Used crushing units for sale (122)

Condition: new, Klanke roll splitter for efficient shredding of reject rolls. Features: -Automatic safety lock -Blade protection -Emergency stop rip cord -Siemens SPS Technical data: Blade length: 1500mm Cutting channel opening: 1200mm Lhodpfx Ajn Hyxlshzob Motor power: 7,5kW Cutting force: 30to Ordered goods Price and further information on request. We will be happy to make you a non-binding offer.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2285x1420x1730 mm Lodpjvz Eyajfx Ahzohb Weight 1600 kg Total power requirement 22 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2765x2520x1730 mm Weight 3600 kg Ljdpfsvz Er Njx Ahzohb Total power requirement 55 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2285x1420x1730 mm Weight 1600 kg Lodpsvz Epzofx Ahzjhb Total power requirement 22 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2455x1970x1730 mm Weight 2600 kg Lhodsvz Ehkopfx Ahzob Total power requirement 30 kw

Condition: new, - Motor power 9kW - PLC-based control, two-hand safety circuit - Cutting force 35to - Splitting table straight design - Cutting channel: Ledpfx Ahstvm A Tjzehb - max. blade length L= 2000mm - max. opening H= 1200mm Bednmofn0d - Machine weight approx. 4 tons - Hand guard in the area of the control panel and opposite - Forklift entry shoes included (for easy transportation of the machine by forklift truck) Ordered goods Price and further information on request

Condition: new, - Motor power 9 kW - PLC-based control, two-hand safety switch - Cutting force 35 tons - Straight splitter table - Cutting channel: - Max. blade length L = 2000 mm - Max. opening H = 1200 mm - Machine weight approx. 4 tons - Color RAL 5012 - light blue - Hand guards near the control panel and opposite - Forklift access shoes included (for easy transport of the machine by forklift) Lhodpfx Aegl Ac Sohzjb Machine in stock, available immediately Price and further information upon request

Condition: used, Year of construction: 2006, total length: 6,500 mm, overall weight: 18,000 kg, rotor length: 1,700 mm, Crusher plant, twin-shaft shredder, slow-speed, drive: electro-hydraulic, 200 kW electric motor, hydraulic unit with control cabinet and operator panel. The plant has been out of operation for approx. 0.5 years. Two brand new rotor shaft bearings and labyrinth seals were installed on the drive side two years ago. Electrical and hydraulic systems are untested: must be connected. Lhsdpsx Nkdrefx Ahzeb

Condition: used, Year of construction: 2021, operating hours: 1,930 h, functionality: fully functional, PANIZZOLO PZH1500R – Twin-shaft Pre-shredder / Rotary Shear – Metal Shredder – 264 kW – 1,930 h Manufacturer: Panizzolo Recycling Systems Model: PZH1500R / PZ H 1500 R Machine Type: Twin-shaft shredder / Rotary shear / Pre-shredder Year: ____ Operating hours: 1,930 h Condition: Used Technical Specifications Cutting chamber: 1,500 × 1,400 mm Installed power: 264 kW (2 × 132 kW) Shaft speed: approx. 6–12 rpm Knives: Bolt-on (knives / cutters) Transmission: Heavy-duty industrial gearboxes Control: PLC / industrial automation system Weight: approx. 27,500 kg Applications / Materials Light scrap Steel sheets Drums / barrels Metal tanks Aluminum profiles Ideal for metal recycling, waste treatment center, shredding line, scrap metal recycling. Condition Fully functional machine Knives need replacing Regularly serviced Inspection and testing possible on site Lhedpfx Aox I Dc Eshzjb Sales conditions & pricing 🔧 Option 1 – Sold as-is (work required) Availability: immediate Price: €250,000 net ✅ Option 2 – Sold ready-to-use (fully serviced) Knives replaced General inspection and refurbishment Availability: lead time after order Price: €310,000 net

Condition: used, Year of construction: 2006, Plastic Cutting Mill – Sales Offer High-performance industrial cutting mill designed for shredding plastics and plastic films. Front feeding system combined with a hinged feed hopper ensures comfortable and safe operation. A heavy-duty rotor with a precision knife system and screen provides efficient and uniform cutting. Ideal for recycling and production lines. Technical specifications: Motor power: 35 kW Throughput: up to 600 kg/h Rotor diameter: 420 mm Rotor speed: 430 rpm Lodox Itymepfx Ahzohb Feed opening: 915 × 502 mm Max. input film width: 915 mm Rotary knives: 3 + 3 Fixed knives: 2 + 2 Screen hole diameter: 8 mm Drive system: 5 V-belts Material feeding: front feeding Feed hopper: hinged, manual tilt control Total machine weight: 1900 kg Robust design, high efficiency, ready for industrial operation.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, Panizzolo PZ 2H 1000 – Hydraulic Twin-Shaft Shredder | Ready for Operation Panizzolo PZ 2H 1000 hydraulic shredding unit offered for sale. Machine designed for heavy-duty metal and industrial waste processing. Technical specifications: Lhedpexlgrhofx Ahzob Twin cutting shafts, working length: 1000 mm Hydraulic drive system – high torque and stable performance under heavy load Cutting chamber approx. 1000 × 700 mm Replaceable alloy steel knives, suitable for metals and industrial waste Robust steel construction, designed for continuous operation in recycling plants Additional advantages: Machine in good technical condition Available immediately Possible inspection or video presentation Support with loading and export logistics (EU / non-EU) Machine located in Poland. Serious inquiries only.

Condition: used, Shredder, Erdwich M700/1-600, used machine Manufacturer: Erdwich Ledpex I Dmwefx Ahzehb Type: M700/1-600 Year: 2013 Power: 2 × 22 kW Overall dimensions: 1750 × 1820 × 1810 mm Weight: approx. 3,500 kg Hopper size: 650 × 580 mm × 2

Condition: excellent (used), For sale: Retsch BB300 Jaw Crusher (Manganese) The machine is fully operational and in EXCELLENT technical and visual condition – only occasionally used. Lhedpfxoxckcrs Ahzsb Application: Crushing of medium-hard, hard, and tough materials with hardness up to 10 on the Mohs scale. - Gap width (mm): 1-40 - Feed grain size (mm): < 150 - Final grain size (mm): 5-40 - Sample volume/capacity: up to 600 kg/h - Motor power (kW): 3.0 - Crushing jaws made of manganese steel

Condition: used, Year of construction: 2000, Granulator / Knife Mill Lsdpfx Aox Ext Tjhzjhb Manufacturer: Tria (Italy) Type: 80/45 Main motor: 55 kW Rotor length: 800 mm Rotor diameter: 490 mm + Blower + Big-bag station with cyclone

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: WKZ45-1030, CLEARANCE SALE, STOCK MACHINE! We invite you to visit our technical center to experience the quality and functionality for yourself. Material Shredder 45KW Hopper opening: 1,030 x 1,235 mm Rotor diameter: 360 mm Star-delta start, automatic shut-off during idle - Hydraulic pusher equipped with pressure plates - Siemens PLC control - Optionally with control cabinet extension for discharge conveyor belt and overband magnetic separator Complete solution with discharge conveyor belt in any configuration. Our core competence lies in delivering exactly what the customer truly needs. We work together with our customers to develop customized, individual solutions and supply corresponding systems from our own production. Please feel free to contact us by phone to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems Lhodpsv Tdq Iofx Ahzeb All prices are net prices plus 19% VAT All information provided without guarantee, while stocks last!

Condition: new, Year of construction: 2025, functionality: fully functional, rotor diameter: 360 mm, power: 45 kW (61.18 HP), Material shredder 45KW Hopper opening: 1,030 x 1,235mm Rotor diameter 360mm Star-delta start, automatic stop at idle speed - Hydraulic pusher equipped with pressure plates - Siemens SPS control system - Optional with control cabinet extension for discharge conveyor + overbelt magnetic separator Complete solution with discharge conveyor belt in any design. Our core competence lies in supplying the customer with exactly what he really needs. We work together with our customers to develop customized, individual solutions and supply corresponding systems from our own production. Please feel free to contact us by phone to find a suitable solution for your application. Lhodet Rivtepfx Ahzeb conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator, lifting magnets, filter bars, magnetic grid, magnetic grate, metal separator, block magnet, filter systems

Condition: used, Year of construction: 2009, Manufacturer: H&G Model: HG/SV 11 Ledpfx Asx Hyfyjhzshb Weight: 1800 kg Engine power: 11 kW

Condition: good (used), 📄 Technical Data: Kubria F/M 90/S Feature / Parameter Value / Information Application Area Secondary and tertiary crushing of hard rocks (e.g. granite, basalt, gneiss), ore, limestone, cement raw materials, etc. Crushing Concept Cone crusher: material is crushed by compression between a fixed crushing ring and a rotating crushing cone. Cone Diameter (bottom cone / mantle) 900 mm Maximum Feed Piece Size up to 150 mm edge length Closed Side Setting (CSS) 8 – 35 mm Feed Opening (max.) max. 180 mm (feed opening “f”) Final Product / Grain Sizes (depending on configuration) Lsdpjxzk Urjfx Ahzehb e.g. 0–16 mm, 0–22 mm, 0–32 mm Throughput Capacity (depending on configuration / material / setting) up to approx. 90 t/h (fine), up to approx. 110 t/h (medium), up to approx. 140 t/h (coarse / with larger screen or setting range) Main Dimensions (L × W × H) 1,960 mm × 1,550 mm × 2,460 mm Total Weight (without drive, electrics, hydraulics, control system) approximately 10 t Drive V-belt drive

Condition: as good as new (ex-display), Demonstrator with 7 operating hours Another machine available immediately (ex works in Neckartailfingen) MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Ledov Sqrpjpfx Ahzshb Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slide gate Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Included: - Raise the shredder by 30 cm (prepared for conveyor belt) Additional shredder options: - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €6,780 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: as good as new (ex-display), Year of construction: 2024, Special price: €29,970 net A machine is currently available immediately. The ideal machine for shredding voluminous, light aluminum chips or turnings. Not suitable for more solid aluminum parts. Includes: + Optimized cutting geometry + Adapted slide control + Load-dependent controlled hydraulic slide (which presses the chips against the cutting mechanism) Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blade: 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron PLC, Cutter opening 600 x 800 mm, Funnel volume approx. 0.6 qbm, Hydraulically operated slider Sieve perforation of your choice (15 - 40mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm The following options are available for an additional charge: - Raise the shredder by 30 cm (preparation for conveyor belt) +2,990 € net - Angle conveyor belt (discharge height approx. 220 cm) +9,770 € net - Overband magnet + €6,980 net Lhsdjgmh H Topfx Ahzob - Control of conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the chipper) We would be happy to carry out a free test with your material. We invite you to come to us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: new, Year of construction: 2024, Consisting of large bale breaker Type MHB and straw shredder Type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (lead time approx. 15 weeks) Suitable for round or square bales. Includes frequency converter (FU) – regulates the speed of the chain conveyor. The bales are placed on the chain conveyor, and the milling advance is activated. The milling tines tear the straw from the bale and hurl it into the hopper. Ideally, the combination of bale breaker and straw shredder is recommended here. Technical data – Bale Breaker: Performance: 1–2 bales per hour Up to max. 600 kg per hour (depending on screen size used in the straw mill and kW rating of the straw mill). Without straw mill, the bale breaker can process up to max. 900 kg/h straw. Max. square bale size: 2400 x 1200 x 800 mm (L x W x H) Milling motor: 5.5 kW, 380 Volt Chain conveyor feed: 0.75 kW, 380 Volt Dimensions: 3750 x 1730 x 2460 mm (L x W x H) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Surcharge for even larger straw shredder (18.5 kW): + €3,940 net Technical data, MHZ with special hopper: Motor: 15 kW, 380 Volt electric motor Diameter: 600 mm Hardened cutting knives Screen with interchangeable inserts; selectable perforations (10, 12, 15, 22, 30, 45 mm) With star-delta switch, phase protection, and 8 m power cable, plug-in ready Discharge nozzle: 160 mm Blowing distance approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H) Weight: approx. 240 kg --- Optional extras for a surcharge: Feed auger: + €970 net Cyclone (suspension by customer on site; should be no more than 10 m away): + €2,970 net Simple filter: €1,750 net --- Further options: Industrial extraction system (demonstrator): + from €9,950 net Optional rotary valve (renders material pressureless): + €5,750 net Control panel: from €1,620 net Special breaker extension 3 m (other sizes on request): + €9,750 net Briquetting press MPP 180 S; little used demonstrator 70 mm briquette – up to max. 100 kg/h from €39,700 net Lhjdpfxob Nulhe Ahzeb * Larger machines available on request --- Description: muetek bale breakers are designed for breaking up round and square bales of hay and straw. The shredder flanged to the bale breaker shreds straw from all types of cereals, hay, maize, and miscanthus. muetek machines of the MHZ / MHB series are characterized by robust construction and heavy-duty build quality. muetek MHB series bale breakers feature a chain conveyor onto which the straw bale can be placed using a front loader. The support surface is adjustable depending on bale type. The chain conveyor pushes the bale against the milling rotor. The feed speed is adjustable. The milling rotor is equipped with several teeth that tear open the straw bale. The separated straw is discharged. --- The machines are generally suitable for dry input material: - Straw - Hay --- Breaking up hemp bales is possible only with a special breaker (surcharge approx. €9,720 net, depending on configuration). Straw mill is not suitable for hemp processing. Requirements for input material: Max. moisture content 12%

Condition: as good as new (ex-display), Year of construction: 2023, Ideal for shredding polystyrene or similar materials Throughput depends heavily on the sieve and source material: - up to 60 kg / h for EPS with a 15 mm sieve *the coarser the sieve, the higher the throughput Motor 9.2 / 11 KW - 400 volts, stable steel construction, hardened cutting blades, sieve with interchangeable inserts, optionally (8), (10), 15, 22, 26, 30, 40, or 60 mm perforation with electric drive with star-delta switch Ue protection and 8 m supply line ready to plug in, blow-out nozzle 150 mm, optionally for plastic or grain pipes, blow width approx. 12 m, chassis with 2 running wheels Ø 380 mm, and a swiveling support wheel Ø 125 mm, all Wheels with solid rubber tires, Dimensions approx. 1200 x 900 x 1270/1400 mm lxwxh Lhsdpoh S H T Usfx Ahzsb Weight approx. 240 KG, Spare parts prices and options: 24 blades, hardened €9.90 each net 6 bolts €14.90 each net 1 sieve €475 each net Lid €290 each net

Condition: as good as new (ex-display), Year of construction: 2025, showroom machine machine available Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Lsdedv Eu Hjpfx Ahzohb Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: new, Year of construction: 2026, Single-shaft shredder MRZ 530 Included: + Profile rotor for increased throughput Lodpfxsd Db N Is Ahzohb Options: Double knife row + €895 net Veneer and paper stripper + €970 net * recommended for extremely thin materials with a thickness less than 3 mm Our mütek single-shaft shredder MRZ 530 processes a wide variety of materials such as all types of wood residues, softwood, chipboard and MDF, pallets, construction timber, demolition wood, carpets, cables, paper, cardboard, and plastics. The machine is characterized by its robust design, ensuring consistent quality in continuous operation. We are pleased to offer you a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight and we will document the test with pictures and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 phase Knives: multiple reversible Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Hopper (mm): 510 x 810 mm Hopper volume approx. 0.4 m³ Throughput: 1 - 5 hopper fillings/hour Hydraulically operated pusher Screen perforation as desired (10 - 40 mm) Extraction nozzle Ø 160 mm Weight approx. 1,000 kg Dimensions approx. 1550 x 1100 x 1640 mm Moisture content of raw material: must be below 30% a.d. Standard features included: • Fast hydraulics • Profile rotor • Control cabinet with Siemens PLC control • Automatic star-delta start • Automatic shut-off in case of rotor idle • Removable extraction channel • Speed 70 - 100 rpm for higher throughput • Cycle control to prevent idle time • Performance-enhancing step control for hydraulic pusher • Stable guides for hydraulic pusher Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm ± 100 mm - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (start and stop synchronized with the shredder) Requirements for input/raw material: - Moisture content (a.d.) must be below 30% - Metals and mineral impurities such as sand, stones, etc., lead to increased wear

Condition: new, Year of construction: 2026, Delivery time approx. 3-4 months MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slider Screen perforation of your choice (10 - 40 mm) Suction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Additional shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) + €2,140 net - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Lhjdpfod Dgw Ujx Ahzeb Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €5,980 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - Moisture content (dry) must be below 30% - Installation temperature: temperature-controlled room at least +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear