Used die cutter for sale (96)

Year of construction: 2005, condition: used, Kama TS 105 diecutting and embossing machine Year: 2005 Equipped with: Mabeg feeder Sheet alignment Codpfx Aaeyu S Nfoaogr Diecutting section Kama HFS hotfoil unit Delivery Siemens Simatic OP7 digital control panel Mechanical speed max: 4.500 cycles/h Cutting force max: 1.9 MN Max sheet size: 740 x 1.050 mm Min sheet size: 330 x 480 mm Carton thickness: 130 - 1.500 g/m² micro-corrugated cardboard thickness: 1.8 mm Gripper edge min.: 10 mm Stack height (feeder): 1.150 mm Stack height (delivery): 880 mm Only 6,3 million lifting strokes

Condition: good (used), Offer consisting of: Original Heidelberg Cylinder, 57x77 cm, year of manufacture 1966, fully functional, inspection possible, video on request. Cgjdpfx Asyy Rw Hjaaor

Year of construction: 2005, condition: like new (used), functionality: fully functional, machine/vehicle number: 053801204, Machine is meticulously maintained Cgjdpfx Aajyrnhxjaor Has been operating in a greeting cards factory Comes with centre line system 2 x die cut chases 1 x embossing honeycomb if required Can be demonstrated on location, London Area, UK Available immediately

Condition: good (used), Year of construction: 2012, operating hours: 21,200 h, functionality: fully functional, Non-stop sheet feeder with pre-stacking device Non-stop delivery with roll cloth Raised by 30 cm, including platform elevation Three-phase auto transformer Hold-down device for thin or wavy material Die plate fine adjustment system Small sheet device (min. sheet size 300 x 350 mm) Mechanical double sheet detector Side lay markers on operator and drive side Strip insertion unit in the delivery section Standard blanking frame Quick-lock closing frame with fixed make-ready plate Blanking station Touch-screen control Centerline system Cgedjyxr D Eepfx Aaasr Without compressor

Condition: used, Meyer Press Type AHV-CPL 8050 Cedebq A A Nopfx Aaajgr Machine number: 697102

Year of construction: 1991, condition: used, Standard equipment Cgjdpfxobnggzs Aaaor

Year of construction: 2016, condition: excellent (used), functionality: fully functional, machine/vehicle number: 116245, GM DC330 Digital die cutting machine/ converter Compact footprint Unwind Web guide Web width 330 In / Outfeed nip for tension control Magnetic die station 200z / 25inch to support die plates of 50mm to 520mm Distortion/ Dispro factor to handle other tooth size plates Re Reg mark reader to support the printed web Die-cut offset possible inline Csdpfx Aaoylpvdoaegr Lateral/ Cross movement possible Waste rewinder Slitting station with manual 7 air pressured V-knives Upper and Lower rewind with options of clock or anti clockwise rotation Label or meter counting Core mandrels/spindles of 25mm, 38mm, 44mm and 76mm x 2 Cold foil Self adhesive lamination Laminator unwind and rewind Silencer to reduce noise when using the lamination Full Flexo station Varnish tray, Picking roller, Anilox roller, Print roller included GEW UV lamp Min 6 bar air pressure required Machine Weight 1200Kg

Year of construction: 2001, condition: used, machine/vehicle number: 15026, Format: 720 x 1040 mm The machine is a foil hot stamping machine, e.g., for holograms. It consists of a feeder, printing unit, and delivery unit (see photos). A total of 70 machines were built. The machine is currently fully functional with the new control system. Cgodewabbvjpfx Aaaer The estimated cost to bring it into operation is approximately €150,000-200,000 (dismantling, transport, assembly, commissioning, training, documentation for the new control system).

Year of construction: 2020, operating hours: 1,000 h, condition: used, functionality: fully functional, KAMA ProCut 76 Foil – Die-Cutting and Hot Foil Stamping Machine Model Year 2020 | High-End Configuration | Industrial Quality “Made in Germany” For sale is a KAMA ProCut 76 Foil from the 2020 model year. This machine is engineered for demanding die-cutting, embossing, and hot foil applications, making it ideal for carton, packaging, and finishing companies with high quality requirements. Features & Highlights • High-performance die-cutting machine for paper, board, and plastics • Integrated hot foil stamping system for premium finishing • Very high production output with excellent precision • Robust, durable machine design • Servo-controlled feeder and transport table with electronic double-sheet control • High degree of automation and reproducible quality • CE-compliant, Made in Germany Standard Equipment • Motorized platen pressure adjustment (MPC) • 4+1 system with base plate and 1 set of 1-mm counter plates  – 5× medium, 1× hard • 1 standard chase with fine adjustment for steel rule tools (full format) • 3 pile trolleys for feeder and delivery (plus 4 additional pile trolleys) • Servo-driven feeder and transport table • Electronic double-sheet control • 1 set of KAMA fastening elements • 1 set of mounting elements for 15° dies on KAMA carrier plate • Industry 4.0-ready for remote maintenance and network integration Special Equipment & Options • Integrated hot foil stamping  – Mobile frame with integrated heating system Cgsdpfx Aaeyc Hmusaer  – 4 or 6 heating zones  – Two foil draw motors  – Powered rewind shaft  – Two tool carrier plates  – Foil-Saver software for foil optimization • KAMA AutoRegister  – Maximum registration accuracy  – Especially suited for digitally printed sheets • Pneumatic tool clamping (76 only) • Die-cutting force display with overload protection • Universal chase • Chase rack • Vacuum pump and compressor • Servo main drive for asynchronous drive cycle  – Up to 50% higher machine speed  – Alternatively, extended contact time for hot foil stamping Technical Data (excerpt) • Machine type: KAMA ProCut 76 Foil • Model year: 2020 • Maximum sheet size: 760 × 600 mm • Minimum sheet size: 279 × 210 mm • Maximum die-cut size: 743 × 585 mm • Material range:  – Paper from 100 gsm  – Board up to 1,500 gsm (approx. 1.8 mm)  – Plastics such as PET, PP, PVC • Production speed: up to 5,500 sheets/h • Die-cutting force: 165 tons (1.65 MN) • Gripper margin: 10 mm • Machine dimensions (L × W): 4.87 × 2.69 m Applications • Die-cutting of folding cartons and packaging • Hot foil stamping for premium enhancements • Carton, paper, and plastic applications • Post-press finishing of digitally printed sheets with highest register requirements • Short and medium runs with maximum precision Conclusion The KAMA ProCut 76 Foil is a highly flexible, high-performance die-cutting and hot foil stamping machine for professional users. With comprehensive standard and special equipment, state-of-the-art servo technology, and Industry 4.0 readiness, it offers an outstanding overall package for demanding production environments.

Year of construction: 1956, condition: used, Format 540×720 mm (21×28″) Cedpeyr H Htefx Aaaogr Punching cylinder Available at short notice

Condition: good (used), machine/vehicle number: 2004, Renz HB 2000 Binding machine for plastic effect binding; Spiral; Wire O Cgsdpjbq Sykjfx Aaasr

Year of construction: 1987, condition: good (used), 1 used die-cutting and embossing platen with additional automatic feeder Rabolini Imperia Gold, year of manufacture 1987 Cgedpfeyttuajx Aaaor

Year of construction: 2021, condition: good (used), Die Cutting and Embossing Machine Manufacturer: Heidelberg Model: Promatrix 106 CS Year of manufacture: 2021 Minimum sheet size: 300 x 350 mm Maximum sheet size: 760 x 1,060 mm Maximum machine speed: 8,000 sheets/h Maximum die cutting pressure: 2.6 MN / 260 t Materials and pile height (including pallet) Cgodjvxu Smspfx Aaasr Paper min.: 90 g/m² Cardboard / solid board max.: 2,000 g/m² Corrugated board max.: 4.0 mm Feeder pile height: without Non-Stop max.: 1,500 mm in Non-Stop operation max.: 1,200 mm Maximum feeder pile weight: 1,500 kg Without blank separation station Without MasterSet 18326ä

Year of construction: 2020, condition: excellent (used), This machine is available for the German market only. Csdpfx Aajg U Amzjaegr

Condition: ready for operation (used), functionality: fully functional, Graphic Whizard numbering, perforating and creasing machine with many accessories. Immediately available Cgedpfxjvcxwne Aaasr

Year of construction: 2022, condition: as good as new (ex-display), Large format cutting plotter DG1513 Cutting format 150 x 130 cm Cedpfx Aajnfvwveasgr synchronized vacuum belt system Unwinder for large format roll goods Tangential knife Oscillating knife Creasing tool Incl. vacuum generator Control console control, incl. software

Condition: good (used), ML-800 NXL Die-Cutting Machine Codsyxrzdjpfx Aaajgr This machine is used to cut shapes from a mold (die) from materials such as paper, cardboard, leather, plastics, etc. The machine is in perfect condition, manufactured in 2018. First installed in 2020. This is the heaviest die-cutting machine in this format, precise. Format: 830 x 560 mm Weight: 2500 kg Power supply: 380 V Motor: 2.5 kW Equipment: – Electromagnetic clutch and brake – Quick-mount frame – 3 operating modes: continuous, time-delayed, and manual – Centralized pressure lubrication – Additional safety guards – Operating tools and instructions with CE documentation.

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication Cgedeyxry Hspfx Aaajr – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: used, Year of manufacture: N/A Condition: excellent Technical specifications: - maximum format -1500 × 1050 mm - maximum speed 14 cycles/min - electromagnetic clutch - self-centering frame for quick clamping of the die - automatic centralized lubrication Device description: ML 1500 is a robust punching and notch press with working area 1500 × 1050 mm, intended for precise punching and creasing operations. The machine construction ensures high stability, long service life and reliable operation even in demanding production environments. Key features: - Standard operating speed of approximately 14 cycles per minute - Powerful motor in the range of 5.5 – 11 kW (depending on configuration) - High machine weight and rigid frame for accurate cutting results - Suitable for continuous industrial operation - Typical applications: The machine is primarily intended for the printing, packaging, and converting industries, including: - Production of cardboard boxes and packaging, - Die cutting of paper, carton, and similar materials, - Creasing and preparation of folding lines, - Both short-run and high-volume production. Cgjdpfx Aoyk Eg Aeaasr

Condition: good (used), Ram punch AMC Hydromatic 220 Label die cutter A professional machine made in Italy. AMC is a world leader in the production of label die-cutting machines. Very good condition. The machine is 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 220 x 220 mm Number of cycles: 18/min Productivity: 900,000 sheets/h Codpfx Aasywdt Asasgr Weight: 700 kg The machine is equipped with a hydraulic quick-action unit. Photo safety barriers. Adjustable feed table in all directions. Two operating modes: semi-automatic and manual. Tail on the delivery.

Condition: good (used), Original Heidelberg GT 34×46 Automatic Die Cutter This machine can cut, creas, perforate, and even print (optional). Excellent condition, recently serviced. 100% original, no modifications. Cgjdpfxjywdr Sj Aaaor Machine format: 34x46cm Pressure: 60t Weight: 600gsm Working speed: 4000 sheets/h Weight: 2300kg Fully complete, includes frame and spare parts, but no print rollers. A very rare machine on the market.

Condition: good (used), Simplacutter model IV 110×160 Cauhe die cutter The machine is fully operational, like new. Made in Spain. Cgjdpfx Aajywdr Esaor Frame size: 1100×1600 mm Sheet size: 1160×1680 mm Weight: 8500 kg Power supply: 380 V Installed power: 7.5 kW Impact force: 350 t Equipment: – pneumatic clutch and brake – control panel – two frames – 2 operating modes: time-delayed, manual – central lubrication – additional safety guards – safety pressure mats – operating tools – hard sheet metal

Year of construction: 1975, condition: good (used), functionality: fully functional, Heidelberg Cylinder SBG 57x77cm ref 2977 Max sheet size: 56 x 77 cm Automatic feeder Good working condition. Codpfx Asyyaxmoaaegr Available immediately.

Condition: good (used), Ram Punch Gerhard Busch CL Label die cutter Professional machine made in Germany. Very good condition, ready to operate. Bush is a leader in the production of labeling machines and pushers. 100% functional, with no signs of wear. Technical specifications: Max. format: 330x380mm Min. format: 130x180mm Cedpfsyur Disx Aaaegr Cycles: 8/min Stroke length: 180mm Capacity: 400,000 sheets/h Installed power: 15kW Weight: 2600 kg The machine is equipped with a quick-action hydraulic unit. Safety guards, photocells activating automatic operation, and quick-adjustable die-cutting clamps with a crank. Angle adjustment of the entire head, piston stroke adjustment, and table adjustment. Feeder table adjustable in all planes. Two operating modes: automatic and manual. Tail on the delivery. Tool kit, conveyor belt for removing waste to the container. Made in Germany.

Condition: excellent (used), Year of construction: 2001, Ref: 10900 . 2001 Bobst SP102-BMA Foilmaster Excellent condition! Only 33,000 hours worked! Equipped with: Fully Automatic Feeder Cgjdpfx Aasu Snwmeaor Double Sheet Control Centre Line Hot Foil Unit 2 x honeycomb chase 2 x die cutting chase 16 Independent Heating Zones Foil Advance Shafts Automatic Delivery Elevated (High Pile) Specification: Sheet Format Max: 720mm x 1020mm Sheet Format Min: 350mm x 400 mm Working Material Paper/Solid Board: 80-2000gr Corrugated Board: "E" and "B" - max. 4mm Gripper margin: 9-15mm Stamping Format: Max 680mm x 1010mm Max speed: 7,500 p/h