Used Extruders & extrusion lines for sale (229)

Condition: used, Year of construction: 1994, Film width: 1500 mm Thickness range: 25-200 Dosing system: Summit Garvimetric Screw: 90 mm Heating zones: 5 Heating power: 64 kWt approx. Driving system: D.C.11-110 KW Power: 415 Die head: fixed Diameter die head: 350mm Diameter of the gap: 1.25 to 2.25 IBC – yes Air ring type: optifil Die lip gap diameter: 2-50 Calibrating basket: yes with Ultrasonic control Motorized adjusting of calibrating basket in diameter / high: yes Take-off system: Oscillating Number of rolls: 2 Web guiding system: Yes Final roll width: 1650 mm Final roll diameter: 1000 mm Cgo Ia Sowgcw Sjtpyst Final roll maximum weight: 1 t Rewinder speed: 100 Thickness Control System: Optifil Micro perforator: no Filter changer: Yes(hydraulic) Electrical requirements: 400 A PLC: Siemens Simatic S5-100 U Trim removal system: Rollers Yes-Extract No

Year of construction: 1980, Condition: reconditioned (used), machine/vehicle number: 2489, stock-No.:2489 1 used, functionally tested Single-Screw-Extruder, ready for trial-run: Manufacturer: KUHNE Germany Type: ES 60-24 Screw- Ø 60 mm – 24 LD Main-feed zone can be chilled( cooling unit not included ) Screw speed up to 100 r.p.m. Extruder Motor: 25,5 kW – 63 A – DC 4x Heating zones with air-cooling 3x additional heating zones for down-stream equipment as: die-head, tools, screen-pack-changer, etc. control board Cs Iasd Sg Hcs Stpyjgt Relating down-stream-equipment as screen-pack-changer, pelletizing etc. against additional price, details upon request. More extruders ex stock available, visit us or ask for our most recent Machine-Stock-List. You´re welcome.

Condition: good (used), Functionality: fully functional, Twin-screw extruder / laboratory extruder - 2 x 30 mm screw diameters - 3 heating zones + 1 tool heating zone - Degassing available - Control system - Dosing system - Strand die Cge Ia Stpju Hiigjyjt Optionally available with water bath and strand pelletizer

Condition: used, We offer directly on behalf of the owner : Twin-screw extruder Make : COPERION ( Werner & Pfleiderer ) Gearbox make : P.I.V Type : ZSK 170 W 1920/1750 Year of construction : 2021 / 2002 / 1986 Screw diameter : 172 mm Screw speed : 4,9 - 49 min-1 Max. torque : 17,500 Nm Main engine : 216 kW In the last 3 years, a total of over €420,000 has been invested in new components and factory overhauls (some of which were previously unused) The extruder was in use until Aug / 2023 and has already been dismantled ready for transport. Cge Ia Stpjwdilweyet The components are partly redundant and date from the years 1986 - 2021. The scope of delivery consists of : Twin screw degassing Coperion DSE 180 - 1 x year of manufacture 2021 ( 180 t€ ) Main gearbox P.I.V - 1 x year of manufacture 2002, factory overhauled ( 233 t€ ) in 2021, unused - 1 x year of manufacture 1986, factory overhauled in 2016, used 2021 - 2023 Main engines Siemens, 212kW, 460V - 1 x 2002, factory overhauled ( 8 t€ ) in 2020, unused - 1 x year of manufacture 1986, factory overhauled in 2015, used 2020 - 2023 Barrels - 16 various, new + used, with + without openings Screw shafts - 2 x approx. 4,600 mm Miscellaneous : - Supports - screw tips Sold without electrical and control devices and without screw segments. Further technical data and details on request or see data sheets in photos / PDF

Condition: like new (used), Year of construction: 2024, operating hours: 20 h, Functionality: fully functional, total length: 3,400 mm, total height: 1,750 mm, total width: 1,200 mm, type of input current: three-phase, input voltage: 400 V, Haul-off or automatic belt tractor for extrusion line or other model year 2024. New equipment for sale following modification of our client's project. Technical data: Cgo Ia Stpjwbgw Seyet Tractive force: 10,000 N Machine dimensions: L3400 mm x W1200 mm x H1750 mm Profile or tube thickness: min. 16 mm, max. 110 mm Ground-to-chain height: 1000 mm Max. speed: 3 m/min Power: 3 kW 400 V CE-certified equipment Air pressure: 0.4 to 0.7 MPa

Year of construction: 2006, Condition: good (used), Tool connection suitable for WEBER DS 9.-- Flow channel hard chrome plated 2 x 1/2" x20 UNF bore for melt pressure and melt temperature Ce Ia Stolp Rd Hspyjgt

Year of construction: 1988, Condition: excellent (used), Extrudeuse double vis de laboratoire Werner & Pfleiderer ZSK W54 Cs Iaertbd Uo Stpysgt Caractéristiques : Diamètre de vis = 57,8mm

Year of construction: 2004, Condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x addituional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available Cgs Ia Sjiyx Uzjtpyet

Year of construction: 2006, Condition: refurbished (used), Functionality: fully functional, Starlinger Extruder - Screw diameter: 65 mm - Refurbished - Degassing zones - Filter / screen changer - Strand die Data sheet, see photos. Optionally with water bath & strand pelletizer, etc. We are available for any further questions. Commissioning and testing available upon request. In stock Ce Iehgq Ahsa Stpyegt

Year of construction: 2003, Condition: good (used), Functionality: fully functional, screw diameter: 27 mm, TECHNICAL DETAILS Capacity: 10 – 40 kg/h Screw and Barrel Technology Design: Synchronous Screw center distance: 23 mm Screw diameter: 2 × Ø27.0 mm Kneading disc and kneading block diameter: 27.0 mm Screw material: 1.2379 Cylinder diameter: 27.2 H8 Cylinder material: 1.8550 nitrided, nitriding layer 0.5–0.6 mm Screw length: 40 D Screw torque: 2 × 100 Nm Ce Iaev U Da Sj Stpyegt Screw speed: max. 500 rpm Drive Drive type: DC shunt motor Drive power: 10.5 kW Motor speed: max. 2,690 rpm Gear ratio: i = 5.38 Power transmission: Clutch Heating and cooling system Number of heating zones: 11 Heating capacity: 9.85 kW Number of cooling zones: 9 Cooling type: ZIK (Intensive Cylinder Cooling) Filling zone cooling: Water Filling zone cooling water consumption: 30 l/h Process parameters Melt pressure: max. 300 bar Melt temperature: max. 350 °C Injection height: 1,050 mm Dimensions and weight Weight: approx. 950 kg Length: 2,630 mm EQUIPMENT - Segmented screws and barrels - Synchronized technology - Degassing

Year of construction: 2016, Condition: excellent (used), Functionality: fully functional, Make: Reifenhauser Model: Mirex-MT-V 1-RZE 120-1800 Year: 2016 Condition: Excellent Use: PET / PP / PS Foil or Sheet PET: Thickness Range: 0.25 - 2.2mm Output: 2,000 kg/h Max Sheet Width: 1600mm Extruder: RZE 120mm Cs Isvbcbuoa Stpysgt Electrical Supply: 3 x 480V 60Hz with N Calendar Roll Width: 1800mm Calendar Roll Diameters: 450 / 700 / 700mm Silicon Bath Max Sheet Width: 1600mm Silicon Bath Sheet Thickness Range: 0.15 - 1.5mm 4 Position Winder WOB 1800 for double web winding included. All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Year of construction: 1992, Condition: excellent (used), Battenfeld gearboxes for single screw extruders : BEX 1- 90-30B , Co Ia Stohbyxujpysgt i = 6,6 , 160 kW,

Year of construction: 2008, Condition: refurbished (used), Functionality: fully functional, Twin parallel screw extruder - Manufacturer: WEBER - Type: DS 8.22 - Year: 2008 - Double parallel screws ø87mm 22D - 5 heating zones on the cylinder + 2 cooling zones - 5 tool heating zones - Engine power: 56kW Cj Ia Stpswc Dhdoyogt - Up to 200kg/h profile - 300kg/h tubes Very good condition

Year of construction: 2015, Condition: as good as new (ex-display), machine/vehicle number: 2245, stock-No.:2245 1 used Lab Extrusion-pelletizing Batch line, condition like new, equipped with: Cj Iaod Sg Hro Stpyegt Extruder single-screw AlphaTec type AE-S 25-30 single-screw Ø 25 mm – 30 L/D Extruder motor 3 kW- AC, screw speed range up to 130 rpm frequency controlled cylinder air cooled, elec. heating 2 x 3 kW 1x venting athm. port 1x manual screen-pack-changer Ø 42 mm 1x strand-die-head 1x water bath 1.000 x 150 mm 1x strand-pelletizer, intake width 30 mm, motor 1,1 kW – AC control board with PID, melt pressure, speed by frequency converter Trial-run shortly possible, date by appointment Mire extruders ex our machine-stock Wuppertal Germany available.

Year of construction: 2022, Condition: new, Functionality: fully functional, - Grinder for e.g. lumps - New / unused machine - Open rotor - Grinder 650 mm x 550 mm - Control unit Cgs Iajp E Anvo Stpyjt Spare parts can be supplied. (sieve, knife etc.)

Year of construction: 2015, operating hours: 3,500 h, Condition: ready for operation (used), Functionality: fully functional, controller manufacturer: Siemens, TECHNICAL DETAILS Cs Ia Sjv Uqf Ietpyegt Processable materials: PE, PP, PS, ABS + fillers Capacity: 50 – 200 kg/h Screws and barrels Screw diameter: 2 × Ø 33.0 mm Length-to-diameter ratio (L/D): 54:1 Screw speed: max. 1,200 rpm Max. continuous operating temperature: 350 °C MACHINE DETAILS Motor power: 64.0 kW EQUIPMENT - Co-rotating screw conveyor - 2 × atmospheric degassing - 2 × side feeders - Segmented screws and barrels

Year of construction: 2015, Condition: excellent (used), Functionality: fully functional, Make: Viscotec Model: DeCON20 Year: 2015 Condition: Excellent Use: Dryer / Decontamination Unit Cgj Iasrdgygj Stpyot Main data: Max. output with flakes [500kg/h]* Net volume of reactor [2.6 m3] Installed power [125 kVA]* Energy consumption [0.10-0.15 kWh/kg]* Max. surface moisture of input material [1%] Output humidity [

Condition: used, Twin screw extruder 34mm diameter Cj Ia Stev U Nnuopyogt 400 volts, 128 amps 2 pairs of spare screws Used for powder coatings Hourly output 250-400 kg depending on the product

Year of construction: 2006, Condition: ready for operation (used), Additional Equipment Machine includes an SA 500 extractor built in 2006 and a 6m long cooling section. Cge Iaev Sfw Ho Stpyjt This KUHNE KS45-24D compounding extruder was manufactured in 2006. Ideal for processing a variety of materials, it offers robust construction and reliable performance. Consider the opportunity to buy this KUHNE KS45-24D compounding extruder. Contact us for more information. Application Types Extrusion

Condition: reconditioned (used), No.: 2587k 1 used, functionally tested pelletizing-extrusion line, output approx. up to 600 kg/h depending materials, equipped with: 1 volumetric material blender ( Dosing unit ) Extruder Plastmachines Type PME 100 Single-screw Ø 100 mm – 35 L/D Motor 134 kW – DC 1x venting port Melt-Filter BKG Type K-SWE 121 RS – back-flush self-cleaning incl. Hydraulic pack 3 kW Strand die-head with holes 20 x Ø 3,5 mm Strand cooling bath 00 x 4000 mm incl. strand guiding rollers Strand blower Strand pelletizer SG 3000 ResoTec Control cabinet Inspection visit shortly possible, date by appointment. More extrusion lines ex our Workshop / stock Wuppertal - Germany available. Cs Iasgbdrqe Stpyjgt

Year of construction: 2025, Condition: new, machine/vehicle number: 30632, IDE-o/c 12002675 SINGLE SCREW CO-EXTRUDER MEB 30/5x25D (picture similar, here shown MEB H20/5x25D) - NEW machine from IDE-stock program - international size 1-30-25 - mobile on 4 swivel castors - manual height adjustment mm via threaded spindle - control cabinet integrated in the frame * incl. connection cable 5m long, 32 A CEE - control via PLC Control 20/4 with 7" touch panel * drive on/off * display screw speed * display motor load * heating on/off/lowering value * set value either via touch display or digital potentiometer - emergency stop button on the control cabinet - AC parallel shaft helical geared motor 5.2 kW air-cooled, in Z-design - screw speed max. 88 rpm - screw back pressure max. 300 bar (temporarily 350 bar) - one-piece cylinder (nitrided) with water-cooled feed zone - 3 cylinder heating zones with 3 cooling fans - material hopper, 6 liter volume, fix mounted on barrel - die connection M22x1,5 screw Ø 30 mm x 25 D - Screw for processing PVC-F - screw design acc. to drawing 1258060 - output range 1.5 to 8.0 kg/h, depending on tool back pressure - nitrided and polished, with integrated screw tip - screw take-out to the front (in extrusion direction) 4 additional heating zones Cge Ia Sou Tgristpyjt - display in extruder control - sockets CEE 230V, temperature probe FeCuNi Typ L - 1 additional heating zone with heater band for union nut - 1 additional heating zone for heating hose (without heating hose) - 2 die heating zones, without heating element (as spare) melt pressure and temperature measurement - combination probe ½"-20UNF-2B, cable pluggable - pre-warning 250 bar / shutdown 300 bar - visualization in ME Control 20/4 extruder control

Year of construction: 1996, Condition: reconditioned (used), No.: 2590k 1 used compounding-pelletizing line – output up to 1200 kg/h depending material, equipped with: 1x gravimetric ( loss-in-weight ) blending unit 5-Components SITECOM incl. control board 1x Extruder Twin-screw THEYSOHN Type TSK 90 Screws 2x Ø 90 mm – 36 LD co-rotating intermeshing Segmented screws-and Cylinder, Water / Medium cooled Extruder Motor 255 kW-DC / Screw speed up to 300 r.p.m. 1x Side feeding extruder TSD 75 twin-screw with 3 kW 3x venting ports 1x Melt-Filter Type K –HS- Y 176 mm incl. Hydraulic Pack 1x Melt-Pump with motor 22 kW 1x Strand die-head with holes 32 x Ø3,5 mm 1x Strand cooling bath 620 x 5000 mm 1x Strand pelletizer SG 300 with 11 kW ResoTec Monitor control Board Inspection visit / demonstration shortly possible - date on appointment You´re welcome. Cgs Ieh Eyd Aoa Stpyst More compounding pelletizing lines ex pour workshop available, find our most-recent stock-list online on our homepage.

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome Cj Ia Sjiyyndetpyogt

Year of construction: 2003, Condition: refurbished (used), Stock-No. 2086 twin-screw compounding extruder BERSTORFF type ZE 60 A - UT screw size 2 x 64 mm - 32 LD Capacity 800 kg/h depening material specifications Drive from 197 kW up to 350 kW possible , optional by appoinment L/D 34 - 40 LD , by appointment > due to your material formula needs drive up to 230 kW - 350 kw optional against add.price 1x venting port new control board optional - equipment against additional price: screen-pack-changer pelletizing material feeding , loss-in-weight gravimetrci blenders pellet-classifier and more Cs Iasc Rukwe Stpyjgt Please inform which equipment you need for a detailled quotation, thank you. All ex stock available

Year of construction: 2023, Condition: new, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Ce Ia Soi Dtbistpyegt Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant.