Used machining centers (universal) over 1000mm X-axis travel for sale (150)

Condition: reconditioned (used), Year of construction: 2014, Immediately Available: Traveling Column Machine FS 2100 • Total travel in X axis: 21,000 mm – ideal for flexible large-part machining • Travel distances: X = 21,000 mm, Y = 1,500 mm, Z = 3,500 mm • iTNC 530 control with wireless HR 550 FS handwheel, operator cabin on the traveling column • 2-axis NC universal drilling/milling head, fully simultaneous and positioning mode per traveling column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • ICS air up to 6 bar • Dust protection packages for the safeguarding of guideways and drives • BA 4 per traveling column • Wireless probe RMP 60 by Renishaw • Work area monitoring with network camera and monitor located on the rear of the system • Process monitoring with ToolScope basic system • Additional control panel on the rear of the system • Partial enclosure of the working area and sheet metal door, rear side equipped with a safety fence for unobstructed view into the work area • Including fixators • Cooling aggregates • Including internal tool cooling (closed-loop system) with cooling unit • Short delivery time, immediately available – subject to prior sale – Inspection possible by appointment Ksdpfext En Dsx Ahzowt Spindle hours: approx. 9,079 SPECIAL PRICE!

Condition: good (used), Year of construction: 2002, Universal Machining Center Machine type: DMG DMU 200 P Control: Heidenhain TNC 430 M Year of manufacture: 2002 TECHNICAL DATA: Travel paths: X-axis: 1,800 mm Y-axis: 2,000 mm Z-axis: 1,100 mm Kjdpfx Ahjxuqn Sezewt B-axis: 0.001° C-axis: 0.001° Number of controlled axes: 5 Speed range: 10,000 rpm Drive power: 44 kW Tool holder: SK 50 Tool changer Tool stations: 60 NC rotary table Table size: 1,700 x 1,400 mm Max. table load: 5,000 kg Equipment features: Chip conveyor Internal coolant supply (IKZ): 40 bar Paper band filter Measuring probe Electronic handwheel

Condition: excellent (used), 5-Axis Machining Center with swivel milling head, pallet station, tool calibration, thermal compensation, work area extraction system, and much more. Year of manufacture: 2016 Spindle hours approx. 1,500 h (after spindle replacement at the beginning of 2025) Control System: - Heidenhain iTNC 530 HSCI - Heidenhain DCM Collision Monitoring - Heidenhain HR 410 electronic handwheel - Swiveling console with 19" monitor - Teleservice via LAN/WLAN Travel Range: - Travel X 1,000 mm, Y 1,100 mm, Z 810 mm - NC rotary table D 1,000 x 800 mm, swing diameter 1,350 mm Milling Head: - Automatic horizontal/vertical swivel milling head - Fully-fledged stepless NC axis from -1° to +90° - Blowing air through the spindle - External coolant supply via nozzle ring Drive power: 38 kW (100% duty cycle) Speed: 16,000 rpm Torque: 135 Nm at 40% duty cycle Spindle interface: HSK 63-A Media Supply: - Internal coolant feed: 50 bar - capacity 28 l/min - Paper belt filter with additional fine filter - Individual tool pressure regulation during program operation Tool Changer: - Rack magazine with 73 stations (expandable with additional racks) - Swiveling dialog operation panel - Drawer for loading and unloading tools from tool racks Tool Measurement: - 3D wireless touch probe m&h 20.00-Multi, software adapted for HSK 63-A - Including Kinematics-Opt, compatible with iTNC control, and calibration sphere on magnetic stand Pallet Changer: - Double palletizing unit, pallet diameter 1,000 x 800 mm, hole grid 100mm x 100mm, hardened drill bushes D 16mm - Rotary table unit including zero-point clamping system, loading station accessible by crane - Pallet changer unit protected with enclosure Special Equipment: - Micro-Epsilon sensor - For detection and dynamic compensation of thermal spindle growth Chip Conveyor: - Scraper belt conveyor along machine bed - Chip ejection height 1,100 mm Kjdpsxhg Disfx Ahzowt Machine Enclosure: - Full-area protective enclosure with large angle door for crane loading and a quick-access door - Easy removal of swarf from the workspace Extraction System: - Oil and emulsion mist extraction, mechanical air filter, extraction capacity 1,800 m³/h Rotating View Window: - Viewing window integrated into the cabin door for workspace observation Camera in Work Area: - Monitor and keyboard at the operator console—allows monitoring of rear-side machining operations Machine Data: - Space requirement (without service area): approx. LxWxH 4,791 mm x 4,100 mm x 4,791 mm (including extraction system) - Machine weight approx. 19,700 kg - Total weight with all equipment plus maximum workpiece load, full tool magazine, and all operating materials: approx. 27,730 kg - Connected load: 50 kVA, 400V, 50/60 Hz This machining center, featuring an exceptionally good and practical configuration, is in very good condition. It operates with the renowned "Swiss precision." There is no service or repair backlog—in fact, the opposite. With an almost new milling spindle, the REIDEN RX 10 5X is well positioned for long-term use. Technical modifications and errors excepted.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 23,576 h, functionality: fully functional, machine/vehicle number: 10980001683, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, controller model: Heidenhain, workpiece length (max.): 300 mm, workpiece width (max.): 160 mm, rotational speed (max.): 18,000 rpm, overall weight: 13,000 kg, spindle speed (min.): 20 rpm, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, I am selling here a DMG 125 P 5-axis machine Simultaneous 60 tool slots, the tools are included in the total price Inspection possible at any time Kwedpfswqpnlox Ahzjt The machine was running until recently and is fully functional.

Condition: used, Year of construction: 2016, operating hours: 24,000 h, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 880 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 100 m/min, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, feed rate Z-axis: 100 m/min, table load: 400 kg, spindle speed (min.): 10,000 rpm, operating hours of spindle: 500 h, spindle motor power: 40,000 W, number of slots in tool magazine: 36, tool length: 520 mm, tool diameter: 205 mm, 5-Axis Working Area: -> X-axis 1500 mm -> Y-axis 1250 mm -> Z-axis 880 mm Feed / Rapid Traverse: -> X-axis 100 m/min -> Y-, Z-axis 100 m/min Axis Acceleration: -> X-, Y-axis 7 m/s² -> Z-axis 10 m/s² -> Jerk 150 m/s³ Table Load Capacity: -> Max. weight 400 kg Spindle: -> Tool holder HSK 100 -> Speed range 10,000 rpm -> Power (S6/40% duty) 40 kW -> Max. torque 175 Nm Tool Magazine: -> Positions 36 Kwsdpjxtndzefx Ahzjt -> Max. tool length 520 mm -> Max. tool diameter (with free adjacent slot) 205 mm -> Max. tool weight 20 kg -> Total load 200 kg -> Tool change time 3 s Machine/Asset does not include any product-related tool, fixture or gripper (robot).

Condition: ready for operation (used), Year of construction: 2018, operating hours: 11,000 h, Control Unit Kodpfjx D D Eisx Ahzowt Brand HEIDENHAIN Main Drive Spindle speed range 15000 Number of axis 5 Movement Z-Axis Movement 700 mm X-Axis Movement 1350 mm X-Axis Rapid Traverse 30 m/min Y-Axis Movement 1150 mm Y-Axis Rapid Traverse 30 m/min Workpiece Workpiece weight 1600 kg Table Table load 1600 kg Tools Slots in storage 30 This 5-axis +GF+ MIKRON HPM 1350U was manufactured in 2018. Ideal for advanced machining, this universal machining centre ensures precision and efficiency. Consider the opportunity to buy this +GF+ MIKRON HPM 1350U universal machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2012, General Data Machine weight 21000 kg Main Drive Spindle speed range 18000 Number of axis 5 Kjdpfx Ahox D Eh Ejzewt Movement X-Axis Movement 1000 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 1250 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 1000 mm Z-Axis Rapid Traverse 60 m/min Workpiece Workpiece weight 2000 kg Tools Type of tool holder HSK-A63 This 5-axis DMG MORI DMC 100U duoBlock was manufactured in 2012. It features a pallet clamping surface of 1000 × 800 mm, rapid traverse rates up to 60 m/min, and a high-speed spindle at 18,000 rpm. The machine includes a 60-position tool changer and a 980-litre coolant system. Accessories like a chip conveyor, oil mist collector, and BLUM laser tool measurement enhance its functionality. If you are looking to get high-quality milling capabilities consider the DMG MORI DMC 100U duoBlock machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2005, x-travel 1.000 mm y-travel 1.000 mm z-travel 1.000 mm Control 840 D Siemens turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 Nm tool taper HSK-A63 swivellable B: -30 / +180 ° swivle time 1,2 s numbers of pallets 2 size of pallet 1.000 x 800 mm max. workpiece weight 1.500 kg rotatable C: 360 ° number of toolpositions 180 pos. tool taper HSK-A63 total power requirement 78 kVA weight of the machine ca. 27,0 t dimensions of the machine ca. 8,0 x 7,0 x 3,4 m 5 Axis - CNC Machining Center Universal DECKEL MAHO - DMC 100 U duoBLOCK - Swivel-Milling-Head (B-Achse) - NC-Rotary (C-Axis) - pallet changer - 180-pos. tool-changer - WITHOUT zero point clamping system - WITHOUT RINGLER exhaust - WITHOUT tools Kwsdpfx Ahjwf Rgfezet

Condition: used, Year of construction: 2013, x-travel 1.520 mm y-travel 520 mm z-travel 420 mm control 840 Dsl Operate Siemens Max. rpm 12.000 min/-1 power capacity - main spindel 19 kW Torque 121 Nm tool taper SK 40 table diameter 500 mm rotatable C: 360 ° swivellable B: -90° / +110 ° max. table load 500 kg table speed 25 min/-1 resolution 0,001 ° table surface area 920 x 540 mm number of toolpositions 54 pos. max. tool weight 7 kg max. tool length 290 mm max. tool diameter 130 mm max. tool-dia with free toolbox 130 mm weight of the machine ca. 10,5 t dimensions of the machine ca. 4,4 x 3,5 x 3,1 m 5 Axis-Machiningcenter Universal SPINNER - U5 1520 - NC-Swiveling Rotary Table Kodpfxevmr R Ne Ahzswt - 5 axis simultaneous - Spindlehours: ca. 13.282h - incl. zero-point clamping system - new spindle installed (2020) - WITHOUT tools - WITHOUT vices

Condition: reconditioned (used), Year of construction: 2014, Immediately available: Traveling column machine FS 1200 • Total travel X=12,000 mm, ideal for flexible large-scale machining • Travel X=12,000 mm, Y=1,500 mm; Z=3500mm • Control iTNC 530 with wireless radio handwheel HR 550 FS, operator cabin on the traveling column • 2-axis NC universal drilling, milling head, fully simultaneous and positioning operation per traveling column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • IKZ air up to 6 bar • Dust protection packages to protect the guides and drives • BA 4 per traveling column • Radio measuring probe RMP 60, Renishaw make • Work area monitoring with network camera and monitor on the back of the system • Process monitoring ToolScope basic system • Additional control panel on the back of the system • Partial housing consisting of work area and sheet metal door, back with protective fence with a clear view into the work area • incl. fixators • Cooling units • incl. internal tool cooling (closed cooling circuit) with Cooling unit • short delivery time, available immediately, ---subject to prior sale--- Viewing possible by arrangement Spindle hours: approx. 9079 Kwedpfx Aoxmr Uqehzjt SPECIAL PRICE!

Condition: ready for operation (used), Year of construction: 2021, Control Unit Brand HEIDENHAIN Model iTNC530 HSCI Main Drive Spindle speed range 20-28000 rpm Spindle motor power 55/43.5 kW (40/100%DC) Movement X-Axis Movement 1050 mm Y-Axis Movement 800 mm Z-Axis Movement 560 mm Additional Equipment Tool Taper: HSK-A63 DIN 69893 / Tool Magazine: 30-position disk tool magazine, 60-position pickup chain type Scraper Belt Chip Conveyor and Machine Bed Flushing / Separate Water Treatment Unit: 980-liter tank and paper filter / Pump: 40 bar / 23 l/min for internal cooling through spindle / Extended Chip Flushing / Rotating Inspection Window / Manual Coolant Flushing Gun / Internal Compressed Air Cooling: Through spindle / EROWA Pallet Handling System Preparation Documentation: English, Hungarian / Display Text: German/Hungarian / Screen Text: German/Hungarian DMG MORI Monitoring: D-ME406* DMG MORI Messenger V4 / DMG MORI Software Solutions: DMG MORI Service Agent, DMG MORI NETSERVICE, DMG MORI IoTconnector Kwjdpfx Aox D D Tgjhzot This 5-axis DMG MORI HSC 105 universal machining center was manufactured in 2021. It offers advanced capabilities for precision machining. Consider the opportunity to buy this DMG MORI HSC 105 universal machining center. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 9911832, travel distance X-axis: 10,600 mm, travel distance Y-axis: 1,570 mm, travel distance Z-axis: 740 mm, rapid traverse X-axis: 70 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 40 m/min, total height: 2,760 mm, total length: 11,900 mm, total width: 4,500 mm, overall weight: 10,500 kg, spindle motor power: 10 W, spindle nose: HSK F63, tool length: 150 mm, tool diameter: 20 mm, tool weight: 3,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, MECAL MC302 GEOS-5 5-AXIS MACHINING CENTRE, manufactured in 2014 in Italy, is designed for milling, drilling, tapping, and cutting of profiles made from aluminium alloys and plastics. The machine, equipped with top-quality components and innovative solutions, can process both on a single workspace and within two separate working zones, which significantly increases speed and production efficiency. Simultaneous machining in two working areas is possible thanks to the longitudinal worktable with a sliding machining station and chip conveyor. The MECAL machining centre for aluminium profiles achieves high structural rigidity due to its base made from high-grade steel tubes. During operation, the profile is held in place by special clamps with an independent power supply system, allowing for positioning and automatic repositioning of each individual clamp in a very short time. All 5 axes (X, Y, Z, A, C), driven by motors with digital systems, move along automatically lubricated precision guides. The MECAL GEOS-5 machining centre is offered with 3D software, providing a high level of programming flexibility, user-friendly operation, and an intuitive graphical interface. Kwodpfeu Dl R Uox Ahzst Technical specifications of the MECAL MC302 GEOS-5 profile machining centre: - Number of axes: 5 (X, Y, Z, A, C) - Y/Z axis travel: 1570/740 mm - Spindle tilt (A axis): ±120° - Spindle rotation (C axis): ±210° - Rapid traverse (X/Y/Z axis): 70/60/40 m/min - 3D graphical software - Tool magazine capacity: 18 - Maximum electrospindle speed: 24,000 rpm - Electrospindle power: 12 kW - Maximum blade diameter: 500 mm - Maximum diameter of side and end mill: 200 mm - Centralised lubrication

Condition: good (used), Year of construction: 2019, operating hours: 1,994 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Fanuc, controller model: Fanuc 31i-B, spindle speed (max.): 10,000 rpm, number of spindles: 1, mount diameter: 100 mm, Operating hours: 7194 / usage time: 1994 Year of construction: 2019 Control unit: Fanuc 31i-B Spindle: PC100i (10.000 1/min) Tool clamping system: HSK 100 Tool magazine / places (Options): Chain/50 Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, KF 400, IKZ 70 bar Positioning range XYZ (mm): 1000 / 1000 / 1000 Pallet size (mm): 630 X 630 Workpiece clamping: Hydraulic 80 bar Kwodpfsvvmnuox Ahzst Additonal options, Specifics: HELLER facing slide unit; Receiver for measuring probe (RENISHAW); Coolant temperature control; forward looking collision avoidance; Interface for exhaust system; 3 colour status lamp; work area flush; Scraping conveyor for wet machining; Fast drill fracture sensing (SBBK); multi-spindle-head support (MSK); Thermal growth compensation; Feed force display; Automatic loading sequence; Automatic unloading sequence; increased tool weight 35kg; tool codechip; Since response emails from Maschinensucher often end up in the spam folder, we kindly ask you to regularly check this folder or contact us directly.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,200 mm, spindle speed (max.): 5,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Travel X-axis travel: 2,000 mm Y-axis travel: 1,000 mm Z-axis travel: 1,200 mm Main Spindle Speed range: 20 - 5,000 rpm Gear stages: 2 Drive power: 30 kW (100%) / 45 kW (40%) Torque: 1,050 Nm / 1,580 Nm Tool holder: HSK 100 B-axis swivel range: +/- 180° B-axis increment: 0.001° Work Table Clamping area: 1,000 x 2,000 mm Max. table load: 4,000 kg T-slot spacing: 100 mm T-slots: 18 H7 Number of T-slots: 10 Tool Magazine Number of tool positions: 40 Tool holder: HSK 100 Tool change time: 10 s Max. tool diameter: 250 mm Max. tool length: 400 mm Max. tool weight: 20 kg Feed Rates Feed rate X, Y, Z: 0 - 20,000 mm/min Feed rate B: 10 min⁻¹ Ksdpfx Ahoxb A Azjzjwt Power X, Z: 15.7 kW Power Y: 8.5 kW Power B: 2.5 kW Feed force: 22,500 N MACHINE DETAILS Space Requirements & Weight Space requirement approx.: 8.0 x 8.0 x 3.3 m Machine weight approx.: 23,000 kg EQUIPMENT 2x tool cabinets for holders Ringler chip extractor Chip conveyor Coolant system High-pressure cooling Internal coolant supply Oil mist extraction Paper band filter Spindle oil cooler Blum TC 60 probe Electronic handwheel Automatic door

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 700 mm, controller manufacturer: HEIDENHAIN, controller model: i TNC 530, total height: 3,090 mm, table load: 1,600 kg, overall weight: 12,600 kg, spindle speed (max.): 15,000 rpm, swivel angle A-axis (min.): -15 °, swivel angle A-axis (max.): 136 °, number of axes: 5, General Data Measurements width 2300 mm Measurements depth 5100 mm Measurements height 3090 mm Machine weight 12600 kg Control Unit Brand HEIDENHAIN Model i TNC 530 Main Drive Spindle speed range 15000 Spindle motor power HSK-A 63 Number of axis 5 Movement X-Axis Movement 1350 mm Y-Axis Movement 1150 mm Z-Axis Movement 700 mm A-Axis Movement 136° (-16 +120) Table Table load 1600 kg Additional Equipment A.P. cooling through spindle Chip evacuation Tool control with Dual Laser Radio frequency touch probe Air through spindle APS (Advanced Process System) ITC (Intelligent Thermal Control) This 5-axis MIKRON HPM 1350U was manufactured in 2009. A universal machining centre, it offers advanced capabilities for diverse and complex machining tasks. If you are looking to get high-quality milling capabilities, consider the MIKRON HPM 1350U machine we have for sale. Contact us for more information. Application Types Milling Kwedsx D I Nxjpfx Ahzst

Condition: good (used), Year of construction: 2000, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, Excellent overall condition. Used by a plastic mold maker, primarily for engraving work. Low cutting forces, low machine load... Travel ranges x=1200 y=800 z=500 Spindle speed 0-8000 rpm / Main spindle drive power 11 kW / Feed rate 0-30 m/min / Table dimensions 1320 x 800 mm Max. table load 2,000 kg / 20-station tool changer / Max. tool diameter 63 mm / Tool length 200 mm / Tool holder SK 40 / 3D measuring probe, Heidenhain, type TS 220 / Coolant system / Chip conveyor / Extractor (optional) / Complete enclosure Heidenhain control type TNC 426 PB digital / Electronic handwheel Heidenhain HR 410 ENGLISH: Excellent overall condition. Used by a plastic mold maker, primarily for engraving work. Low cutting forces, low machine load... Travel paths x=1200 y=800 z=500 Spindle speed 0-8000 rpm / Main spindle drive power 11 kW / Feed rate 0-30 m/min / Table dimensions 1320 x 800 mm Max. table load 2,000 kg / 20-station tool changer / Max. tool diameter 63 mm / Tool length 200 mm / Tool holder SK 40 / 3D measuring probe, Heidenhain, type TS 220 / Coolant system / Chip conveyor / Extractor (optional) / Complete enclosure Heidenhain control type TNC 426 PB digital / Electronic handwheel Heidenhain HR 410 Kjdpfoxxkllox Ahzowt

Condition: not inspected (used), Year of construction: 2001, operating hours: 3,260 h, functionality: unexamined, machine/vehicle number: 730, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 685 mm, workpiece weight (max.): 1,500 kg, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Bidding obligates the buyer to collect the machine within the specified period from 01.12.2025 to 05.12.2025! TECHNICAL DETAILS Travel distances Travel X: 1,350 mm Travel Y: 1,150 mm Travel Z (vertical): 685 mm Travel Z (horizontal): 870 mm Spindle Working spindle speed: 0 – 12,000 rpm Acceleration time: approx. 2.5 s Tool holder: HSK-A63 Tool data Tool magazine: 46-position changer Number of magazine positions: 46 Max. tool diameter (all positions): 80 mm Max. tool diameter (some positions): 130 mm Max. tool weight: 8 kg Max. tool length: 300 mm Max. magazine load: 200 kg Chip-to-chip time: approx. 9–12 sec, tool-to-tool Feed rates and rapid traverse Rapid traverse X, Y, Z: 30 m/min Table NC rotary table diameter: 1,100 mm Clamping surface: Ø 1,100 x 1,000 mm Kwsdpfx Ahexm Tx Dozjt Table load capacity: 1,500 kg Centering bore: Ø 50H6 Table height above floor: approx. 1,120 mm Swivel axis (A-axis): +15° to -120° Control system: HEIDENHAIN TNC 426 MACHINE DETAILS Spindle hours: 3,260 h Machine on-time: 82,797 h Dimensions & weight Machine weight: approx. 12,000 kg Required space (L x W x H): 4,130 x 3,680 x 3,150 mm EQUIPMENT RENISHAW OMP60 probe Technical documentation Note: Transport will likely be arranged via truck with a loading width of 3,000 mm.

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 5,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 800 mm, spindle speed (min.): 60 rpm, spindle speed (max.): 6,000 rpm, spindle nose: SK40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, AXA VHC 2 - 5000M Retrofit Siemens 840C SK40 / 36 tools Table 5000x500mm Coolant 700l Good condition. Can be inspected under power with chips. Kwjdpfx Ahsw Tkz Rezet

Condition: good (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: Bosch Rexroth, controller model: IndraMotion 10, rotary table diameter: 800 mm, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: AC, short taper mount: 63 mm, swivel angle B-axis (max.): 105 °, swivel angle C-axis (max.): 360 °, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis gantry-type machining center with 3,000 mm travel on the X-axis, 600 mm on the Y-axis, and 800 mm on the Z-axis. The B-axis swivels ±105° and the C-axis rotates 360°. Turning package: Enables high-precision turning operations in combination with standard milling and facilitates both turning and milling in a single setup. Rotary table speed: 500 rpm. Rota S Plus 800 chuck by Schunk. Kwsdpfoxn Ikdex Ahzjt The operating hours counter is defective.

Condition: good (used), Year of construction: 2004, Maho DMC 160 U Duoblock, year of manufacture 2004, Mill Plus control, X/Y/Z travel 1600/1250/1000 mm, double pallet 1,250 x 1,000 mm, spindle speed up to 10,000 rpm, SK 50 taper, 120-tool magazine, rack-type tool magazine, high-pressure coolant, chip conveyor, band filter, rotary table (C axis), horizontal/vertical head. Kwsdpfx Ahsxmhzaszjt

Condition: good (used), Year of construction: 2004, travel distance X-axis: 6,000 mm, travel distance Y-axis: 630 mm, Chiron Mill 6000 / 2013, completely overhauled by Chiron. Year of manufacture: 2004 / overhauled in 2013. Equipped with Siemens 840D control system. Travel X/Y: 6000/630 mm. Pendulum machining possible. 92-position tool changer. HSK-A 63 tool holder. Spindle speed up to 12,000 rpm. Spindle replaced in 2021. NC swivel milling head. Hydraulic unit with 210 bar. 2 hydraulic clamping circuits. Separate clamping pressure control per pendulum field. Clamping pressure monitoring. Pneumatic workpiece stop. 2 separately controllable pneumatic lifting devices. Brankamp collision monitoring system. Scraper belt conveyor. OKZ prepared. Knoll vacuum rotation filter. Rotating viewing window. Automatic loading doors. 5-axis milling package. IKZ 70 bar (internal coolant supply at 70 bar). Oil mist extraction. Pendulum machining possible. Pendulum machining X-axis travel: 1773 mm with face machining (tool length: 120 mm). Linear clamping system with 8 vices. Kwodpfx Ahew N Nvfozst

Condition: good (used), Year of construction: 1999, Hermle U 1000 T, Kjdewlqimspfx Ahzewt Built in 1999, Heidenhain TNC 426 control, X/Y/Z travel 1000/630/550 mm, 16-station tool changer, SK 40 tool holder, Spindle speed up to 7,000 rpm, Vertical spindle quill stroke 75 mm, Universal milling head 0-90°, Direct measuring systems, Table size 1200 x 630 mm, Heidenhain TS 632 touch probe, Electronic handwheel,

Condition: excellent (used), Year of construction: 2004, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, rotary table diameter: 1,500 mm, spindle speed (min.): 18,000 rpm, spindle speed (max.): 18,000 rpm, Heidenhain iTNC 530 control Tool changer for 60 tools Automatic head 180/-7° stepless Kjdpow Ngk Hsfx Ahzowt

Condition: excellent (used), Year of construction: 2002, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, workpiece height (max.): 1,230 mm, workpiece diameter (max.): 1,250 mm, spindle speed (min.): 18,000 rpm, spindle speed (max.): 18,000 rpm, Heidenhain iTNC 530 control Tool changer for 60 tools Automatic head +180/-7° stepless HSK A63 Number of pallets: 2 pcs Kodpfx Ajw Ngipjhzewt Pallet size: 1000*800 mm

Condition: new, Year of construction: 2023, X= 3500mm Y= 1200mm Z= 1500mm carousel dressing table Ø 1.250mm Kwedpohqhq Nofx Ahzot Clamping table 3.500 x 1.000mm Control Heidenhain automatic indexing milling head / 2 planes, 90°|45° / 2,5° x 2,5° Splash guard 5-sided Cable handwheel 2xchip conveyor 60 tool changer