Used heating & cooling units for sale (160)

Condition: new, *Technical standard specification: Unit type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C flow temperature and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of at least 2 bar) Medium: water up to 150°C Maximum external volume: 9 ltr at 150°C *Functional equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring by magnetic float switch - Dirt filter in return flow of circulation and cooling water inflow - Reversing circuit for leakage stop operation (usable up to system closing temp.) - Ball valve in flow & return - Automatic temperature-dependent system closure - Filling time monitoring and aquatimer - Adjustable pump overrun - Adjustable temperature alarm - Options: Interface cable - Regulation and control unit SBCmini, with relay for common alarm, 230V, on rear of controller on terminal block - Heating control SSR - Control box IP54 - Interface 20mA TTY; pin assignment Arburg - Cekon plug 16A - Corrosion-resistant components (VA,MS) - Unit mounted on castors, two of them steerable with brake - Additional temperature fuse for safe shutdown of the heating on heating contactor - Bypass between flow and return with reduced cross-section *Pump: Guedjfnvwqjpfx Anlec Type: Y2051 Delivery rate (max) 27 ltr/min Delivery pressure (max) 4.5 bar Motor power 0.5 kW Type of submersible pump / peripheral impeller *Dimensions/Weights/Colours Dimensions L/W/H: 600 mm x 240 mm x 493 mm (without connection) Weight: approx. 43 kg Colour: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulation medium socket G1/2" cooling water socket G3/8" *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW medium: oil up to 350°C Maximum external volume: 66 ltr at 350°C max. flow rate: up to 150 l/min  max. delivery pressure: up to 8,0 bar Motor power: 2.8 or 4 kW Dimensions LxWxH: 1,414 x 503 x 1,350 mm (without connections for continuous bypass) Weight approx. 225-320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Regulation and control unit Smart Controller (7" Touch-Displ) -Heating control via solid-state relay -Control box IP54 -Cooling controlled via solenoid valve -Flow measurement using the differential pressure principle -Bypass between flow and return with reduced cross-section -Level monitoring by means of magnetic float switch -flow monitoring by recording the heating rod surface temperature and the flow rate -dirt filter in the cooling water supply and in the return of the circulation system -monitoring of the flow temperature by electronic safety temperature limiter -external oil filler neck -Dilo fittings on internal piping connections (except pump connections) -at 350°C: continuous bypass, including bellows valves -Connection for nitrogen blanketing with pressure gauge and safety valve 0.5 bar at 350°C (option) Gsdpsg Ey Rfofx Anlsuc Visit our website for more details or for other performance classes. *Unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be stated in quotations or order confirmations.

Condition: new, *Technical standard specification: Heating capacity: 9 kW Cooling capacity: 50 kW medium: water up to 160°C Max. external volume: 16 ltr at 160°C max. Flow rate 57l/min  max. Delivery pressure 6,0 bar Dimension L x W x H 780 x 305 x 705 mm Weight approx. 80 kg HIGHLIGHTS EQUIPMENT: - Smart Controller Plus 7" touch / 4.0 capable - Flow measurement, adjustable flow alarms - Return temperature display - Frequency converter for pump speed control with automatic mode for energy-optimised operation, or adjustable flow rate (in the operating range of the temperature control system) - Electronic pressure transducer in the flow - Interface via 9-pin D-Sub connector 20mA/TTY - Connection for external temperature sensor PT 100 for measuring and displaying the mould temperature - Continuous bypass of the heat exchanger with a 3-way valve to reduce deposits in the heat exchangers - More powerful pump, hydraulic parts made of VA, magnetically coupled - Tool emptying by suction - Booster pump for tool filling at high temperatures Gjdeftm Hropfx Anleuc - Filling via cooling water can be switched to separate filling - SSR for heating control - IP54 splash water protection Visit our website for more details or for other performance classes. *This unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *Technical Specification: device type: 6/95 heating capacity: 6 kW cooling capacity: 45 kW Medium: water up to 95°C maximum external volume: 50 ltr at 95°C *Equipment hydraulic: - Cooling and filling controlled by solenoid valve - Automatic from cooling water or manual filling (at filling nozzle/option) - Level monitoring by magnet float-switch - Dirt trap in from process line of circulating system and cooling water inlet - Pump reversing for leak-stop operation - Manual mould draining via leak-stop operation and venting by tap at backside of unit - Filling time monitoring and aquatimer - Cool down mode (temperature adjustable) - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow metering *Equipment electrical: - Controller SBCmini, with relay for collective alarm 230V switchable, on the back of controller on terminal - Heating control by SSR - Control cabinet IP54 - Interface 20mA TTY; pinning Arburg - Cekon plug 16A *General equipment: - Corrosion resistant components (stainless stell, brass) - Heating rod made of Incoloy - Unit mounted on rolls, two pieces steerable with break - Additional temperature fuse for safe heating switch-off by contactor *Cooling: Power: 45 kW (stainless steel plate heat exchanger) Cooling water connection: Socket G3/8" IG (Performance data at 80°C flow and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of 3 bar) *Pump: Type: T401 Output rate (max): 40 ltr/min Pressure (max): 3,8 bar Motor capacity: 0,5 kW Construction: submersible pump / peripheral wheel *Dimensions/Weights/Colours Dimensions L/W/H: 514 mm x 238 mm x 493 mm (w/o conne.) Weight: approx. 30 kg Colour: Case: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulating medium int. thread G1/2" Cooling water int. thread G3/8" Godjfnvviopfx Anljuc Filling (option) *This unit complies to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment; customer requests deviating from the standard will be indicated in offers or order confirmations.

Condition: new, *TECHNICAL SPECIFICATION: Heating power hot circuit: 48 kW heating capacity cold circuit: 12 kW cooling capacity hot circuit: 42 kW cooling capacity cold circuit: 270 kW medium: water up to 200°C Max. external volume: 10 ltr at 200°C Max. flow rate: up to 200 l/min  max. delivery pressure: up to 6,5 bar motor power: 5,5 kW Dimension LxWxH: 1.395 x 753 x 1.180 mm Weight approx. 580 kg *HIGHLIGHTS EQUIPMENT: -regulation and control via SPS with touch screen -heating via stainless steel tubular heating elements made of Incolloy -Heating control via solid-state relay -control box IP54 externally ventilated2 -electrical wiring on terminal blocks -pot. free input for signal for cold/warm changeover (front door) - Pot.-free contact for collective alarm on 3-pin plug-in connector (front door) (front door) -temperature control unit with heating and cooling circuit, for connection of a valve station for quick changeover between hot and cold circuit -temperature controlled feed of the return water -level monitoring with automatic level compensation -dirt filter in the cooling water supply and in the return of the circulation system -Separate automatic filling with strainer -Flow measurement in differential pressure principle in both circuits -monitoring of the heating rod surface by temperature sensors -System pressure control, necessary compressed air connection: 6 to 8 bar -booster pump type DS 360 for water make-up -corrosion-resistant components (VA, MS) Gsdpfeg Ey Ufex Anleuc -unit mounted on rollers and ready for connection *OPTIONS: -System EcoTemp for intermittent operation -connection for ext temperature sensor PT100 or type J/K -Remote touch screen with 15 m cable Visit our website for more details or for other performance classes. *This device is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW medium: water up to 200°C Max. external volume: 43 ltr at 200°C max. Flow rate: max. 230 l/min  max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions LxWxH: 1,460 x 525 x 1,200 mm  Weight approx. 330kg Circulation medium connection: flange DN40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Control and regulation Smart Controller (7" touch display) -Heating control via solid-state relay -Control box IP54, externally ventilated -Expansion tank, heater and piping stainless steel -Heating via stainless steel tubular heating elements made of Incolloy -Dirt trap (circulation) -Unit ready for connection and mounted on castors, 2 of them steerable and with brake -Cooling and filling controlled by solenoid valve -configurable automatic filling via KW inflow or separate connection (factory-supplied via cooling water inflow) -flow measurement by differential pressure principle -Level monitoring by magnetic float switch -automatic temperature-dependent system closure (not with WP7-90) -flow monitoring by recording the flow rate -Bypass between flow and return with reduced cross-section -dirty filter in the cooling water inflow, filling and return of the circulation system -Continuous bypass of the heat exchanger via 3-way motorised control valve (WP7-180/200) -System pressure monitoring via pressure transmitter in the AD tank (WP7-150/180/200) -Pressure booster pump for system filling (WP7-180/200, otherwise optional) -Safety temperature limiter (STB) in the heater and flow (WP7-200) -Pressure gauge in the supply line on the back of the unit -heat-insulated circulation circuit (WP7-150/180/200) Gsdpfx Anog Ey T Ejlsuc Visit our website for more details or for other performance classes. *This unit is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: used, functionality: fully functional, Workpiece diameter: 1 – 18 mm Cutting discs up to: 100 x 1 mm Guedpfey Rugasx Anlec Bore: 20 mm

Condition: excellent (used), functionality: fully functional, Manufacturer Günther Model DP15/10 10 sections With cable Guodpfx Anowqgxhslec PRICE REDUCTION FROM 1,250 TO 1,000 EUR!!!

Condition: good (used), Year of construction: 2005, I will sell Remak 29.5KW. Efficient. Godpfov H Silex Anlouc

Condition: excellent (used), For sale, Form thermostat - Tool Temp TT-188 Max. heating temperature - 90°C Medium - water Power: 9850 Watts The device has: - vacuum pump vaccum - vacuum tank Gjdpfsvzb Nqex Anleuc - function of sucking the medium out of the mold - the device can be integrated with the machine, maintenance-free

Condition: used, Year of construction: 2015, functionality: fully functional, The three temperature control units from BoeTherm are for sale. They have all been tested in my workshop and are fully functional. The price is per unit!!! 1. BT-90-9-D2 from 2011, €1,255 2. BT-95-09-D2-M3-V5 from 2015, €1,255 3. BT-95-09-D2-M3-V5-VA-MS from 2015, €2,250 Medium: Water Gjdpfx Aexpt Rrjnleuc Heating capacity: 9 kW Pump capacity: 84 L/min Pump pressure: 2.8 bar Tank volume: 6 liters Dimensions: L: 650 mm, W: 265 mm, H: 650 mm, Weight: 45 kg

Condition: like new (used), Year of construction: 2019, operating hours: 3,825 h, functionality: fully functional, The Wittmann plus D140 temperature control unit is for sale. The device was used in a technical center, which explains the low operating hours. Original price: €5,260 - Max. water temperature: 140°C in the mold supply line - Max. system pressure: 10 bar in the mold return line - Pump: 0.5 kW (1.4A) / 50Hz, max. 40 l/min, max. 4.5 bar, seal-less and magnetically coupled - Heating capacity: 7.5 - 9 kW (11.5 - 12.5A) at 380 - 415V - Cooling capacity: 20 kW at ΔT = 75°C (indirect cooling) - Operating voltage: 3x 380 – 415 V, 50 Hz - Control voltage: 24V AC - Power consumption: 14.5A / 9.5kW (the total connected load increases if options such as reinforced pump or additional heating capacity are added) - Main connection: 4m cable incl. 16A CEKON plug - WITTMANN 4.0 interface including license, with shielded RJ45 socket - USB port: socket for software updates and data logging - Mold supply and return: G3/4'' female thread - Mold circuit with angle-seat strainer, mesh size 0.25mm Guedpfx Asy Atnyenlsc - Water inlet and outlet: G3/8'' female thread - Strainer in water inlet: G3/8'' female thread, mesh size 0.3mm - Color: RAL7047 (Telegrey 4), front RAL3004 (Purple red) - Weight: Net: 65 kg, Gross: 82 kg (incl. pallet and packaging) - Dimensions (L x W x H): 840 x 265 x 650 mm - Dimensions incl. pallet & packaging (L x W x H): 920 x 630 x 830 mm - Fill volume: 3 liters - Noise level: 70 dB(A) Media: - Process and cooling medium: water

Condition: used, HB‑Therm HB‑100 U1 tempering unit, Tempering, Liquid tempering, Industrial tempering, Thermolator, Used machine Manufacturer: HB‑Therm Type: HB‑100 U1 Overall dimensions: 200 × 650 × 500 mm Guedpfxex Emfwo Anloc Year of manufacture: 2008 Technical data: Maximum operating temperature: 100 °C Heating capacity: 8 kW Cooling capacity: 30 kW Heat transfer medium: Water

Condition: used, HB-Therm HB-100 U1 temperature control unit, Temperature control, Liquid temperature control, Industrial temperature control, Thermolator, used machine Gsdpeyzmagjfx Anlsuc Manufacturer: HB-Therm Type: HB-100 U1 Overall dimensions: 200 × 650 × 500 mm Year of manufacture: 2008 Technical data: Maximum operating temperature: 100 °C Heating capacity: 8 kW Cooling capacity: 30 kW Heat transfer medium: water

Condition: used, Tempering, Circulating fluid tempering, Thermolator, Used machine Guedpfx Anjyrtk Solec Manufacturer: Industrial Frigo Típus: TW 9/95/x Year of manufacture: 2008 Weight: 190 Kg Overall dimensions: 1300 x 450 x 1200 mm Max. temperature: 95 °C Pressure: 4,35 bar Electrical data: 400 V ; 50 Hz ; 26 A ; 10 kW

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Manufacturer: Tool-Temp Type: TT 168 E Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Colour: Silvergrey RAL 7001 Weight: Approx. 67 kg (empty) Gusdpfxex Emfks Anljc Properties: Self-optimizing electronic microprocessor controller (MP-888) Digital display of set and actual values Automatic temperature monitoring Electronic flow control with digital display Automatic minimum flow control Suitable for both water and oil media Temperature range max.: Water: 90 °C Oil: 150 °C Heating capacity: Water: 12 kW / 18 kW (stages: 3/9, 9/9) Oil: 6 kW (stages: 3/3) Cooling capacity: 45 kW at 90 °C Pump capacity: Motor: 0.75 kW Pressure mode: max. 4.0 bar | max. 60 l/min Vacuum mode: max. 8 m H₂O Tank capacity: Min. 16 litres, max. 20 litres Connections: Medium: ½" BSP female thread Cooling water inlet: ¾" BSP female thread (with water filter) Cooling water outlet: ⅜" BSP male thread

Year of construction: 2015, condition: reconditioned (used), New price 2015- 15200€ GWK cooling tower Proven completely overhauled by GWK Gjdjdxlntopfx Anleuc DGUV certificate available

Condition: ready for operation (used), 27 kW, 90 degrees Celsius Two units in stock. Warranty: 6 months. Gujdpszab Syefx Anlec

Condition: ready for operation (used), 12 kW, 140 degrees Celsius. Three units in stock. Guedezab S Hepfx Anlec Warranty: 6 months.

Condition: ready for operation (used), 9 kW, 150 degrees Celsius Two units in stock Warranty: 6 months Gsdpozab A Esfx Anljuc

Condition: good (used), functionality: fully functional, 3 sections Godpsvu Dz Aefx Anleuc Fully functional!

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 185 kg, The oil temperature control unit is new and available immediately Gjdpfx Ansrazg Ujlsuc Medium: Oil Temperature : 300 degrees Indirect cooling : I2 Heating capacity : 12 KW Weight : 123 KG

Condition: used, Year of construction: 2019, functionality: fully functional, 1,0 St. gebr. Temperiergerät mit 48 Regelstellen Hersteller: GAMMAFLUX Typ: GS1G030F024S4EJ Gujdpfxjyxxz Do Anloc Baujahr: 2019

Year of construction: 2012, condition: good (used), Temperature control unit GWK integat it40E-3 Stock no.: 503198 Machine type/ Device type: Temperature control unit Manufacturer: GWK Type: integat it40B-2 Year of manufacture: 2012 The gwk integrat 40 is a modular multi-circuit temperature control system that can be integrated into the overall process for segmented mold temperature control. - The component consists of: Gsdpfjyknrhox Anlsuc - Central module integrat 40 B2-WZ2 (year 2012) - Electrical mold module W1 (year 2012) - Hydraulic mold module W1 (year 2012) - Temperature control module it40 T1 (FY 2012) - Electric mold module W2 (FY 2012) - Hydraulic mold module W2 (FY 2012) - Temperature control module it40 T2 (FY 2012) Connected load: 63 A Max. operating temperature: 95° C Heating capacity: 3 kW / segment Cooling capacity: 27 kW Pump output: 0.5 kW Interface: VARAN Voltage: 400-415V 50Hz Circulation medium: Water/water

Condition: used, Cooling unit Water recooling unit DALEX type DRF 2 Machine no. No. 38913719 Year of construction 1989 Volume flow 0.35 m3/h Cooling capacity 1950 Watt Operating pressure 2 to 3 bar Refrigerant R 134a Unit was converted from R12 to R134a Operating overpressure 18 bar Gujdpfx Anjg D H Ruslsc Pipe connection thread 3/4" Tank volume 600 x 400 x 350 mm = approx. 80 liters Mains connection 380 Volt, 50 Hz Space requirement L x W x H 900 x 800 x 1020 mm Weight 100 kg Good condition