Condition: used, Year of construction: 2017, Offered for sale is a rotary screw compressor with an integrated refrigerant dryer. Volume flow rate: 1.82m³/min, operating pressure: 9.75bar. Controller: Atlas Copco Elektronikon Graphic with display. Equipped with an integrated refrigerant dryer (FF version) and emergency stop switch. Inspection possible by arrangement. Dcedpfxe Ad Nqbj Apmep

Condition: used, Year of construction: 2018, functionality: fully functional, total length: 120 mm, total width: 800 mm, power: 15 kW (20.39 HP), pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, Equipment: documentation/manual, refrigerant dryer, type plate available, Kaeser SK25T screw compressor SIGMA Control 2 compressor control system Equipped with ABT25 refrigerant dryer Operating pressure: 11 bar Dcode Afc Dkepfx Apmop A suitable, used pressure vessel with a volume of 1000 liters is also available as an option.

Condition: excellent (used), Year of construction: 2004, Fini Cube 10- This is a compact 10HP industrial screw compressor. It can deliver max pressure of 10 bar with a 7.5KW electric motor. I was purchased in 2004 and was serviced on a yearly basis by the fully trained technicians of the local Fini agents. Dedpezluihjfx Apmjcp This compressor was used as a back up compressor to our Fini BSC 20 compressor so it was only used periodically to ensure it functionality when required. It come complete with an MTA air dryer.

Condition: repair required (used), Year of construction: 1996, operating hours: 444 h, Atlas Copco GA 7 Rotary Screw Compressor – 7.5 kW – Year of Manufacture: 1996 Sale on behalf of a customer! For sale is a used rotary screw compressor from the renowned manufacturer Atlas Copco, model GA 7, built in 1996. The compressor has been in storage for a very long time. For this reason, it is being sold as defective / for parts. Technical Specifications: • Manufacturer: Atlas Copco • Model: GA 7 • Year of manufacture: 1996 • Motor power: 7.5 kW • Max. pressure: 7.5 bar • Delivery rate: 1,140 l/min • Control system: Elektronikon II Dcedpfe Adu H Usx Apmsp • Displayed operating hours: 444 h • Condition: Used Important note regarding operating hours: The original controller was replaced with a different unit. Therefore, the currently displayed 444 operating hours cannot be verified as the actual total runtime of the compressor. The actual total operating hours are unknown.

Year of construction: 2011, condition: good (used), For sale is our DWT nitrogen generator – Ecoinert. The DWT Ecoinert nitrogen generators (N₂) are compact, on-site systems from the German manufacturer DWT GmbH, specifically designed for inertization in industrial 3D printing (SLA/SLS/metal), for LC-MS laboratory applications, and for manual laser welding (AI mode). In most cases, this generator is used in 3D printing and ensures excellent results. Year of manufacture: 2011 Inspection is possible and welcome. In good condition. Dcodpfj Aa Sq Aex Apmep

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: CAI965725, overall weight: 470 kg, power: 22 kW (29.91 HP), pressure (max.): 7 bar, type of cooling: air, Equipment: compressed air system, compressor, type plate available, The Worthington RLR 30E V G10 is a lubricated compressor, ideal for those seeking a robust and efficient machine. Manufactured by the renowned WORTHINGTON brand, this specific model is well-suited for a range of industrial applications thanks to its capability to operate at 7 bar pressure. Djdpey Eyr Rsfx Apmjcp Weighing 470 kg, it is designed to deliver stable and continuous performance while remaining relatively compact for its category. This used compressor maintains the high quality and reliability expected from the Worthington name. This piece of compression equipment is a viable solution for businesses looking to optimize their performance while managing costs effectively. Its robustness and technical specifications make it a relevant choice for those who prioritize both durability and efficiency.

Condition: good (used), Year of construction: 1994, machine/vehicle number: 149804-5, Offer 26195 - Operating hours: 63,733 h - Operating pressure: 8 bar - Delivery rate: 5.93 m³/min - Drive: 400 V / 37 kW - Motor speed: 3000 rpm - Suction pressure: 1 bar Djdpfxe Ah Ea Do Apmocp - Space requirement: approx. W 1000 x H 1450 x D 1300 mm - Weight: approx. 560 kg

Condition: good (used), Year of construction: 2011, Kaeser Sigma Air Manager (SAM) 8/4 – used: Price ex works: €2,750 (net) plus disassembly, etc. Manufacturer: Kaeser Type: SAM 8/4 Year of manufacture: 2011 Serial number: 2015 Part number: 7.7731.1 0-10 bar 100-240V/1/N/PE/50|60Hz Dcjdpfxoz Sd I Ho Apmop 0.7 - 0.35 A SWASAMX.A-01020.01 Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia

Condition: good (used), Year of construction: 2010, Kaeser SX3T Compressor Dcsdpfxjuqckko Apmop Serial: 2268 2010, 2.2Kw, 11.0Bar, 3Ph

Condition: good (used), Year of construction: 2010, Kaeser SX3T Compressor Serial: 2266 Djdpeuqckdjfx Apmscp 2010, 2.2Kw, 11.0Bar, 3Ph

Condition: good (used), Year of construction: 1994, machine/vehicle number: 149804-6, Offer 26196 - Operating hours: 70,428 h Dcodj Ah Eh Sjpfx Apmjp - Operating pressure: 8 bar - Delivery rate: 5.93 m³/min - Drive: 400 V / 37 kW - Motor speed: 3000 rpm - Suction pressure: 1 bar - Space requirement: approx. W 1000 x H 1450 x D 1300 mm - Weight: approx. 560 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, ATLAS COPCO GA26VSD+ screw compressor, equipped with a frequency converter, recently serviced. Technical specifications: Capacity: 5.15 m3/min; Engine power: 26 kW; Maximum pressure: 13 bar; Year: 2015; Operating hours: 9845 h. Dodpjy Idhnofx Apmscp Price: 30,900 net. Price: 38,007 gross. The compressor is in full working order, ready for operation, and comes with a warranty. We also provide service support. Link to video below.

Condition: new, Year of construction: 2025, Viber-Air Power: 7.5 kW / 7.5 HP Motor speed: 3000 rpm Tank capacity: 500 liters Voltage and frequency: 400V / 50Hz Water resistance: IP23 Noise level: 65 dB Operating pressure: 10 bar Air flow: 800 l/min. Drive type: direct drive Outlet diameter: G 3/4 Dehumidifier: TR-10HP Cooling: Air Screw manufacturer: BAOSI Inverter: Included Display: HTK070 Dimensions (length/width/height): 1900/800/1660 mm Weight: 390 kg Suction capacity: 950 l/min Dcsdpfsxdbvrex Apmop Discharge capacity: 800 l/min

Condition: used, Year of construction: 2007, operating hours: 73,989 h, functionality: fully functional, power: 25 kW (33.99 HP), volume flow: 316.2 m³/h, pressure (max.): 8.5 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, type of cooling: air, Equipment: documentation/manual, type plate available, For sale is a used KAESER rotary screw compressor, model ASD 47 SFC, with a 25 kW drive power, frequency control, and a heat exchanger for heat recovery. The integrated heat recovery system allows the heat generated during compressor operation to be used, for example, to heat domestic hot water, heating water, or for other operational heat processes. This enables the efficient reuse of the waste heat generated during operation. Technical data: Manufacturer: KAESER Kompressoren Type: ASD 47 SFC Year of manufacture: 2007 Serial number: 3705 Dcodpfx Apjz Eqa Tjmop Rated power: 25.0 kW Motor speed: 3,000 rpm Max. operating pressure: 8.5 bar Frequency-controlled drive: SFC Control system: KAESER SIGMA CONTROL Heat exchanger for heat recovery Ambient temperature: 3–45 °C CE marking present Operating hours according to display: approx. 73,989 h Load hours according to display: approx. 72,914 h

Condition: used, The new, cold-regenerating adsorption dryer from Parker Zander combines proven and reliable elements of adsorption technology and impresses with its clear concept. Notable features of the K-MT adsorption dryer series include: • Adsorber profiles manufactured in one piece • Separately controlled main and blow-off valves in a leak-proof design • Compact check valve combination, guaranteeing continuous operational reliability and high availability. All adsorption dryers in the K-MT series feature: • Self-cleaning sieve trays on the wet side • High-quality drying agents During adsorption, the drying agent stores the moisture contained in the compressed air. Parker Zander exclusively uses highly active molecular sieve drying agents with a high capacity. This drying agent guarantees a long service life, even at high inlet temperatures or low pressure dew points. Regeneration takes place in counterflow to the adsorption process. A portion of the dried compressed air is depressurized to atmospheric pressure and passed through the drying agent bed to be regenerated. The moisture stored during adsorption is removed with the partial flow of dry regeneration air. The regeneration air requirement of 14.3% for cold-regenerating adsorption dryers refers to: • Operating pressure of 7 bar • Inlet temperature of 35°C • Pressure dew point of -40°C • in a cycle with • 5 minutes adsorption • 4 minutes desorption • 1 minute pressurization The Parker Zander 10-minute cycle, with 5 minutes of adsorption, includes 12 load changes per hour. The commonly used 6-minute cycle, with 3 minutes of adsorption, requires 20 load changes per hour and, therefore, inevitably 5.6% more regeneration. The Parker Zander 10-minute cycle saves energy costs while reducing wear and tear. Multitronic, the control system • with new, groundbreaking functions and in a new design, is perfectly tailored to the cold-regenerating adsorption dryers of the K-MT series. • It enables the highly effective adaptation of the adsorption dryer, even to extremely diverse operating conditions. • From the permanently visually recognizable status to the pressure dew point control of the adsorption dryer, the benefits for the operator are clearly evident with Multitronic. Dcsdpfxoypb Due Apmsp • The Multitronic system, housed in a clear and easily accessible control cabinet, offers: • A comfortable microprocessor control for all Parker Zander heatless dryer systems • Flexible adjustment of the cycle times is possible. • LEDs on the front for the individual functions, such as • Operation • Adsorption • Desorption • Selector switch I-0-2 for fixed cycles or variable cycles as a synchronous control with the compressor Possible options: • Direct pressure dew point measurement including digital display • A potential-free output for the pressure dew point limit value • The ability to set the desired dew point in the range of -25°C to -40°C. Technical data: K-MT 8 Capacity m³/h: 72 Connection: G ½ Pressure bar: 16 Weight kg: 77 Electrical connection Watt: 50 Year of construction: 2009 Manufacturer's price: €8,880

Condition: good (used), Year of construction: 2000, Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, screw block compressor stage from compressor type SL 270 -Screw block: Type BS 430 -Final pressure: max. 15.0 bar Dodpopm Thtsfx Apmocp -Hole circle: Ø 295 mm / M20 / Ø 740x22 mm -Shaft: Ø 100 x 200 mm -Dimensions: 1200/850/H790 mm -Weight: 917 kg

Condition: good (used), Year of construction: 2003, machine/vehicle number: AII 146363, Offer 26333 Dcedpfxe Ahhyke Apmjp Technical data: - Total operating hours: 56167 h - Operating pressure: 10 bar - Delivery rate: 14.5 l/s - Drive: 400 V / 7.5 kW - Space requirement: approx. W 950 x H 1250 x D 850 mm - Weight: approx. 250 kg

Condition: used, Year of construction: 2016, functionality: unexamined, power: 4 kW (5.44 HP), type of cooling: air, Equipment: type plate available, Used Atlas Copco GA132VSD variable speed screw compressor. Synairgies reference: 21786. Year of manufacture: 2016. Maximum operating pressure indicated on the nameplate: 8.5 bar. One unit available in Montigny-en-Ostrevent. Photo of the machine and its nameplate attached. Sold as is. Price upon request. Dsdpfozlxxmex Apmecp

Condition: used, Year of construction: 2012, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: type plate available, KAESER TE 91 Refrigerant Dryer – Compressed Air Refrigerant Dryer – R134a – 16 bar Manufacturer: KAESER KOMPRESSOREN Type: TE 91 Year of manufacture: 2012 Serial number: 3160 Article number: 1.8008.50010 Capacity: 9100 l/min Dcodpjz Eqdrsfx Apmep Refrigerant: R134a Refrigerant charge: 1.950 kg Max. operating pressure of air system: 16 bar Supply voltage: 400 V / 3 phases / 50 Hz Rated current: 3.5 A Permissible ambient temperature: +3 °C to +43 °C

Condition: good (used), Kaeser 2000L Air receiver tank Dcodpfxerk Rm As Apmep 2000L air receiver tank, 11Bar, temp 50'C

Condition: good (used), Year of construction: 2014, machine/vehicle number: 1643870004, Offer 26288 Technical data: - Operating pressure: 10 bar - Delivery rate: 520 l/min - Drive: 400 V / 7.5 kW - Motor speed: 925 rpm - Air tank: 270 L - Separate refrigeration dryer BEKO - DRYPOINT, type DPRA 35 AC, year of manufacture 2013 - Space requirement: approx. W 1600 x H 1200 x D 600 mm - Space requirement for dryer: approx. W 350 x H 800 x D 450 mm - Weight: approx. 300 kg Dsdpfs Adptpex Apmocp

Condition: used, Atlas Copco GA 118 Rotary screw compressor Dsdpfjzz Rm Ujx Apmecp

Condition: used, ALMiG Gear 132 Compressor, Screw Compressor, 10 bar The screw compressors in the GEAR series are particularly suitable for very high compressed air requirements. The maintenance-friendly and service-oriented drive concept of the GEAR compressors includes a robust drive motor with high power reserves. The highly efficient gearbox operates with minimal slippage, high operational reliability, and an efficiency of over 98%, resulting in almost loss-free operation and thus protecting the drive. Furthermore, the highly efficient coolant separation enables a minimal residual oil content of only 2–3 mg/m³. The encapsulated design of the gearbox assembly makes these systems ideal for use under the harshest operating conditions. - Ideal for very high compressed air demands - Robust drive unit with high power reserves - Almost loss-free concept with an efficiency of > 98% - Maintenance-friendly and service-oriented drive concept Dcedpfettv Ibex Apmep ALMiG Gear 132 Year of manufacture: 2011 Final pressure: 10 bar Motor power: 132 kW Volume flow: 18.04 m³/min Length: 2800 mm Width: 1400 mm Height: 2025 mm Weight: 3830 kg Operating hours: 10,337 h Load hours: 9,378 h Downtime: 13,887 h Total delivery volume: 11,333,000 m³ You can find more ALMiG compressors – new and used – in our shop! International shipping costs available upon request!

Condition: used, ALMiG Direct 75 screw compressor The DIRECT 37-315 series is designed for extremely economical operation in every kW class thanks to its unique design concept, making it suitable for a wide range of applications. These fixed-speed compressors are particularly well suited as base-load compressors. - Separation system – highest compressed air quality through proven multi-stage separation - Air Control P – the compressor’s intelligence; it thinks, monitors, and documents. Thanks to the possible internet connection, there are practically no limits to communication. - Drive system – highly efficient, reliable direct drive - Compressors – powerful, excellent efficiency - Cooling unit – large-area coolers for the lowest compressed air outlet temperatures and optimal coolant temperatures - System fan – powerful, efficient, high-performance - Drive motor – robust drive motor designed for performance reserves ALMiG Direct 75 Year of manufacture: 2010 Final pressure: 11 bar Motor power: 75 kW Volume flow rate according to ISO 1217 (Appendix C-1996): 11.58 m³/min Dcjdpjttucgsfx Apmop Length: 2300 mm Width: 1400 mm Height: 1860 mm Weight: 1970 kg Operating hours: 7637 h Load hours: 6317 h Idle time: 167714 h Total delivery volume: 4,506,000 m³ You can find more ALMiG compressors – new and used – in our shop! International shipping costs are available upon request!

Condition: used, Year of construction: 2015, operating hours: 2,200 h, functionality: fully functional, overall weight: 105 kg, power: 3 kW (4.08 HP), pressure (max.): 10 bar, ambient temperature (max.): 40 °C, Equipment: documentation/manual, type plate available, Atlas Copco GX4P EP screw compressor Operating pressure – 10 bar Dcjdpfx Apj Afc Nmemep 2200 operating hours A suitable, used pressure vessel with a volume of 1000 liters is also available as an option.