraulic unit, chip conveyor and pallet systems. Several hundred tool holders can be purchased additionally on request. The line has to be removed from the plant in January 2026 and is in principle already available before that date and ready for short-notice delivery.

Condition: ready for operation (used), Year of construction: 2008, Main Drive Spindle speed range 7000 Tool taper SK50 Number of axis 4 Movement Ijdpfx Asx D Hq Ueh Uebf X-Axis Movement 1300 mm Y-Axis Movement 1100 mm Z-Axis Movement 1000 mm Workpiece Workpiece X 1250 mm Workpiece Y 1250 mm Table Outer length 800 mm Outer width 800 mm Table load 2200 kg Tools Max weight 30 kg Max tool diameter 135 mm / 260 mm Max tool length 500 mm This 4-axis Mazak FH 8800 horizontal machining center was manufactured in 2008. It features a pallet size of 800 x 800 mm, a maximum workpiece weight of 2200 kg, and a maximum spindle speed of 7000 rpm. With 80 tool positions and a table indexing of 0.001° for precise control, the Mazak FH 8800 machine we have for sale represents a robust opportunity for precision machining. Contact us for further details regarding this horizontal machining center. Application Types Milling

Condition: used, Year of construction: 2013, operating hours: 45,500 h, functionality: fully functional, machine/vehicle number: 16546, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Pallet Changer: -> Included Spindle: -> Tool holder: HSK63 -> Speed: 20,000 rpm Linear Axes: -> X-axis: 750 mm -> Y-axis: 750 mm -> Z-axis: 725 mm Tool Changer: -> 60 positions This machine is equipped with a coolant filtration system with chiller. • Manufacturer: KNOLL Maschinenbau GmbH / HYFRA Industriekühlanlagen GmbH • Model: PF 210 (Knoll) + TRK30-EF-S (Hyfra Pedia) • Year of manufacture: 2012 • Serial numbers: Iodpfx Asx Hilvoh Ujbf  - KNOLL: 501973 / 201139433  - HYFRA: 12030089 • Electrical connection: 3×400 V / 50 Hz • Control voltage: 24 V DC • Power consumption: 11.1 kW (Knoll) + 4.8 kW (Hyfra) • Fuse protection: 16 / 25 A (Knoll), 16 A (Hyfra) • Cooling capacity (chiller): 3.8 kW at 42 °C • Refrigerant: R134a, 1.6 kg • Max. pressure: 20 bar • Weight (with coolant): 140 kg Note: Machine/asset does not include any product-related tools, fixtures, or robot grippers. Spindle hours: approx. 9,300 Operating hours: approx. 45,500

Condition: used, Year of construction: 2005, Technical details: x-travel: 1800 mm y-travel: 1600 mm z-travel: 1400 mm B-axis (table): 360° size of pallet: 1000 x 1250 mm workpiece swing dia.: 2100 mm workpiece weight: 3500 kg spindle taper ISO: 50 spindle drive motor: 37 kW spindle turning speed range: 25 - 10000 U/min feed range: 40/50 m/min rapid power traverse circular: 10 U/min total power requirement: 90 kVA Isdpovgcrkefx Ah Ujbf weight of the machine ca.: 43 t dimensions of the machine ca.: 11 x 9 x 4,5 m Machine with SIemens 840 D control for 4 axis - full B-axis - palette changer - tool changer for 150 tools - coolant device with coolant through spindle - chip conveyor *

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand HAAS Main Drive Tool taper SK 50 Number of axis 4 Movement X-Axis Movement 1626 mm X-Axis Rapid Traverse 15.2 m/min each Y-Axis Movement 1270 mm Y-Axis Rapid Traverse 15.2 m/min each Z-Axis Movement 814 mm Z-Axis Rapid Traverse 15.2 m/min each Workpiece Workpiece weight 4536 kg Media Chip conveyor Yes Additional Equipment Coolant tank with low and high pressure pumps 2 chip conveyors with screw This 4-axis HAAS EC-1600 was manufactured in 2008. It features a large table (1626 mm x 814 mm) with an integrated 4th axis rotary table, a milling spindle SK 50, and a 30+1 tool changer. The machine can handle workpieces up to 4,536 kg and includes dual chip conveyors. If you are looking to get high-quality milling capabilities, consider the HAAS EC-1600 machine we have for sale. Contact us for more information. Application Types Ibjdpex D Eppefx Ah Usf Milling

Condition: ready for operation (used), Year of construction: 2006, operating hours: 48,659 h, Control Unit Model 840D PL Brand SIEMENS Main Drive Number of spindles 1 Spindle speed range 7000 rpm Spindle motor power 43 kW Tool taper HSK 100 Number of axis 4 Movement Ibsdpfex D Swgox Ah Uof X-Axis Movement 1250 mm Y-Axis Movement 1000 mm Z-Axis Movement 1000 mm Table Outer length 800 mm Outer width 800 mm Number of tslots 234 Media Internal cooling Yes Additional Equipment KNOLL Coolant System, VRF 250, IKZ 50 bar Rotary table with 360,000° x 0.001° positioning Infrared receiver for measuring probe (BLUM) Multi-spindle head mount Quick drill breakage control (SBBK) Code chip for tools runtime and quantity recording Integrated process monitoring (IPM) Disk blowing device for operator door Evacuation strategy This 4-axis HELLER MCH 350 was manufactured in 2006, featuring a Siemens 840D PL control system and a robust spindle capable of 7,000 rpm. It includes a HSK 100 tool clamping system and a large magazine with 234 slots. The machine offers a substantial working area of 1250 x 1000 x 1000 mm and a pallet size of 800 x 800 mm. For more information about this machining centre, please reach out to us. Application Types Milling

Condition: ready for operation (used), Year of construction: 1998, Control Unit Brand SIEMENS Model Sinumerik 840C Iedpfox D Nr Iex Ah Uebf Main Drive Spindle speed range 6000 Tool taper SK50 Movement X-Axis Movement 1200 mm Y-Axis Movement 800 mm Z-Axis Movement 800 mm Tools Max tool length 750 mm This Burkhardt-Weber MC 80 was manufactured in 1998. It features a spindle speed of 6,000 rpm, a maximum feed rate of 25 m/min, and a tool capacity of 80 with SK50 adapters. The CNC Siemens Sinumerik 840C control system enhances its precision. Consider the opportunity to buy this Burkhardt-Weber MC 80 horizontal machining centre. Contact us for more information. Application Types Milling