Condition: used, Used Winkworth model PV63-25 approximately 63 litre stainless steel process vessel. Unit has a flat top with half hinged lid and welded dished bottom head and includes pneumatically operated raise and lower mechanism. Unit measures approximately 600mm diameter x 450mm straight side. External stainless steel jacket rated 3.5 bar design pressure at 200 deg.c. Unit has a top entry stainless steel contra rotating gate type paddle agitator driven by 1.1kW geared-motor producing 33.6rpm and a 0.75kW geared-motor producing 76.4rpm . Unit has a bottom entry offset Silverson BE275 homogeniser with a square hole disintegrating head driven by a 0.75kW motor. Unit has a local control panel and is mounted on a stand with (4) legs. Djdpfjymayvjx Ag Reur

Condition: used, Comprehensively tested and refurbished, used Winkworth model model RT400 stainless steel high speed ploughshare (T-Arm) mixer. Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2016 Duodoymayijpfx Ag Ror Capacity: 400 litre (product dependent) Mixing trough: 1,300mm long x 800mm diameter. Type Of Blades: T-Arm ploughshare blades with drive/gearbox. A video of this mixer is available below. Specifications: Bowl Volume: 105.7 gal Material Of Construction: Stainless steel Dimensions: 1300mm long x 800mm diameter

Condition: used, Comprehensively tested, used Winkworth reportedly model GU660 stainless steel ribbon blender. Manufacturer: Winkworth Material: Stainless steel Capacity: 660 litre (product dependent) Mixing trough: 1,750mm long x 700mm wide x 790mm deep Discharge Type: air operated discharge value Type Of Blades: single interupted ribbon Motor: 7.5kw, 1450rpm, 415volt, 3/50 motor through Opperman type HTM7 gearbox rated 38.2/1 reduction rated, 37rpm output. Also includes: Hinged lid with clamps. Dodpfxsymax Se Ag Rour -Control panel with castell key interlock. -Mild steel mobile base. A video of this mixer is available below. Specifications: Capacity: 23.3 ft³ Material of construction: Stainless steel Width: 27.56" Horsepower: 10 hp Length: 68.9" Dimensions: 68.90in x 27.56in x 31.10in

Condition: used, Used Molteni model MPME700SV-TDS stainless steel triple action vacuum mixer. Manufacturer: Molteni. Dujdpfoymaxrex Ag Rer Material: Stainless steel. Capacity: Mixing pan approximately 700 litres. Type of blades: (1) high speed disperser driven by a 48kw motor, (1) high speed disperser driven by a 36.5kw motor and (1) anchor type agitator driven by a 18.5kW Exd rated motor. Also includes: Hydraulically operated raise and lower. For details about the refurbishment work, contact a member of our sales team. Equipped With: Per RD 28/08/25 on hold for potential inspection 24/09/25, 25/09/25 or 26/09/25.

Condition: used, Comprehensively tested, used stainless steel Aeromatic Fielder model GP1 VP mixer / granulator. Manufacturer: Aeromatic Material: Stainless Steel Capacity: 10 litres Type of Blades: Bottom entry 3-blade mixer with drive, and a side entry chopper. Also includes: Jacketed removeable bowl and local controls. Various inserts to reduce bowl capacity. Unit is mounted on mobile base. Dusdpoymaxlofx Ag Rsr

Condition: used, Used Enrico Molteni model ED30 stainless steel disperser. Unit is driven by 22kw motor. Has stainless steel mixing pot with clamping section. Includes hydraulic powerpack for raise & lower. Djdpfxoymaxfj Ag Reur

Condition: used, Comprehensively tested and refurbished, used Greaves Model SH 15 stainless steel high shear mixer. Shaft approximately 1750mm long x 150mm diameter general purpose disintegrating head. Unit is direct driven by 11kw 415volt 3/50 motor. Reportedly suitable for 500-2000 litre batches. Dsdpfx Aeymawhjg Rjur Click on the link below to see a video of the machine running.

Condition: used, This listing is for the Broadley James Flow Controller S/601. Dusdpfx Agoyw Iwfs Ror The unit is in full working condition and ready for immediate use. This precision gas flow controller is designed for demanding bioprocessing environments. It features a clear digital interface for accurate monitoring and control of flow rates, ensuring optimal conditions for cell culture and fermentation. Robust and dependable, it integrates seamlessly into existing laboratory workflows

Condition: excellent (used), Complete line direct from Bankrupt company which was filling capsules and tablets into small tubs. Bottlea are loaded into the line from lazy susan, product is counted and doses into the tub or bottle which is then foil sealed before the screw lid is applied. All machines were bought new in 2015 and appear to be in excellent condition. The counter is a Vitacount 12-1 Dusdpfx Ajw Hz T Esg Ror

Condition: used, tank capacity: 20,000 l, 20,000 liter horizontal storage tank made of V2A stainless steel with propeller agitator Duodpjyfwm Rsfx Ag Rsr

Condition: used, tank capacity: 2,500 l, 2500 liter heatable/coolable mixing tank made of V2A stainless steel with propeller agitator Duodpeyfwnusfx Ag Rsr

Condition: used, tank capacity: 1,200 l, 1200 liter insulated mixing tank made of V2A stainless steel with cross-blade agitator Duodpfx Agjyfwplj Rer

Condition: used, tank capacity: 30 l, GENERAL Design: vertical Speed: 27.9 - 142.9 rpm Total width: 1,000 mm Total height: 1,680 mm Total length: 1,500 mm Heating/Cooling: available Dusdpox Dlm Iefx Ag Ror Power: 0.37 kW Max. permissible operating temperature: 151 °C Max. permissible operating pressure: 4.0 bar Max. overpressure: 1.0 bar Top cover: removable/hinged top cover Agitator: anchor agitator Agitator tool: homogeniser Mounting type: frame Nameplate: Vacuum: 1.0 bar Volume: 30 litres Jacket volume: 1.6 litres Condition: used Last application: pharmaceutical VESSEL Max. permissible operating temperature: 120 °C Bottom: conical bottom AGITATOR 2 Agitator arrangement: bottom-mounted AGITATOR 1 Voltage: 220/380 Volt Agitator arrangement: centrally mounted in the top cover Agitator equipment: anchor agitator with Teflon scrapers; the drive power of 10 kW indicated on the nameplate most likely refers to the homogeniser

Condition: used, tank capacity: 500 l, GENERAL Design: upright Remarks: 2 semi-circular openings in the top cover (1 lid made of V2A stainless steel; 1 lid made of plastic) Outer diameter: 1,100 mm Inner diameter: 940 mm Total height: 1,650 mm Heating/cooling: available Insulation: available Support type: height-adjustable feet Location: Bremen Cylinder temperature control: half-pipe coil Volume: 500 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 790 mm Last used for: cosmetics TANK Number of feet: 3 units HEATING/COOLING JACKET Bottom temperature control: half-pipe coil Dujdpfxjx Dmacs Ag Rer INSULATION Insulation jacket: hermetically welded Insulation material: stainless steel EQUIPMENT Manway/access hatch: in the top cover Note: minor residues/adherences Outlet: 50 mm MATERIAL SPECIFICATIONS Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: Level indicator (without guarantee) Design: upright Remarks: Manhole diameter: approx. 420 x 320 mm Internal diameter: 820 mm Total height: 2,350 mm Heating/Cooling: available Max. permissible operating overpressure: 6.0 bar Base type: feet Location: external storage Technical documents: drawing Cylinder tempering: Thermoplate Volume: 1,000 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: factory new Cylindrical height: 1,238 mm TANK Number of feet: 3 pcs EQUIPMENT Djdpjx Dmbgefx Ag Rsur Manhole / Dome: in the cylinder Outlet: DN50 DIN 11851 MATERIAL CHARACTERISTICS Exterior surface: marbled

Condition: used, tank capacity: 53,000 l, GENERAL Construction: horizontal Remarks: 3 reinforcement rings made of Fe, each with 2 feet (Note: tank diameter is lower than the tank feet; consider this during installation); 1 manhole in the front dished end Internal diameter: 3,000 mm Total length: 7,900 mm Heating/cooling: available Location: outdoor storage Cylinder temperature control: rectangular half-pipe coil Duedpfx Asyciyqeg Rjr Name plate: Volume: 53,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical length: 6,750 mm Previous use: brewery TANK Support design: feet Number of feet: 6 pieces EQUIPMENT Outlet: available MATERIAL CHARACTERISTICS Temperature control system material: V2A 1.4301 (AISI304) Feet material: steel

Year of construction: 1995, condition: used, GENERAL Heat exchange surface: 4.8 m² Year of manufacture: 1995 Remarks: One cooler does not have a nameplate. The coolers have different connections. Insulation: available Location: Bremen Nameplate: Dodpfx Ajxqcmlsg Rjur Condition: used SHELL SIDE Shell side volume: 210 liters TUBE SIDE Tube side volume: 60 liters

Condition: used, tank capacity: 42,300 l, 42,300-liter upright storage tank made of stainless steel (V2A) Djdpfxoyfwmwj Ag Rsur

Condition: used, tank capacity: 1,023 l, 1023 liter stackable container made of V2A stainless steel Dusdpsyfwprjfx Ag Ror

Condition: used, GENERAL Impeller diameter: 200 mm Agitator: Propeller Other: Total length approx. 1,060 mm Location: Bremen Shaft diameter: 35 mm Shaft length: 910 mm Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Dusdpfx Ajx Dlnrjg Rjr

Condition: used, Year of construction: 2006, tank capacity: 10,000 l, GENERAL INFORMATION Equipment: Crane lugs Design: Vertical Year of manufacture: 2006 Remarks: Nameplate no longer available; cylinder manhole diameter 600 mm; minor dent on the side of the vessel Internal diameter: 2,500 mm Total height: 3,800 mm Power: 3 kW Top head: Flat bottom Agitator: Beam agitator Support design: Height-adjustable feet Location: Outdoor storage Technical documentation: Drawing Volume: 10,000 liters Cylinder wall thickness: 3 mm Product-contact material: V4A 1.4401/04 (AISI316) Condition: Used Cylindrical height: 2,000 mm Last product processed: Sludge VESSEL Max. allowable operating temperature: 80 °C Specific gravity of medium: 1.8 (to/m³) Bottom head: Conical bottom Number of feet: 3 pcs EQUIPMENT Manhole/Dome: In cylinder, in top head (Ø 430 mm) Outlet: Flange DN80 Note: Minor residues MATERIAL SPECIFICATION Foot material: Stainless steel Dodpfox Dmbaex Ag Reur AGITATOR 1 Agitator manufacturer: Fluid Voltage: 380/660 volts TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4 mm Agitator positioning: Eccentric in top head

Condition: used, tank capacity: 25,000 l, GENERAL Design: vertical Dujdpfx Asx Dmcweg Rjr Remarks: Base ring made of V2A; wall thickness of the lower cylinder half approx. 6 mm; extensive documentation available; vessel already dismantled and stored; one vessel with insulation, which shows damage and should be renewed if necessary. Internal diameter: 2,400 mm Total height: 7,200 mm Base type: base ring Location: 2 x Bremen; 1 x external warehouse Technical documentation: drawing, various documents Nameplate: Volume: 25,000 liters Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 5,400 mm Last application: pharmaceutical chemicals EQUIPMENT Manhole / dome: on top head (DN 600) Outlet: available Comment: manhole cover plated TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.3 mm Top head wall thickness: 5.8 mm

Condition: used, tank capacity: 1,540 l, GENERAL INFORMATION Equipment: Spray head Design: vertical Remarks: Homogenizer mounted on the bottom (see photos) is included in the scope of delivery Heating/cooling: available Insulation: available Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.0 bar Agitator: propeller Agitators: 2 agitators Agitator type: anchor agitator Location: external storage Cylinder temperature control: double jacketed Nameplate: Volume: 1,540 liters Double jacket volume: 100.0 liters Product-contact material: V2A 1.4301 (AISI 304) Dujdpjycirgofx Ag Rjr Condition: used Previous application: pharmaceutical TANK Max. permissible operating temperature: 200 °C Support style: height-adjustable legs Number of legs: 3 pieces INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole/dome: on the upper head AGITATOR Agitator mounting: on the tank Agitator equipment: Scrapers are mounted on the anchor agitator (see photos) AGITATOR 2 Agitator mounting: on the tank

Condition: used, tank capacity: 1,000 l, GENERAL INFORMATION Construction: upright Remarks: Manhole diameter approx. 420 mm Internal diameter: 1,190 mm Total height: 2,550 mm Max. overpressure: 2.0 bar Location: Bremen Nameplate: Vacuum: 1.0 bar Volume: 1,000 litres Product-contact material: V4A 1.4429 (AISI316) Condition: used Cylindrical height: 950 mm Duodjycix Tepfx Ag Rsr Previous use: biochemistry TANK Max. permissible operating temperature: 200 °C Stand type: feet Number of feet: 4 pcs EQUIPMENT Manhole / dome: in top head Outlet: 53 mm Note: slight residues, manhole cover plated MATERIAL SPECIFICATION Foot material: steel

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: Butterfly valve Design: Container Remarks: DN 100 handhole in the top head (in some cases the union nut is missing); minor dents possible in some units Internal diameter: 1,000 mm Overall height: 1,850 mm Max. overpressure: 2.0 bar Location: 26 x Bremen, 49 x external warehouse Technical documentation: Drawing Nameplate: Volume: 1,000 liters Cylinder wall thickness: 2 mm Product-contact material: V2A 1.4301 (AISI304) Condition: Used Cylindrical height: 965 mm Last application: Food industry TANK Max. allowed operating temperature: 130 °C Base type: Frame Number of feet: 4 units EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL PROPERTIES Foot material: Stainless steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 2.5 mm Top wall thickness: 2 mm Dodpjyciy Dofx Ag Rsur